Embedded holonic fault diagnosis of complex transportation systems

The use of electronic equipment and embedded computing technologies in modern complex transportation systems continues to grow in a highly competitive market, in which product maintainability and availability is vital. These technological advances also make fault diagnosis and maintenance interventions much more challenging, since these operations require a deep understanding of the entire system. This paper proposes a holonic cooperative fault diagnosis approach, along with a generic architecture, to increase the embedded diagnosis capabilities of complex transportation systems. This concept is applied to the fault diagnosis of door systems of a railway transportation system.     

Analysis of the Shrinkage Effect on Mass Transfer During Convective Drying of Sawdust/Sludge Mixtures

Convective drying of wastewater sludges and sawdust/sludge mixtures was studied. The first part of this work was an experimental study performed in a cross-flow convective dryer using 500 g of wet material extruded through a disk with circular dies of 12 mm. The results showed that the sawdust addition has a positive impact on the drying process from a mass ratio of 2/8, on a dry basis, with observed drying rates higher than the original sludge. The second part of this work consisted of developing a drying model in order to identify the internal diffusion coefficient and convective mass transfer coefficient from the experimental data. A comparison was made between fitted drying curves, well represented by the Newton's model, and the analytical solutions of the diffusion equation applied to a finite cylinder. Variations of dimensional characteristics, such as the volume and exchange surface of the sample bed, were obtained by X-ray tomography. This technique allowed us to confirm that shrinkage, which is an important phenomenon occurring during sludge and sawdust/sludge mixture drying, must be taken into account. The results showed that both the internal diffusion coefficient and convective mass transfer coefficient were affected by mixing and sawdust addition. The internal diffusion coefficient changed from 7.77 × 10^?9 m²/s for the original sludge to 7.01 × 10^?9 m²/s for the mixed sludge and then increased to 8.35 × 10^?9 m²/s for the mixture of a mass ratio of 4/6. The convective mass transfer coefficient changed from 9.70 × 10^?8 m/s for the original sludge to 8.67 × 10^?8 m/s for the mixed sludge and then increased to 12.09 × 10^?8 m/s for the mixture of a mass ratio of 4/6. These results confirmed that sawdust addition was beneficial to the sludge drying process as the mass transfer efficiency between the air and material increased. Reinforcing the texture of sludge by adding sawdust can increase the drying rate and decrease the drying time, and then the heat energy supply will be reduced significantly. The study also showed that neglecting shrinkage phenomenon resulted in an overestimation for the internal diffusion coefficient for the convective drying of sludges and sawdust/sludge mixtures.     

Syntheses of poly[N-(2,2 dimethoxyethyl)-N-methyl acrylamide] for the immobilization of oligonucleotides

Radical-initiated polymerization of N-(2,2 dimethoxyethyl)-N-methylacrylamide has been carried out either in chloroform or methanol using 2,2′-azobisisobutyronitrile as an initiator, allowing us to prepare acetal containing water-soluble polymers. A kinetic study in both solvents showed that this monomer fairly homopolymerized (k_p · k_t^−1/2 = 1 mol^−1/2 L^1/2 s^−1/2). Static light scattering was used to characterize the molecular weight of these polymers. In addition, the Mark–Houwink–Sakurada relationship was established based on viscosity measurements performed at 25°C in water. Recovery of the aldehyde moieties on the polymer was achieved under mild conditions using a diluted inorganic solution. The analysis of the formation of aldehyde groups was performed by ¹H- and ¹³C-NMR. The covalent binding of oligodeoxyribonucleotides was carried out in water/acetonitrile mixtures with subsequent NaBH₄ reduction of the imine bonds so as to stabilize the polymer/oligodeoxynucleotide conjugates. © 1996 John Wiley & Sons, Inc.     

Weighted least squares estimation of background in EELS imaging

In quantitative Electron Energy Loss Spectrometry, a weighted least squares estimation should theoretically be used to estimate the background law below core edge energy, since the variances of the data vary. However, it is found that proper weighting makes the above edge signal-to-noise ratio decrease rather than increase. This result is discussed, and the influence of the bias introduced by the logarithmic transformation of the data is quantified.     

Influence of deposition parameters on physico-chemical and optical properties of sputtered PbTiO3 thin films

Abstract

Stoichiometric thin films of lead titanate (PbTiO₃) have been grown “in situ” without postannealing on (0001) sapphire substrates by rf magnetron sputtering technique. X-ray diffraction scans have revealed that as-grown films consist of the perovskite phase and are polycrystalline with a high (111) orientation. The structure, the microstructure and the optical properties have been studied as a function of the process parameters i.e., substrate temperature, gas pressure and the target composition, in particular the lead content. We report the dependence of the deposition conditions on the optical constants. The optimum experimental conditions (100m Torr and 600°C) to produce thin films with high transparency and refractive indices (n = 2.61 at 633 nm), similar to values for bulk materials, are given in this paper.     

Ultra‐Performance Liquid Chromatography‐Mass Spectrometry Analysis of Free and Esterified Oxygenated Derivatives from Docosahexaenoic Acid in Rat Brain

Docosahexaenoic acid (DHA), a prominent long‐chain fatty acid of the omega‐3 family, is present at high amount in brain tissues, especially in membrane phospholipids. This polyunsaturated fatty acid is the precursor of various oxygenated lipid mediators involved in diverse physiological and pathophysiological processes. Characterization of DHA‐oxygenated metabolites is therefore crucial for better understanding the biological roles of DHA. In this study, we identified and measured, by ultrahigh‐performance liquid chromatography coupled with tandem mass spectrometry, a number of oxygenated products derived from DHA in exsanguinated and nonexsanguinated brains. These metabolites were found both in free form and esterified in phospholipids. Interestingly, both (R)‐ and (S)‐monohydroxylated fatty acid stereoisomers were observed free and esterified in phospholipids. Monohydroxylated metabolites were the main derivatives; however, measurable amounts of dihydroxylated products such as protectin DX were detected. Moreover, exsanguination allowed discriminating brain oxygenated metabolites from those generated in blood. These results obtained in healthy rats allowed an overview on the brain oxygenated metabolism of DHA, which deserves further research in pathophysiological conditions, especially in neurodegenerative diseases.     

P2X7 Receptors and TMEM16 Channels Are Functionally Coupled with Implications for Macropore Formation and Current Facilitation

P2X7 receptors (P2X7) are cationic channels involved in many diseases. Following their activation by extracellular ATP, distinct signaling pathways are triggered, which lead to various physiological responses such as the secretion of pro-inflammatory cytokines or the modulation of cell death. P2X7 also exhibit unique behaviors, such as “macropore” formation, which corresponds to enhanced large molecule cell membrane permeability and current facilitation, which is caused by prolonged activation. These two phenomena have often been confounded but, thus far, no clear mechanisms have been resolved. Here, by combining different approaches including whole-cell and single-channel recordings, pharmacological and biochemical assays, CRISPR/Cas9 technology and cell imaging, we provide evidence that current facilitation and macropore formation involve functional complexes comprised of P2X7 and TMEM16, a family of Ca²⁺-activated ion channel/scramblases. We found that current facilitation results in an increase of functional complex-embedded P2X7 open probability, a result that is recapitulated by plasma membrane cholesterol depletion. We further show that macropore formation entails two distinct large molecule permeation components, one of which requires functional complexes featuring TMEM16F subtype, the other likely being direct permeation through the P2X7 pore itself. Such functional complexes can be considered to represent a regulatory hub that may orchestrate distinct P2X7 functionalities.     

Rheology evolution of a geopolymer precursor aqueous suspension during aging

Geopolymer-based glass-ceramic matrix composites can be processed at room temperature and a heat treatment below 100°C leads to matrix hardening thanks to the geopolymerization mechanisms. The stabilization of the matrix into glass-ceramics is achieved via a post-curing at high temperature. This paves the way of the utilization of cost-effective liquid composite molding processes, for which all the necessary equipment is already available for processing temperature ranges related to polymer matrix composites, provided that the rheological behavior of the precursor is suitable to conveniently permeate the fibrous preform. The paper describes the thixotropic rheological behavior of a reference suspension at processing temperature (10°C-20°C) and its evolution along aging at −18°C. The changes are interpreted in terms of geopolymerization mechanisms (dissolution and polycondensation) and suspension rheology (predominance of hydrodynamic effects at high shear rate). On this basis, a phenomenological modeling framework, combining two Krieger-Dougherty equations, is proposed to build a relationship between the effective viscosity of the suspension and the phenomena involved during aging (dissolution of aluminosilicate particles) and shearing (microstructure scalar variable).