Damage of polymers studied by micro-Fourier Transform Raman spectroscopy

Summary The potential of the micro-Fourier Transform Raman tool in examining specific localized regions in polymeric materials with some degree of fluorescence when analyzed by conventional Raman spectroscopy is examined. Analysis of characteristic bands of the vibrational spectra obtained in a small area damaged by a visible and NIR laser beam in commercial Polyethylene Terephthalate (PET) shows a different conformer ratio than that observed in a non irradiated zone.     

Kinetic study of the hydrolysis of isocyanic acid in the gas phase

The hydrolysis of isocyanic acid in the gaseous phase has been investigated at temperatures between 553 and 613 K by mass spectrometry and evaluated to obtain the corresponding kinetic data. The reaction order and reaction constant have been determined. Finally, the influence of water on the catalysed formation of melamine from isocyanic acid under the operating conditions employed has been investigated in order to determine whether there is a need to try the process gas.     

Generation of chromosome fragment specific bovine DNA sequences by microdissection and DOP-PCR

Trends in causative organisms and sources of infection were studied in a series of 288 episodes of bacteremia in neutropenic cancer patients observed in a single institution from 1986 to 1993. The incidence of bacteremia increased significantly from 20 episodes per 1000 admissions in 1986 to 50 episodes per 1000 admissions in 1993 (p = 0.00001). Over the study period, a continuous increment in gram-positive bacteremia, which reached 81% of episodes in 1993 (p = 0.000001), was observed. Conversely, the incidence of gram-negative bacteremia remained stable. Coagulase-negative staphylococci and viridans group streptococci were the most commonly isolated pathogens. Bacteremia caused by coagulase-negative staphylococci increased from 3 episodes per 1000 admissions to 19 episodes per 1000 admissions (p = 0.0001), and viridans group streptococci bacteremia increased from 0 episodes per 1000 admissions to 19 episodes per 1000 admissions (p = 0.000001). The upward trend in gram-positive bacteremia appeared to be related to a significant increase in both intravascular catheters (p = 0.003) and oral mucositis (p = 0.003) as sources of infection. Specific strategies to prevent chemotherapy-induced mucositis and catheter-related bacteremia merit further investigations.     

Transmit permission control on spread ALOHA packets in LEOsatellite systems

A transmit permission control method for improving the throughput characteristics of a low Earth orbit (LEO) satellite communication system employing spread-slotted ALOHA multiple-access scheme is proposed. Both nonfading and fading satellite links are considered. The basic idea of the proposed scheme is to decrease the level of interference at each satellite and, hence, to increase the probability of packet success, by prohibiting the packet transmission from the users with relatively high propagation loss to their connecting satellites. It is shown that the method has the ability to improve the throughput performance in heavy traffic loads and the peak value of the throughput, significantly. It is also shown that the average delay performance of the system employing the proposed scheme is superior to that of the conventional system at heavy traffic loads     

The master curve and the constitutive equation for creep deformation and fracture for Cr-Mo-V steel throughout smooth,notched and precracked specimens

It has been shown experimentally that the master curve for creep deformation versus the ratio of time to fracture time, can be obtained for smooth, notched and precracked specimens of Cr-Mo-V steel, a high-temperature ductile material. A simple unified constitutive equation, i.e. a master curve equation, has been proposed. It is suggested that there is some correlation between the creep deformation fracture curve and the creep damage size master curve. Although the range of the applicability of methodology might be rather limited, the development of this concept is needed for improved long-term creep lives and for other creep ductile materials.     

Transient and dynamic average-value modeling of synchronous machinefed load-commutated converters

A new average-value model of a synchronous machine fed load-commutated converter is set forth in which the stator dynamics are combined with the DC link dynamics. This model is shown to he extremely accurate in predicting system transients and in predicting frequency-domain characteristics such as the impedance looking into the synchronous machine fed load-commutated converter. The model is verified against a detailed computer simulation and against a hardware test system, thus providing a three-way comparison. The proposed model is shown to be much more accurate than models in which the stator dynamics are neglected     

KGa-priderite and related compound for the selective reduction of nitrogen monoxide with propylene

The catalytic activity of KGa-priderite, K_1.6Ga_1.6Ti_6.4O₁₆, and its related compound KGa₈Ga₉Ti₁₅O₅₆ was investigated for the selective reduction of nitrogen monoxide (NO) with propylene (C₃H₆) in the presence of high oxygen concentrations. The KGa-priderite showed significant activity during this reaction, but the related compound showed only a little activity. These compounds are quite different from the conventional catalysts for NO_x selective reduction and are characterized by the fact that their properties are free from the effects of solid acidity and support metals. This difference was attributable to the NO desorption rate at the surface of these compounds. It has become clear that the KGa-priderite catalyst remarkably adsorbed NO, and it is suggested that the amount of NO adsorbed and the amount of catalytic activity are able to be increased by the design of priderite structure.     

Mathematical and experimental investigation of the self-propagating high-temperature synthesis (SHS) of TiAl3 and Ni3Al intermetallic compounds

One-dimensional mathematical modeling was used to describe the self-propagating high-temperature synthesis (SHS) process for preparing TiAl₃ and Ni₃Al intermetallics. The kinetic parameters (activation energies and pre-exponential factors) for the two compounds were obtained by matching experimental measurement and the numerical solution. The results thus obtained were compared with rate parameters obtained using different methods. The activation energy was 483 and 283 kJ mol^?1 for the formation of TiAl₃ and Ni₃Al, respectively. The temperature profiles calculated using the mathematical model were compared with experimental measurements for both aluminides which indicated reasonable agreement. Fine particle size and moderate preheating increase the SHS rates.     

The use of force modulation microscopy to investigate block copolymer morphology

Force modulation microscopy (FMM) is used to characterize the external surface and internal fracture surface morphologies of three different block copolymer samples. A roll-cast poly(styrene-butadiene-styrene) triblock copolymer film, spin-coated poly(styrene-b-methyl methacrylate) thin films, and an ultrathin poly(styrene-b-hexyl isocyanate) rod-coil block copolymer film were investigated. For each sample, height and elasticity images were obtained for the same areas allowing direct comparison. The elasticity images obtained using force modulation microscopy were independent of surface roughness and found to exhibit better contrast and spatial resolution of the respective block copolymer domains than the height images. The lateral resolution of the elasticity images was sufficient to show microphase separated domains having length scales as small as about 10 nm. The poly(styrene-b-methyl methacrylate) samples demonstrate that FMM can even be successfully used to study block copolymers in which both blocks are glassy under the conditions of measurement.