Extraction of halide quaternary salts in an organic solvent/water system: Hydrodynamics and mass transfer

The hydrodynamic characteristics and mass transfers of halide quaternary salts between two immiscible phases in a stirred membrane permeation cell were investigated. The concentration of quaternary salt, temperature, solvent and the four kinds of halide quaternary salts were evaluated to achieve the extractive optimum condition. The diffusivity, overall mass‐transfer coefficients and individual mass‐transfer coefficients were determined and correlated in terms of the conventional Sh‐Re‐Sc relationship. The transfer time of quaternary salts across the membrane and the thickness of the hydrodynamic diffusion boundary layer were determined as well, so as to characterize the extractive phenomenon of quaternary salts between the two phases that is useful in phase‐transfer catalysis.     

Effect of degumming on the tensile properties of silkworm (Bombyx mori) silk fiber

Forcibly reeled silkworm (Bombyx mori) silk was used to study how exposure to a degumming treatment (boiling in distilled water for 30 min) affects tensile properties. Because forcibly reeled and naturally spun fibers exhibit comparable mechanical behavior, the results can be generalized to material obtained conventionally from cocoons. The effects of degumming include: a decrease in the initial elastic modulus, a decrease in the stress at the proportional limit (yield strength), a change in the qualitative shape of force‐displacement curves, and significant qualitative and quantitative variability in force‐displacement data from samples subjected to nominally identical degumming histories. Immersion in water at room temperature or heating in air at 100°C for 30 min are both qualitatively equivalent to a 30‐min degumming treatment in boiling water, in terms of the effect on silk tensile properties. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1431–1437, 2002; DOI 10.1002/app.10366     

Structure and damping properties of polydimethylsiloxane and polymethacrylate sequential interpenetrating polymer networks

By using the technology of the sequential interpenetrating polymer network, a series of novel damping materials based on a polydimethylsiloxane (PDMS)/polyacrylate (PAC) matrix with polymethacrylate (PMAC) were synthesized. They have a controllable broad transition peak spanning the temperature range of 150–220°C and the medial value of loss factor with maximum of 0.35–0.60. Dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and atomic force microscopy (AFM) were applied to analyze and characterize the transition behavior and the microphase structure of the materials. It was found that the size and height of a transition peak at both the low‐ and the high‐temperature zones change as a function not only of the concentration of PMAC and PDMS but also of the kind of PMAC; simultaneously, the low‐ temperature behavior was also governed by the crystallization of PDMS. The content of the crosslinking agent exerts a significant influence on the configuration of the curves of the transition peaks. AFM shows a characteristic phase morphology of double‐phase continuity containing a transition layer and domain less than 1 μm, indicating that the interwoven multilayer networks are the key to incorporation of the immiscible components and form a broad damping functional region. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 545–551, 2002     

Synthesis and characterization of novel copolymers with the trimethylsilyl group for deep‐UV photoresists

N‐(4‐Acetoxyphenyl) maleimide (APMI) and three kinds of comonomers bearing a trimethylsilyl group were copolymerized at 60°C in the presence of azobisisobutyronitrile (AIBN) as an initiator in 1,4‐dioxane to obtain the three IP, IIP, and IIIP copolymers. These copolymers were removed from the acetoxy group in a transesterification process into new IVP, VP, and VIP copolymers with a pendant hydroxyl group. Two modified processes were adopted to prepare photoresists using these copolymers. The first process involved mixing the dissolution inhibitor, o‐nitrobenzyl cholate, with the new copolymers. Second, o‐nitrobenzyl cholate was introduced into the copolymers using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) in dimethylformamide (DMF). The cyclic maleimide structure is responsible for the high thermal stability of these copolymers. After irradiation using deep–UV light and development with aqueous Na₂CO₃ (0.01 wt %), the developed patterns showed positive images and exhibited good adhesion to the silicon wafer without using any adhesion promoter. The resolution of these resists was at least 0.8 μm and an oxygen‐plasma etching rate was 1/5.3 to that of hard‐baked HPR‐204. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2791–2798, 2002; DOI 10.1002/app.10255     

Preparation of core–shell type nanoparticles of diblock copolymers of poly(L‐lactide)/poly(ethylene glycol) and their characterization in vitro

Core–shell type nanoparticles of poly(L ‐lactide)/poly(ethylene glycol) (LE) diblock copolymer were prepared by a dialysis technique. Their size was confirmed as 40–70 nm using photon correlation spectroscopy. The ¹H‐NMR analysis confirmed the formation of core–shell type nanoparticles and drug loading. The particle size, drug loading, and drug release rate of the LE nanoparticles were slightly changed by the initial solvents that were used. The drug release behavior of LE core–shell type nanoparticles showed an initial burst during the first 12 h and then a sustained release until 100 h. The degradation behavior of LE block copolymer nanoparticles was divided into three phases: the initial rapid degradation phase, the stationary phase, and the rapid degradation phase until complete degradation. It was suggested that lidocaine release kinetics were predominantly governed by the diffusion mechanism in the initial burst phase and after that by both of the diffusion and degradation mechanisms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2625–2634, 2002     

Use of Explosives on The Moon

The utilization of explosives for excavation on the lunar surface is under serious consideration as a part of the design for construction of temporary and permanent bases. An excavation research program has shown that small‐scale explosives blasting in a lunar‐soil simulant will greatly reduce the digging forces required for scoop and dragline excavators. Some crater‐blasting parameters were determined for the lunar soil simulant at one Earth gravity and at 10 Earth gravities using a centrifuge. The size of the craters produced at 10 Earth gs matched those formed at one earth g by scaling according to the weight of the explosive. These data can be applied to explosive‐excavation problems such as habitat construction, burial of nuclear power sources, and the rapid construction of shelters remote from the main base to shield against solar‐flare activity.     

Production and properties of micro‐porous glas bubble zinc and aluminium composites

Micro‐porous syntactic foams were produced by means of integration of glass bubbles into aluminium and zinc matrices. Preforms of glass bubbles were pressure infiltrated with the alloys AlSi9Cu9 ans ZnAl4Cu using squeeze casting. The preforms were sintered thermically without the use of bonding agents. Using the combination of different sintering steps syntactic foams with locally different densities could be produced. The mechanical properties of the foams were tested indicating a high compression strength of the foams and a very good compression energy absorption. Furthermore, corrosion behaviour and behaviour at higher temperatures were investigated.     

A new design method for prestressed concrete continuous flat slabs

This paper presents a simple but relatively accurate procedure for the analysis of unbonded prestressed continuous flat slabs. Bi‐circular curves instead of conventional parabolic ones are introduced to obtain the characteristic parameters of the curved tendon profiles. Based on the proposed tendon profile and theory of thin plates, a series of simple formulae are derived to compute the bending moments of flat slabs. The validity of the proposed method is demonstrated by comparing the results with those obtained from finite element analysis. The results of the analysis presented in this paper indicate that the proposed method turns out to be convenient and reasonably accurate in the analysis of prestressed flat slabs. Copyright © 2004 John Wiley & Sons, Ltd.     

From information to probability: An axiomatic approach—Inference is information processing

We define the very rich language of composed conditionals on a three‐valued logic and use this language as the communication tool between man and machine. Communication takes place for three reasons: knowledge acquisition, query, and response. Learning, thinking, and answering questions are of a pure information theoretical nature. The pivot of this knowledge processing concept is the amount of information (bit) we receive if a conditional becomes true. We follow an axiomatic approach to information theory rather than the classical probabilistic approach of Shannon; information comes first, and then comes probability. In the light of this philosophy, query and response experience new interpretations. Both, acquisition and response are realized by maximizing entropy and minimizing relative entropy, respectively. The iterative solution of these mathematical optimization problems gives new insights into the adaptation of prior knowledge to new information. Our expert system shell SPIRIT supports this kind of knowledge processing, which will be established by suitable examples. © 2003 Wiley Periodicals, Inc.     

Dynamic Analysis of Truss‐Beam System

As the manned exploration of space continues, many complex structural components are being developed to construct the orbital platforms that will be used to house communication hardware, personnel, and manufacturing complexes. These components are extremely flexible and complex in their behavior. There is a need for a simple method for determining the dynamic characteristics of these space structures with a minimum of effort. A mathematical model of one of these structural elements, an articulating truss beam, has been developed to predict its dynamic response. Assumptions of the force interaction between the beam elements and the joints have been made for using this model. Algorithms are provided to determine the flexibility matrix of the truss beam for use in the equation of motion. The natural frequencies obtained from using this method are compared with those obtained by the finite element method. An experimental procedure is planned to validate the results from the theoretical method.