Montmorillonite as support for peroxide in the melt grafting of maleic anhydride onto polypropylene

Grafting of maleic anhydride onto polypropylene was performed in a Haake torque rheometer, in the presence of organically modified montmorillonite, MMT (used as support for the peroxide), according to a 2³ factorial design, where the maleic anhydride concentration (C_MA), peroxide concentration (C_per) and reaction time (t_r) were varied. For comparison, the reaction in the absence of MMT was also conducted. Polypropylene degradation was assessed by parallel plate rheometry and size exclusion chromatography (SEC) and percentage of reacted maleic anhydride (%MA_g) was obtained by titration and FTIR spectroscopy. The results showed differences in both systems, conventional and in the presence of MMT. The structure of polypropylene grafted with maleic anhydride, PP‐g‐MA, indicates longer branches are formed in the presence of MMT compared to in its absence, demonstrated by FTIR analysis. As in conventional reaction systems, an increase in C_per caused an increase in %MA_g and a reduction in molar mass. The variable C_MA showed to be not significant in the grafting reaction in the presence of MMT, even at high DCP levels, at a 5% significance level. On the other hand, increase in C_MA resulted in significant increase in viscosity. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44134.     

Design and optimization of thermo-electrochemical cells

Thermo-electrochemical cells (or thermocells) convert thermal energy to electricity in continuous operation based on a balance of ion conduction and redox reactions at hot and cold electrodes. In this study, the fundamental governing equations for mass and heat transfer, fluid dynamics, and electrokinetics in thermocells are presented and solved numerically using COMSOL. A parametric study is performed to explore the limitations and optimal cell dimensions for maximum energy conversion efficiency in thermocells. Series-stacking designs are demonstrated to have the potential to increase conversion efficiency by 100 % compared to a single cell configuration. Natural convection is shown to significantly increase the conversion efficiency of thermocells with conventional aqueous electrolyte (0.4 M potassium ferri/ferrocyanide), by compressing the diffusive boundary layers. A flow cell thermocell design is also considered. Results reveal that the ohmic resistance of the electrolyte limits the energy conversion efficiency of this design.     

The effect of different porous media on moisture loss and oil absorption profiles during frying using glass micromodels

Microstructure plays a key role in oil absorption during frying. The aim of this work was to improve our understanding of the relationship between microstructure and oil absorption, through the use of glass micromodels to obtain evidence of transport phenomena in three porous networks. Micromodels were saturated with water and partially immersed in oil at 190°C. Moisture and oil profiles were imaged to get water and oil saturation maps. Image and fractal analyses were performed to describe the morphology of the evaporation and oil fronts. Results showed that higher porosity facilitated the moisture removal and promoted greater oil absorption during cooling. The fractal dimension showed that microstructures with a relatively high number of fine capillaries were less stable and propitiated fingering during the advance of the evaporation front. In all matrices, the disruption of the surface oil film due to air penetration was a critical factor to stop oil imbibition. © 2015 American Institute of Chemical Engineers AIChE J, 62: 629–638, 2016     

Organochlorine Formation in Tertiary Amine Catalyzed Pulp Bleaching

An oxygen delignified eucalyptus kraft pulp was bleached by applying a catalytic amount of a tertiary amine, 1,4-diazabicyclo[2,2,2]octane, and hypochlorous acid at varying pH, temperature, and time. The bleaching filtrate was analyzed for chloroform and AOX and the pulp for residual lignin, hexenuronic acid, and OX. In comparison with chlorine dioxide bleaching, the novel catalytic bleaching (pH < 6) generated only traces of chloroform and low contents of AOX and OX. Separate catalytic oxidations of authentic hexenuronic acid showed that it was a major precursor of chloroform. The results demonstrate a practical way to reduce organochlorine formation in pulp bleaching and provide new understanding on the reaction pathways that yield chloroform.     

Composites made from a soybean oil biopolyurethane and cellulose nanocrystals

Cellulose nanocrystals (CNC) obtained by acidic hydrolysis from microcrystalline cellulose were dispersed in a biopolyurethane matrix to prepare composite films. The polyurethane was prepared from a hydroxylated soybean oil (SO‐OH) and a polymeric diphenyldiisocyanate (pMDI), using a organotin compound as the catalyst. The composite films contained different concentrations of nanocelullose, without any macroscopic aggregates in all cases. Thermal, tensile and dynamic mechanical properties of the films were determined for all the samples. In particular, it was observed that the glass transition temperature of the nanocomposites slightly increased with the concentration of the cellulose nanocrystals. The nanocomposite with 1 wt% of nanocellulose showed the highest tensile strength of the series. POLYM. ENG. SCI., 58:125–132, 2018. © 2017 Society of Plastics Engineers