Use of recycled copper slag for blended cements

Copper slag is a by‐product generated during smelting to extract copper metal from the ore. The copper slag obtained may exhibit pozzolanic activity and may therefore be used in the manufacture of addition‐containing cements. In this paper the effect of the incorporation of the copper slag in cement is measured. Blends of copper slag with Portland cement generally possess properties equivalent to Portland cement containing fly ash, but very different to the silica fume incorporation. Copper slag and fly ash reduce the heat of hydration more effectively than silica fume in mortars. The replacement of 30% cement by copper slag reduces the flexural and compressive strength in a similar way to fly ash; however, after 28 days, the reduction is less than the percentage of substitution. Hydrated calcium aluminate phases were analysed using scanning electron microscopy (SEM) and X‐ray diffraction (XRD) techniques. The pozzolanic activity of copper slag is similar to that of fly ash and higher than silica fume. In the presence of low water/cement ratios, certain pozzolanic materials produce a very compact cement paste that limits the space available for hydration products, a determining factor in the formation of hydrated calcium aluminates. SEM was found to be a useful analytical technique when aluminates are formed and can be clearly detected by XRD. Copyright © 2008 Society of Chemical Industry     

Time Decay of the Activity of the Reduction Reaction of NO by CO on a Pd/Al2O3 Catalyst

An experimental study is made of the time decay of activity of the CO–NO reaction on a Pd/Al₂O₃ looking at the effect on reaction order and apparent activation energy. The optimum kinetics parameters fitting the steady state data at moderate pressures are determined. The time decay curves are analyzed through various catalyst deactivation models.     

Formaldehyde content of milk in goats fed formaldehyde-treated soybean oil-meal

Formaldehyde is used in ruminant feeding for different purposes including the protection of dietary proteins from ruminal degradation. The formaldehyde content of milk of goats fed various levels of formaldehyde-treated soybean oil-meal has been determined by using a sensitive HPLC method. Results showed a significant linear correlation between ingested formaldehyde and formaldehyde concentration in milk. About 0.02% of ingested formaldehyde was excreted in milk, as free formaldehyde.     

Analytical results for the plectonemic response of supercoiled DNA

The DNA molecule is modeled as an elastic rod with bending and twisting rigidities, subjected to external tension and twist applied at one end, the other end being clamped. We study the plectonemic equilibrium of such a rod, taking into account the impenetrability constraint. Numerical solutions of this boundary value problem have previously shown that purely elastic models can reproduce the supercoiling response of the DNA molecule. Using a variational approach, we derive analytical formulae for the elastic response of the filament, and extend former numerical results.     

Bioavailability and Toxicity of Metal Nutrients during Anaerobic Digestion

This paper investigates the effect of chelating agents on the bioavailability of Fe and Cu during anaerobic digestion. The results on metal speciation and methane production in anaerobic serum bottles showed that biomass was able to grow in the presence of citrate 1?mM and nitrilotriacetic acid (NTA) 1?mM, suggesting that the binding sites at the cell surface competed efficiently for the metals with the chelating agents added. The presence of free ethylenediaminetetraacetic acid 1?mM inhibited methanogenesis, and this seemed to be related to a loss in metal uptake capacity. Although the addition of soluble microbial products (SMP) did not change metal distribution in anaerobic systems, it caused an increase in the rate of methane production, and it is believed that direct uptake of Cu-SMP complexes was responsible for this increase. The best protection against Cu toxicity occurred when stoichiometric amounts of NTA, which should complex and solubilize most of the Cu, was added, and it is likely that NTA prevented lethal concentrations of Cu from being adsorbed onto the cell and hence internalized.     

Structural Response of Nuclear Containment Shield Buildings with Construction Openings

Steam generator replacement at nuclear power plants requires large construction openings in nuclear containment structures. This study examines the effects of such openings placed in a 61?cm (2?ft) thick dome of a shield building. The dome is cast in two layers, and the limiting cases of the two layers acting as one and the lower layer carrying the entire load are considered. Without openings, the stresses due to dead load in the structure are very low when compared to the material strength. With openings, the loads are easily redistributed around the opening, and the maximum stresses for the conservative case are between three and four and one-half times larger than in the original structure with no openings. The extent of the affected area around the holes is relatively small. Smooth corners in the openings are necessary to avoid high local stress concentrations.     

Real-time control of video surveillance systems with program supervision techniques

In this article, we describe a knowledge-based controlled platform using program supervision techniques. This platform eases the creation and the configuration of video surveillance systems. Several issues need to be addressed to provide a correct system configuration: (1) to choose, among a library of programs, those which are best satisfying a given user request, (2) to assign a correct value for each program parameter, (3) to evaluate performances and to guarantee a performance rate which is satisfactory regarding end-user requirements. This platform is composed of three main components: the library of programs, the knowledge base and the control component. The knowledge is either given by experts or learnt by the system. The control is generic in the sense that it is independent of any application. To validate this platform, we have built and evaluated six video surveillance systems which are featured with three properties: adaptability, reliability and real-time processing.     

The held out wings (how) Drosophila gene encodes a putative RNA-binding protein involved in the control of muscular and cardiac activity

In an attempt to identify genes that are involved in Drosophila embryonic cardiac development, we have cloned and characterized a gene whose function is required late in embryogenesis to control heart rate and muscular activity. This gene has been named held out wings (how) because hypomorphic mutant alleles produce adult animals that have lost their ability to fly and that keep their wings horizontal at a 90 degree angle from the body axis. In contrast to the late phenotype observed in null mutants, the How protein is expressed early in the invaginating mesoderm and this expression is apparently under the control of twist. When the different mesodermal lineages segregate, the expression of How becomes restricted to the myogenic lineage, including the cardioblasts and probably all the myoblasts. Antibodies directed against the protein demonstrate that How is localized to the nucleus. how encodes a protein containing one KH-domain which has been implicated in binding RNA. how is highly related to the mouse quaking gene which plays a role at least in myelination and that could serve to link a signal transduction pathway to the control of mRNA metabolism. The properties of the how gene described herein suggest that this gene participates in the control of expression of as yet unidentified target mRNAs coding for proteins essential to cardiac and muscular activity.     

Cooperation of Ito cells and hepatocytes in the deposition of an extracellular matrix in vitro

Cellular and molecular mechanisms involved in the deposition of extracellular matrix components in both normal and fibrotic liver are still poorly understood. We have investigated the influence of cooperation between Ito cells and hepatocytes in matrix deposition in vitro. Immunoprecipitation of radiolabeled proteins from media of 5-day-old Ito cell primary cultures showed that these cells secreted high levels of the major basement membrane components, ie, collagen IV, laminin, and entactin/nidogen. By immunocytochemistry, precursors of basement membrane components were found intracellularly, but only scarce deposits were seen around the cells. When hepatocytes were added to 2-day-old Ito cell primary cultures, they established close contacts with Ito cells in less than 24 hours and expressed ZO-1, a tight junction-associated protein not detectable in standard hepatocyte culture. Cytochemistry analysis revealed an abundant extracellular matrix deposited over hepatocyte cords and between hepatocytes and Ito cells. Immunocytochemistry studies showed that this matrix contained laminin, fibronectin, and collagens proIII and IV. These data indicate that a high level of matrix protein synthesis by liver cells in vitro is not sufficient to induce extracellular matrix deposition, and that cell-cell interactions are strongly involved in this process. Hepatocyte/Ito cell co-culture, which may reflect the actual situation in vivo, represents a useful tool for studying liver fibrogenesis.