Gel formation in diimide‐hydrogenated polymers

The hydrogenation of diene‐based polymers via diimide is a very attractive alternative to the conventional catalytic hydrogenation route based on gaseous molecular hydrogen. However, serious crosslinking always accompanies it and limits the end‐use properties of the polymers. Gel formation in polymers that are hydrogenated via diimide has been investigated in detail through an inspection of all the chemical reactions involved in the process. The results indicate that hydrogen peroxide decomposition, some reactions related to oxygen, and the redox reaction between hydrogen peroxide and hydrazine are capable of generating radicals. However, radicals generated in the aqueous phase do not appear to initiate the crosslinking of diene‐based polymers in the latex form. It is proposed that the primary radicals giving rise to crosslinking are generated in the polymer phase in situ, and the step responsible for generating these organic radicals is possibly the diimide disproportionation reaction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1122–1125, 2005     

CacO3在PP和PP/mPE共混物基体中的作用比较

研究CaCO3填料在取丙烯（PP）和茂金属聚乙烯（mPE)弹性体增韧PP共混物（PP／mPE)2种基体中的不同作用。结果表明：在PP基体中，填料显著提高其刚性，而在共混物基体中，由于弹性体的存在，填料的增强作用减弱；弹性体能够改善填料粒子和基体的界面粘合，增大弹性体分散相的尺寸，使PP/mPE共混物的拉伸断裂韧性提高。低温下（－30℃）的Charpy缺口冲击实验表明：少量的CaCO3即可导致PP/mPE体系冲击强度的迅速下降。     

基于CAD/CAE/CAM/RP的复杂陶瓷产品快速制造技术

针对目前手工方式的卫生洁具等复杂陶瓷产品的研发过程,借鉴CAD/CAE/CAM/RP技术在其它制造行业中应用的成功经验,将这些先进制造技术应用于卫生洁具等复杂陶瓷产品的研发中;CAD用于设计产品和模具的模型,CAE用于模拟洁具冲水过程和分析冲水性能,RP用于制作洁具产品的原型,CAM用于加工试用石膏工作模具。就这些技术的应用提出了两种主要方案,并分析了各自的特点。经过实际应用表明:先进制造技术的应用能大大缩短产品研发周期、提高产品质量、降低开发成本。     

A PROCEDURE FOR EVALUATION OF COMMERCIAL FCC CATALYSTS

Based on the correlations between laboratory units and commercial plants, a procedure has been developed to guide commercial FCC (Fluid Catalytic Cracking) catalysts selection. Examining the operability of catalyst mixtures during catalyst transition period is emphasized. The testing procedure is simple and reliable. A commercially available catalyst and the catalyst currently in use have been compared to demonstrate the applicability of this procedure. The commercial testing has confirmed the reliability of laboratory results. The use of the catalyst evaluated led to a 30% saving in catalyst cost.     

聚合物乳液的稳定性

简要讨论了乳液稳定性的原理,综述了乳液配方、乳胶粒组成和结构对聚合物乳液电解质稳定性、机械稳定性、冻融稳定性和贮存稳定性的影响。     

神经网络在聚合过程中的应用

介绍了神经网络在聚合反应过程中的建模，预测、优化，控制和故障诊断及模式识别方面的应用，讨论了其优点和局限性，并分析今后神经网络的发展趋势。     

Preparation of NaBiO3 and the electrochemical characteristic of manganese dioxide doped with NaBiO3

NaBiO₃ crystal of high purity has been synthesized through chemical oxidization. The morphology and thermal stability of NaBiO₃ were examined with scanning electron microscope (SEM) and thermogravimetry-differential scanning calorimetry (TG-DSC). The electrochemical properties of MnO₂ electrodes with and without doping NaBiO₃ were studied through galvanostatic charge/discharge and cyclic voltammetry. The results indicate that the MnO₂ electrode doped with NaBiO₃ possesses remarkably higher discharge voltage and capacity and better reversibility than the pure MnO₂ electrode and Bi₂O₃ doping MnO₂ electrode.     

甲醇/正己烷的渗透汽化分离的研究 Ⅰ.渗透汽化膜的研制

本文研制了从甲醇／正己烷体系中分离甲醇的渗透汽化复合膜ＣＡ／ＰＡＮ（ＰＥＳ）、ＰＶＡ／ＰＡＮ（ＰＥＳ）。实验证明膜对该体系有较高的选择分离性和良好的渗透性，当进料甲醇浓度为３％时，渗透通量Ｊ≈０．６００ｋｇ／ｈ·ｍ２，分离因子α→∝。本文还考察了不同操作条件对膜分离性能的影响及膜的稳定性和均匀性。     

化学微交联聚氯乙烯的结构和性能

通过氯乙烯/邻苯二甲酸二烯丙酯(VC/DAP)悬浮共聚,合成了含部分凝胶结构的化学微交联PVC树脂,对微交联PVC的玻璃化转变行为、加工性能、消光性能、加热-形变行为和力学性能进行了研究。当DAP用量在0.25%mol以下时,PVC的玻璃化温度变动不大。凝胶含量的增加将导致交联PVC_d~T的光泽度下降,消光性能提高;塑化时间和加工扭矩均增加,加工性能急剧变差;加热变形值下降,最高使用温度提高。凝胶对PVC拉伸性能的影响较为复杂,但压缩永久变形则随凝胶含量的增加而下降,材料的弹性性能逐渐提高。     

施釉机器人静力学分析的研究

根据6自由度施釉机器人的终端受力，利用雅可比矩阵，求解出各转动关节在稳定平衡状态下的受力和所需的驱动力矩，为设计施釉机器人确定各转轴的电机及其他动力元件提供了可靠的依据。