Acid tolerance of acid-adapted and nonacid-adapted Escherichia coli O157:H7 strains in beef decontamination runoff fluids or on beef tissue

This study assessed the acid tolerance response (ATR) of stationary phase, acid-adapted (tryptic soy broth [TSB]+1% glucose) or nonacid-adapted (glucose-free TSB) Escherichia coli O157:H7 strains (ATCC43889, ATCC43895, ATCC51658 and EO139), grown individually or in a mixed culture, prior to inoculation of beef or meat decontamination runoff (washings) fluids (acidic [pH 4.95] or nonacidic [pH 7.01]). The inoculated beef was left untreated or treated by dipping for 30s in hot water (75 degrees C) followed by 2% lactic acid (55 degrees C). Inoculated beef samples and washings were stored aerobically at 4 or 15 degrees C for 6d, and at set intervals (0, 2, and 6d) were exposed (for 0, 60, 120, and 180min) to pH 3.5 (adjusted with lactic acid) TSB plus 0.6% yeast extract. Overall, there were no significant (P0.05) differences in responses of cultures prepared as individual or mixed strains. Decontamination of meat did not affect the subsequent ATR of E. coli O157:H7 other than resulting in lower initial pathogen levels exposed to acidic conditions. In this study, E. coli O157:H7 appeared to become more tolerant to acid following incubation in acidic washings of sublethal pH (4.89-5.22) compared to nonacidic washings (pH 6.97-7.41) at 4 degrees C or in both types of washings incubated at 15 degrees C. The ATR of the pathogen inoculated into washings was enhanced when cells were previously acid-adapted and incubated at 4 degrees C. Similarly, the ATR on meat was increased by previous acid-adaptation of the inoculum in broth and enhanced by storage at 4 degrees C. Populations on treated meat were consistently lower than those on untreated meat during storage and following exposure to acid. Although on day-0 there were no significant (P0.05) differences in ATR between acid-adapted and nonacid-adapted populations on meat, acid-adapted cells displayed consistently higher resistance through day-6. This suggests that acid-adapted E. coli O157:H7 introduced on meat may become resistant to subsequent lactic acid exposure following storage at 4 degrees C.     

Atrial Fibrillation: Pathogenesis,Predisposing Factors,and Genetics

Atrial fibrillation (AF) is the most frequent arrhythmia managed in clinical practice, and it is linked to an increased risk of death, stroke, and peripheral embolism. The Global Burden of Disease shows that the estimated prevalence of AF is up to 33.5 million patients. So far, successful therapeutic techniques have been implemented, with a high health-care cost burden. As a result, identifying modifiable risk factors for AF and suitable preventive measures may play a significant role in enhancing community health and lowering health-care system expenditures. Several mechanisms, including electrical and structural remodeling of atrial tissue, have been proposed to contribute to the development of AF. This review article discusses the predisposing factors in AF including the different pathogenic mechanisms, sedentary lifestyle, and dietary habits, as well as the potential genetic burden.     

Where Are We with RPE Replacement Therapy? A Translational Review from the Ophthalmologist Perspective

The retinal pigmented epithelium (RPE) plays a pivotal role in retinal homeostasis. It is therefore an interesting target to fill the unmet medical need of different retinal diseases, including age-related macular degeneration and Stargardt disease. RPE replacement therapy may use different cellular sources: induced pluripotent stem cells or embryonic stem cells. Cells can be transferred as suspension on a patch with different surgical approaches. Results are promising although based on very limited samples. In this review, we summarize the current progress of RPE replacement and provide a comparative assessment of different published approaches which may become standard of care in the future.     

Factors Associated with Platelet Activation-Recent Pharmaceutical Approaches

Platelets are at the forefront of human health and disease following the advances in their research presented in past decades. Platelet activation, their most crucial function, although beneficial in the case of vascular injury, may represent the initial step for thrombotic complications characterizing various pathologic states, primarily atherosclerotic cardiovascular diseases. In this review, we initially summarize the structural and functional characteristics of platelets. Next, we focus on the process of platelet activation and its associated factors, indicating the potential molecular mechanisms involving inflammation, endothelial dysfunction, and miRs. Finally, an overview of the available antiplatelet agents is being portrayed, together with agents possessing off-set platelet-inhibitory actions, while an extensive presentation of drugs under investigation is being given.     

Peripheral Inflammatory Markers TNF-α and CCL2 Revisited: Association with Parkinson’s Disease Severity

One of the major mediators of neuroinflammation in PD is tumour necrosis factor alpha (TNF-α), which, similar to other cytokines, is produced by activated microglia and astrocytes. Although TNF-α can be neuroprotective in the brain, long-term neuroinflammation and TNF release can be harmful, having a neurotoxic role that leads to death of oligodendrocytes, astrocytes, and neurons and, therefore, is associated with neurodegeneration. Apart from cytokines, a wide family of molecules with homologous structures, namely chemokines, play a key role in neuro-inflammation by drawing cytotoxic T-lymphocytes and activating microglia. The objective of the current study was to examine the levels of the serum TNF-α and CCL2 (Chemokine (C-C motif) ligand 2), also known as MCP-1 (Monocyte Chemoattractant Protein-1), in PD patients compared with healthy controls. We also investigated the associations between the serum levels of these two inflammatory mediators and a number of clinical symptoms, in particular, disease severity and cognition. Such an assessment may point to their prognostic value and provide some treatment hints. PD patients with advanced stage on the Hoehn–Yahr scale showed an increase in TNF-α levels compared with PD patients with stages 1 and 2 (p = 0.01). Additionally, the UPDRS score was significantly associated with TNF-α levels. CCL2 levels, however, showed no significant associations.     

Distributed model predictive control of switched nonlinear systems with scheduled mode transitions

A method for the design of distributed model predictive control (DMPC) systems for a class of switched nonlinear systems for which the mode transitions take place according to a prescribed switching schedule is presented. Under appropriate stabilizability assumptions on the existence of a set of feedback controllers that can stabilize the closed‐loop switched, nonlinear system, a cooperative DMPC architecture using Lyapunov‐based model predictive control (MPC) in which the distributed controllers carry out their calculations in parallel and communicate in an iterative fashion to compute their control actions is designed. The proposed DMPC design is applied to a nonlinear chemical process network with scheduled mode transitions and its performance and computational efficiency properties in comparison to a centralized MPC architecture are evaluated through simulations. © 2013 American Institute of Chemical Engineers AIChE J, 59:860‐871, 2013     

Modeling and control of protein crystal shape and size in batch crystallization

In this work, the modeling and control of a batch crystallization process used to produce tetragonal hen egg white lysozyme crystals are studied. Two processes are considered, crystal nucleation and growth. Crystal nucleation rates are obtained from previous experiments. The growth of each crystal progresses via kinetic Monte Carlo simulations comprising of adsorption, desorption, and migration on the (110) and (101) faces. The expressions of the rate equations are similar to Durbin and Feher. To control the nucleation and growth of the protein crystals and produce a crystal population with desired shape and size, a model predictive control (MPC) strategy is implemented. Specifically, the steady‐state growth rates for the (110) and (101) faces are computed and their ratio is expressed in terms of the temperature and protein concentration via a nonlinear algebraic equation. The MPC method is shown to successfully regulate both the crystal size and shape distributions to different set‐point values. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2317–2327, 2013     

Effects of Drying and Extraction Methods on the Quality and Antioxidant Activity of Sea Buckthorn (Hippophae rhamnoides) Berries and Leaves

Sea buckthorn is a promising source of bioactive compounds. However, there is limited information on the effect of post harvest drying and extraction of sea buckthorn on its antioxidant capacity. The effect of freeze, air, and solar dryingon the extraction yield of sea buckthorn berries and leaves was evaluated with respect to their bioactive content. Sequential extraction with solvents of different polarity and solvent-free microwave-assisted extraction were applied. Freeze-drying has better performance in the berries’ extracts, while air-drying has better performance in the leaves’ extracts. All data were analyzed by Multi Factor Analysis of Variance (ANOVA) and Duncan's post-hoc tests at a level of α = .05. Although the extraction yield in the sequential extraction of sea buckthorn berries is significantly better, the leaves’ extracts exhibit superior radical scavenging ability. Accelerated solar drying appears to preserve sea buckthorn leaves without degrading their antioxidant content. The components responsible for the high antioxidant activity of leaves’ extracts were found to be several flavonoids and polyphenols. The extract obtained by the microwave extraction of fresh berries exhibits moderate antioxidant activity compared to the polar extracts of freeze-dried berries.     

Modeling and Control of a Titania Aerosol Reactor

We focus on modeling and control of an aerosol flow reactor used to produce titania powder. We initially present a detailed population balance model for the process which accounts for simultaneous nucleation, Brownian and shearinduced coagulation, and convective transport and describe the spatio-temporal evolution of the aerosol volume distribution. Then, under the assumption of lognormal aerosol volume distribution, the method of moments is employed for the derivation of a model that describes the evolution of the three leading moments of the volume distribution. The moment model, together with the fundamental model that describes the temperature in the reactor and concentrations of the gas-phase species, are subsequently used to synthesize a nonlinear output feedback controller which manipulates the temperature of the reactor wall to achieve an aerosol size distribution in the outlet of the reactor with desired geometric average particle diameter. The nonlinear controller is successfully implemented on the process model and is shown to deal effectively with external disturbances.     

Structure–properties investigations in hydrophilic nanocomposites based on polyurethane/poly(2–hydroxyethyl methacrylate) semi‐interpenetrating polymer networks and nanofiller densil for biomedical application

Nanocomposites based on sequential semi–interpenetrating polymer networks (semi–IPNs) of crosslinked polyurethane and linear poly(2‐hydroxyethyl methacrylate) filled with 1–15 wt % of nanofiller densil were prepared and investigated. Nanofiller densil used in an attempt to control the microphase separation of the polymer matrix by polymer–filler interactions. The morphology (SAXS, AFM), mechanical properties (stress–strain), thermal transitions (DSC) and polymer dynamics (DRS, TSDC) of the nanocomposites were investigated. Special attention has been paid to the raising of the hydration properties and the dynamics of water molecules in the nanocomposites in the perspective of biomedical applications. Nanoparticles were found to aggregate partially for higher than 3 and 5 wt % filler loading in semi–IPNs with 17 and 37 wt % PHEMA, respectively. The results show that the good hydration properties of the semi–IPN matrix are preserved in the nanocomposites, which in combination with results of thermal and dielectric techniques revealed also the existence of polymer–polymer and polymer–filler interactions. These interactions results also in the improvement of physical and mechanical properties of the nanocomposites in compare with the neat matrix. The improvement of mechanical properties in combination with hydrophilicity and biocompatibility of nanocomposites are promising for use these materials for biomedical application namely as surgical films for wound treatment and as material for producing the medical devises. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43122.