Increasing the isolated quantities and purities of volatile compounds by using a triple deans-switch multidimensional preparative gas chromatographic system with an apolar-wax-ionic liquid stationary-phase combination

A novel preparative-scale triple gas chromatographic system, equipped with three Deans-switch devices, is herein described. The isolation of volatile compounds was achieved by using a lab-made collection system. Considerations are made on the possibility to inject high volumes of neat sample, maintaining, at the same time, high resolution levels. The degree of recovery of a series of compounds, characterized by a differing volatility, is also reported. In this respect, different collection conditions were evaluated, namely, the presence (or not) of packing material as well as CO(2) cooling, in various combinations. Finally, the interconnected features, that is time requirements and the isolation of "acceptable" analyte quantities (e.g., milligram level for NMR characterization), are related to parameters such as analyte concentration, injected volume, collection conditions, and number of GC runs. The results herein reported will demonstrate the need for a high-resolution GC step, prior to analyte collection, in the prep-GC analysis of complex samples.     

Radiation dose to family members of hyperthyroidism and thyroid cancer patients treated with 131I

The thermoluminescence dosemeter (TLD) was used for measuring radiation dose to family members of thyrotoxicosis and thyroid cancer patients treated with (131)I using CaSO(4):Dy discs. There were 45 family members of thyrotoxicosis patients, who were divided into two groups with 22 in the first and 23 in the second group. Radiation safety instructions were the same for both the groups except in the second group where the patients were advised to use a separate bed at home for the first 3 d of dose administration. An activity ranging from 185 to 500 MBq was administered to these patients. The whole-body dose to family members ranged from 0.4 to 2.4 mSv (mean 1.1 mSv) in the first group and 0-1.9 mSv (mean 0.6 mSv) in the second group. A total of 297 family members of thyroid cancer patients were studied for whole-body dose estimation. An activity ranging from 0.925 to 7.4 GBq was administered to the thyroid cancer patients. The family members were divided into three groups depending upon the mode of transport and facilities available at home to avoid close proximity with the patient. Group A with 25 family members received a dose ranging from 0 to 0.9 mSv (mean 0.4 mSv), group B with 96 family members received a dose ranging from 0 to 8.5 mSv (mean 0.8 mSv) and group C with 176 family members received a dose ranging from 0 to 5.0 mSv (mean 0.8 mSv). The thyroid monitoring was also done in 103 family members who attended the patients in isolation wards for >2 d. Thyroid dose in them ranged from 0 to 2.5 mGy (mean 0.1 mGy).     

Influence of preparation method on structural and magnetic properties of nickel ferrite nanoparticles

Nickel ferrite nanoparticles of very small size were prepared by sol-gel combustion and co-precipitation techniques. At the same annealing temperature sol-gel derived particles had bigger crystallite size. In both methods, crystallite size of the particles increased with annealing temperature. Sol-gel derived nickel ferrite particles were found to be of almost spherical shape and moderate particle size with a narrow size distribution; while co-precipitation derived particles had irregular shape and very small particle size with a wide size distribution. Nickel ferrite particles produced by sol-gel method exhibited more purity. Sol-gel synthesized nanoparticles were found to be of high saturation magnetization and hysteresis. Co-precipitation derived nickel ferrite particles, annealed at 400??C exhibited superparamagnetic nature with small saturation magnetization. Saturation magnetization increased with annealing temperature in both the methods. At the annealing temperature of 600??C, co-precipitation derived particles also became ferrimagnetic.     

Gray wolf optimizer approach to the reliability‐cost optimization of residual heat removal system of a nuclear power plant safety system

To ensure the safety of nuclear power plants (NPPs), nuclear regulatory agencies set technical specifications (TSs). TSs define the safety‐related operational measures and specify essential requirements and set specific limitations that is necessarily be followed by a nuclear industry to meet the requirements for the safety of an NPP. One of the important bases for the setting of TSs is the estimates of the availability and reliability of various systems and costs associated with an NPP. In this work, authors have presented a framework based upon a hodiernal nature‐inspired metaheuristic called multiobjective gray wolf optimizer (MOGWO) algorithm, which mimic the hierarchal and hunting behavior of gray wolves (Canis lupus), for technical specifications optimization of residual heat removal system (RHRS) of an NPP safety system. The efficiency of MOGWO in optimizing the TSs is demonstrated by comparing its results with a very popular swarm‐based optimization technique named multiobjective particle swarm optimization (MOPSO).     

Differential scanning calorimetry and reaction kinetics studies of γ + α2 Ti aluminide

Reaction synthesis method for titanium aluminide processing consists of an exothermic reaction among alloying elements present and primarily between titanium and aluminium particles at specific temperature range. Study of this reaction helps in understanding the process of aluminide formation. Differential scanning calorimetry (DSC) study is the suitable method to study such reactions. In the present work, five different alloy mixtures based on Ti48Al2Cr2Nb0.1B are prepared and DSC study is carried out. Onset temperature, peak temperature and completion temperature of the major exothermic reaction is analyzed at different heating rates. Further, kinetics of the reaction is studied using Johnson–Mehl–Avrami equation. Activation energy and Avrami parameter are calculated and compared with the reported works on binary alloy. It has been observed that exothermic reaction is triggered by melting of aluminium. Boron assists in increasing the enthalpy of reaction by boride formation. Primary reaction product is found to be TiAl₃. Activation energy as well as Avrami parameter is found to have marginal variation due to small change in alloying elements in different alloys and due to heating rates in the same alloy.     

Nanostructured GaN nucleation layer for light-emitting diodes

This paper addresses the formation of nanostructured gallium nitride nucleation (NL) or initial layer (IL), which is necessary to obtain a smooth surface morphology and reduce defects in h-GaN layers for light-emitting diodes and lasers. From detailed X-ray and HR-TEM studies, researchers determined that this layer consists of nanostructured grains with average grain size of 25 nm, which are separated by small-angle grain boundaries (with misorientation approximately 1 degrees), known as subgrain boundaries. Thus NL is considered to be single-crystal layer with mosaicity of about 1 degrees. These nc grains are mostly faulted cubic GaN (c-GaN) and a small fraction of unfaulted c-GaN. This unfaulted Zinc-blende c-GaN, which is considered a nonequilibrium phase, often appears as embedded or occluded within the faulted c-GaN. The NL layer contained in-plane tensile strain, presumably arising from defects due to island coalescence during Volmer-Weber growth. The 10L X-ray scans showed c-GaN fraction to be over 63% and the rest h-GaN. The NL layer grows epitaxially with the (0001) sapphire substrate by domain matching epitaxy, and this epitaxial relationship is remarkably maintained when c-GaN converts into h-GaN during high-temperature growth.     

Electrospun nylon-6 spider-net like nanofiber mat containing TiO2 nanoparticles: A multifunctional nanocomposite textile material

In this study, electrospun nylon-6 spider-net like nanofiber mats containing TiO₂ nanoparticles (TiO₂ NPs) were successfully prepared. The nanofiber mats containing TiO₂ NPs were characterized by SEM, FE-SEM, TEM, XRD, TGA and EDX analyses. The results revealed that fibers in two distinct sizes (nano and subnano scale) were obtained with the addition of a small amount of TiO₂ NPs. In low TiO₂ content nanocomposite mats, these nanofiber weaves were found uniformly loaded with TiO₂ NPs on their wall. The presence of a small amount of TiO₂ NPs in nylon-6 solution was found to improve the hydrophilicity (antifouling effect), mechanical strength, antimicrobial and UV protecting ability of electrospun mats. The resultant nylon-6/TiO₂ antimicrobial spider-net like composite mat with antifouling effect may be a potential candidate for future water filter applications, and its improved mechanical strength and UV blocking ability will also make it a potential candidate for protective clothing.     

Highlight detection and removal from spectral image

We present a constrained spectral unmixing method to remove highlight from a single spectral image. In the constrained spectral unmixing method, the constraints have been imposed so that all the fractions of diffuse and highlight reflection sum up to 1 and are positive. As a result, the spectra of the diffuse image are always positive. The spectral power distribution (SPD) of the light source has been used as the pure highlight spectrum. The pure diffuse spectrum of the measured spectrum has been chosen from the set of diffuse spectra. The pure diffuse spectrum has a minimum angle among the angles calculated between spectra from a set of diffuse spectra and the measured spectrum projected onto the subspace orthogonal to the SPD of the light source. The set of diffuse spectra has been collected by an automated target generation program from the diffuse part in the image. Constrained energy minimization in a finite impulse response linear filter has been used to detect the highlight and diffuse parts in the image. Results by constrained spectral unmixing have been compared with results by the orthogonal subspace projection (OSP) method [Proceedings of International Conference on Pattern Recognition (2006), pp. 812-815] and probabilistic principal component analysis (PPCA) [Proceedings of the 4th WSEAS International Conference on Signal Processing, Robotics and Automation (2005), paper 15]. Constrained spectral unmixing outperforms OSP and PPCA in the visual assessment of the diffuse results. The highlight removal method by constrained spectral unmixing is suitable for spectral images.     

Biofouling reduction of EPDM by radiation-assisted modification for water environment applications

Ethylene propylene diene elastomer (EPDM) harbors diverse microbiota that form biofilms. Such biofilms may contaminate water and can increase drag force impacting the hydrodynamic performance of a ship, once it is used as fenders. Here, the EPDM surface is modified by radiation-assisted grafting to prevent biofilm formation. Three different monomers, namely, methacrylic acid (MAA), isodecyl methacrylate (IDM), and lauryl methacrylate (LMA), are grafted on EPDM. The modified surfaces are characterized by Fourier transform infrared (FTIR) spectroscopy, surface wettability, mechanical and dynamic mechanical properties (DMA), and scanning electron microscopy (SEM). The modified surfaces are subjected to biofouling by prominent biofilm adherents, that is, Pseudomonas aeruginosa and Klebsiella pneumoniae. The standard plate count and resazurin fluorescence assays are performed to observe the microbial load on these surfaces. The MAA-grafted EPDM, which is hydrophilic in nature, shows a considerable decrease in bacterial adhesion compared to pure EPDM, but for IDM and LMA-grafted EPDM, it is the opposite. The deterioration of the surface with bacteria by environmental scanning electron microscopy (ESEM) supports the findings. The tensile property of the modified EPDM is observed to be within satisfactory limits. After such modification, the EPDM is expected to expand its application.