Microstructure and Mechanical Properties of Friction Stir Lap Welded Aluminum Alloy AA2014

Friction stir lap welds were produced in 3 mm thick Alclad sheets of Al alloy 2014-T4 using two different tools (with triangular and threaded taper cylindrical pins). The effects of tool geometry on weld microstructure, lap-shear performance and failure mode were investigated. The pin profile was found to significantly influence the hook geometry, which in turn strongly influenced the joint strength and the failure mode. Welds produced in alloy 2014-T4 Alclad sheets by using triangular and threaded taper cylindrical tools exhibited an average lap-shear failure load of 16.5 and 19.5 kN, respectively, while the average failure load for standard riveted joints was only 3.4 kN. Welds produced in alloy 2014-T6 Alclad sheets and in alloy 2014-T4 bare sheets (i.e., no Alclad) were comparatively evaluated with those produced in alloy 2014-T4 Alclad sheets. While the welds made (with threaded taper cylindrical tool) in T6 and T4 conditions showed very similar lap-shear failure loads, the joint efficiency of the welds made in T6 condition (43%) was considerably lower (because of the higher base material strength) than those made in T4 condition (51%). The Alclad layers were found to present no special problems in friction stir lap welding. Welds made with triangular tool in alloy 2014-T4 Alclad and bare sheets showed very similar lap-shear failure loads. The present work provides some useful insights into the use of friction stir welding for joining Al alloys in lap configuration.     

Pervaporation of chlorinated hydrocarbon-acetone mixtures through poly(ethylene-co-vinyl acetate) membranes

Crosslinked and uncrosslinked ethylene-vinyl acetate copolymer membranes were prepared. The permeation characteristics in the pervaporation process were examined using carbon tetrachloride-acetone mixtures. Modified membranes exhibit carbon tetrachloride permselectivity, but unmodified membranes did not display the permselectivity of crosslinked polymer. Furthermore, membranes modified with dicumyl peroxide (DCP) showed a higher flux and selectivity than those of benzoyl peroxide (BP) modified ones. The effects of feed concentration, molecular size, and polarity of the permeating species on pervaporation were analyzed. The influence of crosslinking density of the membranes on pervaporation was also analyzed. The maximum separation and flux were found to be associated with an optimum amount of crosslinking agent in the membrane. A mixture of chloroform and acetone having a composition near the azeotropic region was also separated by the pervaporation technique. © 1996 John Wiley & Sons, Inc.     

Effect of glass cover inclination and parametric studies of concentrator-assisted solar distillation system

In this communication, a thermal analysis of concentrator-assisted solar distillation unit has been developed to optimize the glass cover inclination. The thermal energy is based on the energy balance equation for each component of the distillation unit by incorporating the proposed modified Dunckle's relation for internal heat loss. An analytical expression for various parameters, namely the water and glass cover temperatures, hourly and daily yield and an instantaneous thermal efficiency, has been derived. Numerical computations have been carried out and it has been observed that the daily output increases with inclination.     

The level of polyaromatic hydrocarbons in kajal and surma of major Indian brands

Kajal and surma are eye cosmetics extensively used in Indian subcontinent. Kajal is prepared by burning of vegetable oil and butter oil while surma by grinding of the stones. High performance liquid chromatography and gas chromatography–mass spectrometry instruments were used for quantification and confirmation of 16 polyaromatic hydrocarbons (PAHs). Significant concentration of PAH was found in all the samples examined. The median concentration of PAH ranged from 0.14 (lowest, anthracene) to 31.18 μg g⁻¹ [dibenz(a,h)anthracene] in kajal sample and from not detectable concentration (naphthalene) to 197.47 μg g⁻¹ of benzo(a)pyrene in surma sample. Fifteen PAHs were detected in all the samples. Therefore the use of kajal and surma in eye should be strictly restricted.     

ATP-regulation of antioxidant properties and phenolics in litchi fruit during browning and pathogen infection process

The impact of energy level on antioxidant properties in relation to pericarp browning and loss of disease resistance of litchi fruit was investigated. Litchi fruits were vacuum-infiltrated with distiled water (control), 1 mM adenosine triphosphate (ATP) and 0.5 mM 2,4-dinitrophenol (DNP) under 75 kPa for 3 min before being inoculated with Peronophythora litchi or not. ATP-treated fruits presented higher activities of antioxidant enzymes, including catalase (CAT), superoxide dismutase (SOD) and ascorbate peroxidase (APX). Higher activities of 1,1-diphenyl-2-picrylhydrazyl (DPPH) scavenging, reducing power and contents of phenolic compounds were also observed in ATP-treated fruit during storage. In contrast, DNP treatment lowered the enzymes activities, scavenging ability and the contents of phenolic compounds. Higher levels of antioxidant enzymatic system and non-enzymatic system were observed in P. litchii-inoculated fruits than those in non-inoculated fruits. Application of ATP and DNP exhibited a similar change patterns and effects in inoculated fruits. When related to previously reported ATP levels, the results suggested that ATP levels could regulate the antioxidant system. Sufficient available energy is crucial for inhibiting browning and preventing the loss of disease resistance in harvested litchi fruit.     

A quantitative analysis of low density polyethylene and linear low density polyethylene blends by differential scanning calorimetery and fourier transform infrared spectroscopy methods

Blends of low density polyethylene (LDPE) and linear low density polyethylene (LLDPE) are widely used for blown film applications. An accurate and rapid test scheme to identify the type and composition of α-olefin in LDPE/LLDPE blends has been developed that utilizes differential scanning calorimetery (DSC) and Fourier transform infrared (FTIR) spectroscopy techniques. The melting point of LDPE varies with density and usually is in the range of 106°C to 112°C for film grade resins. The DSC thermogram of LLDPE is characterized by a broad range of melting peaks with a lower melting peak around 106°C to 110°C and a higher one in the range of 120°C to 124°C. In a blend with LDPE, the ratio of the two endothermic peak heights changes. At a given weight percent of LDPE, this ratio depends on the type of LLDPE (i.e., the comonomer used). Separate calibrations for butene-1, hexene-1, and octene-1 LLDPEs have been developed to quantify the blend composition from DSC thermograms where the α-olefin type is successfully identified by FTIR over the entire blend composition range. The calibration curves are applicable to narrow melt index (MI) and density range conventional film grade LDPE and LLDPE resins and are not intended to be used for the metallocene type LLDPEs.     

Hydrogen-transfer catalytic activity of minerals common to coal

The hydrogenation/dehydrogenation catalytic activity of minerals commonly present in coal was investigated. The extent of reaction undergone by the model hydrogen-transfer system tetralin/1,2-dihydronaphthalene/naphthalene at 400 °C in the presence of these minerals was used to measure the catalytic activity. For the four most active minerals, the order of catalytic activity per gram of mineral, for a given range of particle size, is limonites > pyrites > diaspore > magnetites. The pure chemical analog of the limonites, Fe₂O₃, was found to have catalytic activity similar to that of the limonites. Heating the minerals at 400 °C before running the reaction was found to decrease these catalytic activities, despite the surface-area increases resulting from the annealing process. The catalytic activity per unit area of mineral was determined and used as an index of the catalytic activity of the reactive sites for these heterogeneous systems. The order of decreasing site catalytic activity for the more active minerals is pyrites > magnetites > diaspore > limonites. The observed mineral/ chemical compound catalytic activities indicate that the more reactive mineral hydrogenation/ dehydrogenation catalytic sites are composed of iron compounds.     

Molecular Cross-Talk between Gravity- and Light-Sensing Mechanisms in Euglena gracilis

Euglena gracilis is a photosynthetic flagellate. To acquire a suitable position in its surrounding aquatic environment, it exploits light and gravity primarily as environmental cues. Several physiological studies have indicated a fine-tuned relationship between gravity sensing (gravitaxis) and light sensing in E. gracilis. However, the underlying molecular mechanism is largely unknown. The photoreceptor photoactivated adenylyl cyclase (PAC) has been studied for over a decade. Nevertheless, no direct/indirect interaction partner (upstream/downstream) has been reported for PAC. It has been shown that a specific protein, kinase A (PKA), showed to be involved in phototaxis and gravitaxis. The current study reports the localization of the specific PKA and its relationship with PAC.     

Action-research-based optimisation model for health care behaviour change in rural India

In this research, we utilise a multi-method braided approach for a real-world health care intervention in rural India. We first use action research to conceptually underpin the role of self-help groups, disease profiles and appropriate interventions in health care behaviour change and improvement. Action research is then coupled with a non-linear integer-programming-based simulation to determine how health care resources need to be distributed over time, disease type and groups. The action research provides specific research questions and distributional forms needed for the optimisation analysis, while the non-linear integer-programming simulation provides specific recommendations on where and when to distribute resources. External validity of the study is ensured by the adoption of recommendations in the field as part of the action research. Findings from this research have important policy implications. For example, it identifies the value of continuous embedded interventions as opposed to periodic ones and the importance of flexibility in terms of which community groups and disease types to serve over time. This research also provides an important bridge between the operations research, health care in developing nations, organisational theory and humanitarian operations bodies of knowledge.