Reproducing ten years of road ageing — Accelerated carbonation and leaching of EAF steel slag

Reuse of industrial aggregates is still hindered by concern for their long-term properties. This paper proposes a laboratory method for accelerated ageing of steel slag, to predict environmental and technical properties, starting from fresh slag. Ageing processes in a 10-year old asphalt road with steel slag of electric arc furnace (EAF) type in the subbase were identified by scanning electron microscopy (SEM) and leaching tests. Samples from the road centre and the pavement edge were compared with each other and with samples of fresh slag. It was found that slag from the pavement edge showed traces of carbonation and leaching processes, whereas the road centre material was nearly identical to fresh slag, in spite of an accessible particle structure. Batches of moisturized road centre material exposed to oxygen, nitrogen or carbon dioxide (CO₂) were used for accelerated ageing. Time (7-14 days), temperature (20-40 °C) and initial slag moisture content (8-20%) were varied to achieve the carbonation (decrease in pH) and leaching that was observed in the pavement edge material. After ageing, water was added to assess leaching of metals and macroelements. 12% moisture, CO₂ and seven days at 40 °C gave the lowest pH value. This also reproduced the observed ageing effect for Ca, Cu, Ba, Fe, Mn, Pb, Ca (decreased leaching) and for V, Si, and Al (increased leaching). However, ageing effects on SO₄, DOC and Cr were not reproduced.     

HIx system thermodynamic model for hydrogen production by the Sulfur–Iodine cycle

The HI_x ternary system (H₂O–HI–I₂) is the latent source of hydrogen for the Sulfur–Iodine thermo-chemical cycle. After analysis of the literature data and models, a homogeneous approach with the Peng–Robinson equation of state used for both the vapor and liquid phase fugacity calculations is proposed for the first time to describe the phase equilibrium of this system. The MHV2 mixing rule is used, with UNIQUAC activity coefficient model combined with of hydrogen iodide solvation by water. This approach is theoretically consistent for HI_x separation processes operating above HI critical temperature. Model estimation is done on selected literature vapor–liquid, liquid–liquid, vapor–liquid–liquid and solid–liquid equilibrium data for the ternary system and the three binaries subsystems. Validation is done on the remaining literature data. Results agree well with the published data, but more experimental effort is needed to improve modeling of the HI_x system.     

Bunsen section thermodynamic model for hydrogen production by the sulfur–iodine cycle

A model for the Bunsen section of the Sulfur–Iodine thermo-chemical cycle is proposed, where sulfur dioxide reacts with excess water and iodine to produce two demixing liquid aqueous phases (H₂SO₄ rich and HI rich) in equilibrium. Considering the mild temperature and pressure conditions, the UNIQUAC activity coefficient model combined with Engels' solvation model is used. The complete model is discussed, with HI solvation by water and by iodine as well as H₂SO₄ solvation by water, leading to a very high complexity with almost hundred parameters to be estimated from experimental data. Taking into account the water excess, a successful reduced model with only 15 parameters is proposed after defining new apparent species. Acids total dissociation and total H⁺ solvation by water are the main assumptions. Results show a good agreement with published experimental data between 25 °C and 120 °C.     

Electrostatic Halftoning

We introduce a new global approach for image dithering, stippling, screening and sampling. It is inspired by the physical principles of electrostatics. Repelling forces between equally charged particles create a homogeneous distribution in flat areas, while attracting forces from the image brightness values ensure a high approximation quality. Our model is transparent and uses only two intuitive parameters: One steers the granularity of our halftoning approach, and the other its regularity. We evaluate two versions of our algorithm: A discrete version for dithering that ties points to grid positions, as well as a continuous one which does not have this restriction, and can thus be used for stippling or sampling density functions. Our methods create very few visual artefacts, reveal favourable blue‐noise behaviour in the frequency domain, and have a lower approximation error under Gaussian convolution than state‐of‐the‐art methods.     

Phaseolin diversity as a possible strategy to improve the nutritional value of common beans (Phaseolus vulgaris)

This article proposes a new way to improve the protein quality of the common bean (Phaseolus vulgaris). It is based on the natural variability found in the different types of phaseolin, its main storage protein (40–50% of the total protein). Despite the fact that it is deficient in methionine content, phaseolin still represents the main source of that amino acid in the seed. More than 40 genetic variants, differing in subunit number (2–6) and molecular weight (40–54 kDa) have been analyzed. The similarity of the amino acid composition among phaseolins, suggests that a nutritional improvement cannot be expected from that side. Conversely, important variation in phaseolin susceptibility to proteolysis (ranging from 57% to 96% after cooking) has been observed, increasing the theoretical availability of methionine by up to 37%. Therefore, breeding programs based on highly-digestible phaseolin types could lead to the production of beans with higher protein quality.     

Forecast of mycotoxins levels in soft wheat, durum wheat and maize before harvesting with Qualim��tre?

Some mycotoxins are produced by several Fusarium species during cultivation and are found in wheat and maize grain. Since 2000, Syngenta has organised a large field survey. Agronomic and climatic data and grain samples have been collected for mycotoxin analysis in France and Belgium. The importance of the agroclimatic factors and their interactions on the mycotoxin levels in grain has been estimated. The climate around flowering stage is the major factor for deoxynivalenol (DON) in wheat. The main agronomic criteria are residue management and the variety sensitivity to this mycotoxin. For DON, zearalenone and fumonisins in maize, the climate from flowering stage until harvest is the major factor. Then, according to each mycotoxin, the main agronomic criteria are the harvest condition (date and grain moisture), the corn borer infestation and the variety sensitivity to these mycotoxins. Over the years, the database has been used to define models to predict the mycotoxin risk before harvesting. Grain purchasers enter the required agronomic data via the Syngenta Internet site and define their grain purchasing areas. They also define the flowering period for wheat and corn borer infestation for maize. After calculation which integrates climatic data, the purchasers receive reports with forecasts of mycotoxin levels. Prediction is based on different agro-climatic statistical models specifically configured according to the different regions of production in France and Belgium. This approach is called Qualimètre^? and was the first service in France and Belgium to forecast the grain mycotoxin level for wheat in 2004 and maize in 2006.     

Markov random fields for catadioptric image processing

Images obtained with catadioptric sensors contain significant deformations which prevent the direct use of classical image treatments. Thus, Markov random fields (MRF) whose usefulness is now obvious for projective image processing, cannot be used directly on catadioptric images because of the inadequacy of the neighborhood. In this paper, we propose to define a new neighborhood for MRF by using the equivalence theorem developed for central catadioptric sensors. We show the importance of this adaptation for segmentation, image restoration and motion detection.