Zeroth-order complex-amplitude modulation with dielectric Fourier-type dififractive elements

Abstract

Diffraction by a lamellar grating with slowly modulated groove width and depth is considered. By mathematical design of the diffractive microstructure the zeroth diffraction order of the carrier grating may be modulated in amplitude and phase and thereby split into some specified on-axis far-zone diffraction pattern. The noise, which in diffractive optics normally appears in the immediate neighbourhood of the signal, is shifted angularly into the surroundings of the higher diffraction orders of the carrier grating. Therefore a large frame of virtually zero intensity can be formed around the original signal without brute force optimization. This is of interest in, for example, several space-invariant optical interconnection and photonic switching schemes that employ diffractive beam-splitter elements.     

Electromagnetic field computation in semiconductor laser resonators

An electromagnetic method based on rigorous diffraction theory of gratings is applied to the analysis of fields in semiconductor laser cavities. The method is based on the Fourier modal method; it is fully rigorous for infinitely periodic resonators and highly accurate for single resonators when absorbing boundary conditions are applied. Fundamental-mode intracavity and near-field distributions are evaluated for some selected geometries, and resonance frequencies are predicted.     

Concentrations and leachability of chemical elements in estuarine sulfur-rich sediments, W. Finland

Concentrations, distributions and mobility of chemical elements were investigated in reduced sulfur-rich estuarine sediments located in western Finland. The main objective was to determine the possible extent of metal leaching when dredged masses of these sulfur-rich sediments are dumped on the land and thus exposed to air. When dredged, the reduced sulfur in the sediments oxidises resulting in a lowering of pH, which in turn is expected to leach metals. The study area is an artificial lake claimed from the Botnian sea in 1962. In this lake, several mass-kills of fish have occurred, believed partly to be due to dredging. Two sediment samples (0-50 and 50-100 cm) were taken from 39 sampling points in the lake. These samples were leached in aqua regia (2:2:2 HNO3/HCl/H2O1) and analysed for Fe, Al, Mg, Ca, K, P, Na, Mn, Zn, Ba, V, Sr, Cr, Ni, Cu, Co, As, Pb, B, Mo and Cd with ICP-AES. Sulfur and organic carbon were analysed with Leco. In a controlled laboratory experiment, the sediments were allowed to oxidise for 1 year while moisturised with deionised water every month. The pH and conductivity were determined in the beginning of the experiment (reduced state) and in the end (oxidised state). In the supernatants in the oxidised states the amount of leached metals (Na, Al, Mn, Zn, Sr, Co, Ni, Cu, Cd, Cr, Pb, U, Li, Rb and As) were determined with ICP-MS. The sediments were found to contain low levels of toxic metals but, as expected, high concentrations of sulfur. In the experiment, pH was lowered (down to 3.0) and the conductivity increased in all samples due to oxidation and release of metal ions. The extent of leaching varied between 0.03% for As and 12.3% for Na. Critical pH values, at which high amounts of metals begin to leach, were obtained graphically. These values varied between 4.8 (Ni) and 3.3 (Cr). Not all elements were controlled by pH, e.g. Mn correlated well with its aqua regia leachable concentration. In a planned dredging operation in the area some 23,300 t (10,500 m3) (dry wt.) of sediments will be dredged. The amounts of metals likely to be leached, according to the results from this study, are as follows (kg): Al (1710), Mn (1230), Zn (59), Sr (39), Co (13), Ni (12), Cu (2) and less than 1 kg of Cd-Cr-As-Pb.     

Tacticity distribution of isotactic polypropylene prepared with heterogeneous Ziegler-Natta catalyst. 2. Application and analysis of SSA data for polypropylene

Accurate characterisation of the tacticity distribution in isotactic polypropylene is important for obtaining better structure property correlations and for the indirect investigation of the active sites in heterogeneous Ziegler-Natta catalysts. In this work, successive self-nucleation and annealing (SSA) DSC measurement is applied for the study of tacticity distribution in polypropylene fractions with varying isotacticity. The results are compared with ¹³C NMR and temperature rising elution fractionation (TREF). Analysis of the lamellar thicknesses and average meso sequence lengths (MSL) revealed that the fractions could be classified into three main groups according to the lamellar structure generated in SSA. The fractions with relatively low isotacticity crystallise mainly by the longest crystallisable sequence of the chain. In more isotactic fractions, the lamellar thicknesses are close to the average crystallisable sequence lengths of the chains. For the highest isotacticity fractions correlation was not found. Because of these differences the correlation between the melting temperature and isotacticity (meso diad-%) was non-linear. Good correspondence between the SSA melting curves and the TREF fractograms was observed.     

A Schema for Flexile Equipment Control in Manufacturing Systems

In this work a methodology is proposed for increasing the flexibility of the control software of Flexible Manufacturing Systems (FMSs). This greater flexibility is required due to factors such as uncertain product demand, uneven distribution of shop load, and machine or cutting tool unavailability. In the proposed framework the following modules were developed: (a) an automated process planning module which generates non-linear process plans for a given part, considering the shop floor resource availability; the non-linear plans include both material handling and material processing information; (b) a planning module that linearises the process plan aiming at minimising the total manufacturing time of the parts; (c) a NC program generation module, which generates the NC program for the chosen CNC machine(s). In order to increase the flexibility of the control software even more, a resource model was devised and implemented, which provides the necessary resource information for the above modules. Each of these modules is described within this paper, and details about the part and process plan representation necessary for this implementation are also given. A case study is presented in order to show the capability of the methodology.     

Dynamic simulation of product process

During 90’s Nokia utilized Concurrent Engineering (CE) process in mobile phone business successfully. Strong growing of the company, more complex technologies, maturing markets and changes in competition has increased the need to develop the product process of the company to keep its position as an agile, innovative and productive product developer. Dynamic simulation approach has been one of the activities among other product process re-engineering efforts in the company.This paper describes the approach and “Product Process Decision Simulation” (PPDS) solution as the first implemented application of the approach. A dynamic model of product development has been created and applied to manage product process complex dynamic behavior on system level in order to reduce product development cycle times, slippages and costs as well as improve perceived product quality. The key contribution of the simulation solution is to provoke facilitated discussion in order to gain shared understanding of interdependencies and dynamic causes and effects in product process.The implementation and frequent simulation workshops have started in June 2006 and about 500 R&D people have already participated.     

Fabrication and characterization of vacuum deposited fluorescein thin films

Simple vacuum evaporation technique for deposition of dyes on various solid surfaces has been developed. The method is compatible with conventional solvent-free nanofabrication processing enabling fabrication of nanoscale optoelectronic devices. Thin films of fluorescein were deposited on glass, fluorine-tin-oxide (FTO) coated glass with and without atomically layer deposited (ALD) nanocrystalline 20 nm thick anatase TiO₂ coating. Surface topology, absorption and emission spectra of the films depend on their thickness and the material of supporting substrate. On a smooth glass surface the dye initially forms islands before merging into a uniform layer after 5 to 10 monolayers. On FTO covered glass the absorption spectra are similar to fluorescein solution in ethanol. Absorption spectra on ALD-TiO₂ is red shifted compared to the film deposited on bare FTO. The corresponding emission spectra at λ = 458 nm excitation show various thickness and substrate dependent features, while the emission of films deposited on TiO₂ is quenched due to the effective electron transfer to the semiconductor conduction band.     

Effect of Boron on the Strength and Toughness of Direct-Quenched Low-Carbon Niobium Bearing Ultra-High-Strength Martensitic Steel

The effect of boron on the microstructures and mechanical properties of laboratory-control-rolled and direct-quenched 6-mm-thick steels containing 0.08 wt pct C and 0.02 wt pct Nb were studied. The boron contents were 24 ppm and a residual amount of 4 ppm. Two different finish rolling temperatures (FRTs) of 1093 K and 1193 K (820 °C and 920 °C) were used in the hot rolling trials to obtain different levels of pancaked austenite prior to DQ. Continuous cooling transformation (CCT) diagrams were constructed to reveal the effect of boron on the transformation behavior of these steels. Microstructural characterization was carried out using various microscopy techniques, such as light optical microscopy (LOM) and scanning electron microscopy-electron backscatter diffraction (SEM-EBSD). The resultant microstructures after hot rolling were mixtures of autotempered martensite and lower bainite (LB), having yield strengths in the range 918 to 1067 MPa with total elongations to fracture higher than 10 pct. The lower FRT of 1093 K (820 °C) produced better combinations of strength and toughness as a consequence of a higher degree of pancaking in the austenite. Removal of boron lowered the 34 J/cm² Charpy-V impact toughness transition temperature from 206 K to 158 K (?67 °C to ?115 °C) when the finishing rolling temperature of 1093 K (820 °C) was used without any loss in the strength values compared to the boron-bearing steel. This was due to the finer and more uniform grain structure in the boron-free steel. Contrary to expectations, the difference was not caused by the formation of borocarbide precipitates, as verified by transmission electron microscopy (TEM) investigations, but through the grain coarsening effect of boron.     

Ubimedia based on readable and writable memory tags

Ubimedia is a concept where media files are embedded in everyday objects and the environment. We propose an approach where the user can read and write these files with his/her personal mobile phone simply by touching the physical objects. This facilitates easy access and storage of, e.g. video and audio files related to the physical object in question. This paper describes our work in developing a technical solution for ubimedia and studying user acceptance of forthcoming ubimedia services. Our technical development of the ubimedia concept has been focused on a mobile phone platform with a tag reader/writer, memory tags with large storage capacity, and the communication between the phone and the tags. Currently, the technical design is in test and evaluation phase. The preliminary results show that the concept works and it can be implemented technically. In parallel with the technical development, we have studied usage possibilities for ubimedia and user acceptance of future ubimedia services. User acceptance has been studied in a web survey and in user evaluations of proofs-of-concept. In addition, an ethical assessment has been carried out. The users appreciated especially the simplicity, speed, low cost and reliability of ubimedia. Ethical concerns were related to control over the download with regard to viruses and other unwanted content.