Yodel: A Yield Stress Model for Suspensions

A model for the yield stress of particulate suspensions is presented that incorporates microstructural parameters taking into account volume fraction of solids, particle size, particle size distribution, maximum packing, percolation threshold, and interparticle forces. The model relates the interparticle forces between particles of dissimilar size and the statistical distribution of particle pairs expected for measured or log-normal size distributions. The model is tested on published data of sub-micron ceramic suspensions and represents the measured data very well, over a wide range of volume fractions of solids. The model shows the variation of the yield stress of particulate suspensions to be inversely proportional to the particle diameter. Not all the parameters in the model could be directly evaluated; thus, two were used as adjustable variables: the maximum packing fraction and the minimum interparticle separation distance. The values for these two adjustable variables provided by the model are in good agreement with separate determinations of these parameters. This indicates that the model and the approximations used in its derivation capture the main parameters that influence the yield stress of particulate suspensions and should help us to better predict changes in the rheological properties of complex suspensions. The model predicts the variation of the yield stress of particulate suspensions to be inversely proportional to the particle diameter, but the experimental results do not show a clear dependence on diameter. This result is consistent with previous evaluations, which have shown significant variations in this dependence, and the reasons behind the yield stress dependence on particle size are discussed in the context of the radius of curvature of particles at contact.     

Plasticity of feature-based selection in triple-conjunction search.

Two experiments examined the disruption of feature-based selection in triple-conjunction search at multiple target transfers. In Experiment 1, after 10 training sessions, a new target possessing previous distractor features was introduced. This produced disruption in RT and fixation number, but no disruption in feature-based selection. Specifically, there was a tendency to fixate objects sharing the target's contrast polarity and shape and this did not change even upon transfer to the new target. In Experiment 2, 30 training sessions were provided with three target transfers. At the first transfer, the results replicated Experiment 1. Subsequent transfers did not produce disruption on any measure. These findings are discussed in terms of strength theory, Guided Search, rule-based approaches to perceptual learning, and the area activation model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A connectionist implementation of the theory of planned behavior: Association of beliefs with exercise intention.

The theory of planned behavior suggests attitudes are a product of salient beliefs. This study examined whether aggregating salient beliefs was plausible within a more biologically centered information-processing environment. A neural network was used to examine associations among beliefs relating to exercise intention. Data on intentions and behavioral, normative, and control beliefs from 114 respondents were used to train (by error backpropagation) a neural network to associate beliefs with intention. The R2 between the network's estimated and self-reported intention was .66. The network's representation comprised 6 belief profiles associated with high, moderate, or low behavioral intention. The neural network accommodated complex relationships among beliefs and belief-intention associations and indicated how high-level constructs such as attitudes may be viewed as the best fit (compromise state) between aroused beliefs. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Dynamical modeling and experimental validation of a micro-speaker with corrugated diaphragm for mobile phones

As the design trend of modern cellular phones evolves to be miniaturization and versatile sound in quality, the electro-mechanical components including the micro-speaker are essential toward size reduction and broad frequency range of sound. To reduce size, a diaphragm type micro-speaker is commonly employed in industry, while to broaden the sound frequency range corrugations on the diaphragm are adopted. The corrugations are generally capable of leading to fairly flat response over a broad range since diaphragm stiffness is decreased in axial direction. To confirm the aforementioned capability, the modeling on a corrugated diaphragm is performed first using finite element method (FEM) to obtain the associated dynamic equations in terms of modal coordinates; then the equations are next combined with the magneto-electrical model of the voice coil motor (VCM) that is attached to the bottom side of the diaphragm. Finally, the acoustic effects of the air inertia on the diaphragm and vents of the outer case are modeled using basic acoustic theories. Assembling all derived system equations and solving them, the frequency response of the micro-speaker in sound pressure level (SPL) can be simulated. It shows that the diaphragm corrugation in fact helps flatten the SPL response of the micro-speaker (especially in high frequency range) to lessen sound distortion. Furthermore, the corrugation angle approximately below 45° is favored over other angles or flatter SPL response. Experiments are also conducted to verify the theoretical findings.     

Shear mode coupling and tilted grain growth of A1N thin films in BAW resonators.

Polycrystalline A1N thin films were deposited by RF reactive magnetron sputtering on Pt(111)/Ti electrode films. The substrates were tilted by an angle ranging from 40 degrees to 70 degrees with respect to the target normal. A low deposition temperature and a high sputter gas pressure were found ideal for tilted growth. The resulting grain tilt angle amounts to about half the substrate tilt angle. For coupling evaluation, 5 GHz solidly mounted resonator structures have been realized. The tilted grain A1N films exhibited a permittivity in the 9.5-10.5 range and loss tangent of 0.3%. Two shear modes as well as the longitudinal mode could be clearly identified. The coupling coefficient k2(eff) of the fundamental thickness shear mode (TS0) was found to be about 0.5%, which is compatible with a c-axis tilt of about 6 degrees.     

Hydrogenated amorphous semiconductors

Solar cells based on hydrogenated amorphous silicon are now made from a variety of materials including alloys and microcrystalline films. Research aimed at improving cell efficiency should emphasize studies of alloys and metastable defects. We discuss several research topics related to the growth, structure, and electronic properties of these materials, which should lead to improved photovoltaic devices.     

Auditory stream segregation by musical timbre: Effects of static and dynamic acoustic attributes.

Two experiments examined the influence of timbre on auditory stream segregation. In Experiment 1, listeners heard sequences of orchestral tones equated for pitch and loudness, and they rated how strongly the instruments segregated. Multidimensional scaling analyses of these ratings revealed that segregation was based on the static and dynamic acoustic attributes that influenced similarity judgments in a previous experiment (P. Iverson & C. L. Krumhansl, 1993). In Experiment 2, listeners heard interleaved melodies and tried to recognize the melodies played by a target timbre. The results extended the findings of Experiment 1 to tones varying in pitch. Auditory stream segregation appears to be influenced by gross differences in static spectra and by dynamic attributes, including attack duration and spectral flux. These findings support a Gestalt explanation of stream segregation and provide evidence against a peripheral channel model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Evaluation of Soybean Seedcoat Cracking During Drying:PART II. Using MRI

MRI techniques were developed and employed for non-destructive and noninvasive study of seedcoat cracking in low moisture soybean kernels during heated air drying. Proton density image and transient moisture distribution profile of a single soybean kernel can be obtained using MRI. These MRI techniques proved to be particularly useful for the continuous observation of initiation and propagation of seedcoat cracking during the entire period of drying process without interruption.

The proton density images of soybean kernels showed that seedcoat cracking was initiated perpendicular to the long axis of the kernel near the hilum. The transient moisture distribution profiles in soybean kernels during drying indicate that moisture gradient developed during drying was higher in the seedcoat than in the cotyledon. Drying temperature and initial average moisture content were positively correlated with the soyhean seedcoat crackig. The location of the     

Dimensions of perfectionism, daily stress, and depression: A test of the specific vulnerability hypothesis.

Tested whether perfectionism dimensions interact with specific stressors to predict depression. A depressed patient sample (N?=?51) and a general psychiatric sample (N?=?94) completed measures of perfectionism, hassles, and depression. Ss in Sample 2 also completed other personality measures to assess the amount of unique variance in depression. Partial support was obtained: In both samples, self-oriented perfectionism interacted only with achievement stressors to predict depression. Socially prescribed perfectionism interacted with interpersonal stress in Sample 1 and with achievement stress in Sample 2 to predict depression. Several personality variables, including socially prescribed perfectionism, accounted for unique variance in depression. The results suggest that perfectionism dimensions are associated with depression and may constitute specific vulnerability factors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)