Spatial distribution and habitat characterization of schistosomiasis host snails in lake and land habitats of western Kenya

Intermediate host snails of schistosomiasis were surveyed in this study to determine their abundance and distribution in the lake and land aquatic habitats of Lake Victoria basin of Kenya. Several sites were sampled at eight locations, both in the lake and on the land. The habitat and/or vegetation type (i.e. open water, hippo grass, hyacinth, ambatch trees, other vegetation, stream, swamp, pond, dam) of the sampled aquatic sites within the locations were also differentiated, water physicochemical parameters were determined, and the abundance of different species or taxa of phytoplankton and zooplankton were enumerated and correlated with the abundance of schistosomiasis snails in the sites. The results indicated significantly more Biomphalaria sudanica snails than Bulinus africanus snails in different physical habitats on land (Student's t‐test, P < 0.05), as well as in different locations on land (Student's t‐test, P = 0.026). Regression analyses revealed that several physicochemical parameters, including dissolved oxygen (R² = ?0.659; n = 8; P = 0.014), pH (R² = 0.728; n = 8; P = 0.007) and turbulence (R² = ?0.616; n = 8; P = 0.02), were predictive of Biomphalaria spp. abundance, while pH (R² = 0.610; n = 8; P = 0.02) and turbulence (R² = ?0.578; n = 8; P = 0.028) were predictive of Bulinus spp. abundance in different locations in the lake. Cyanobacteria (R² = 0.638; n = 8; P = 0.02) and chlorophyceae (R² = ?0.50; n = 8; P = 0.05) were shown to be predictive of both Biomphalaria spp. and Bulinus spp. abundance in different locations in the lake. Zooplankton abundance varied significantly between different locations in the lake (One‐way anova , P < 0.001). Bosmina spp. were found to be predictive of both Biomphalaria spp. (R² = ?0.627; n = 8; P = 0.01) and Bulinus spp. (R² = ?0.50; n = 8; P = 0.05) in different locations in the lake. The results from this study will help inform policy regarding control measures for schistosomias and intermediate snail hosts in Lake Victoria waters, as well as in adjacent terrestrial aquatic habitats and even beyond.     

An Investigation into Lubrication and Oxide Breakdown During Load-Carrying Capacity Testing

Changes occurring in the friction and wear mechanisms during a load-carrying capacity test, lubricated with cetane containing a carboxylic acid, were investigated. The changes in wear scar/track appearance and oxide coverage/composition were analyzed during every load stage.

The main conclusions were as follows:

• The breakdown in the protective oxide layer formed on the opposing steel surfaces was found to be the prerequisite for initiation of seizure.

• The seizure load achieved during load-carrying capacity testing quantifies the ability of the test fluid to prevent transition to the adhesive wear regime.

• The most severe surface damage was found to occur during the first few seconds after test initiation. Desorption of the adsorbed lubricant film and the subsequent removal of the naturally occurring thin oxide layer results in the initial period of adhesive wear.

• Partial recovery to a state of acceptable friction occurs after the period of initial seizure. During this period, the surface coverage by the adsorption lubricant molecules and the oxide coverage are sufficient to prevent severe adhesive wear from occurring. Wear is primarily a combination of oxidative, abrasive, and fatigue wear (all possible in the regions of mixed friction and boundary lubrication).

• Final lubricant breakdown and eventual seizure are initiated when the oxide removal rate exceeds the oxide formation rate resulting in severe adhesive wear followed by seizure.

     

Postglacial lake shoreline surveys and lacustrine paleobiotic records in northern Bruce and Grey counties,Ontario, Canada

Northern Grey and Bruce counties are situated centrally in the Lake Huron basin of the Great Lakes area of North America and are similarly central to the area of glacial Lake Algonquin, the largest glacial lake of the Great Lakes area. Ten survey traverses at sites in northern Grey and Bruce counties have documented the continuation of Lake Algonquin and Nipissing phase shorelines onto the Bruce Peninsula from previous work to the east. The Algonquin shoreline near 240 m ASL (above sea level) rises northward above land high enough to record it near Lion's Head. The Nipissing shoreline at 191 m ASL defines a shallow strait across the Bruce Peninsula near Ferndale, which was flooded temporarily at the maximum of the Nipissing transgression, separating northern Bruce Peninsula from the mainland. Uplift and Port Huron outlet downcutting later rejoined the island to the mainland as it is today. Raised beaches define Algonquin and Nipissing regressions by uplift using the Port Huron outlet. Paleobiotic records in a sand dune at Oliphant (molluscs), a Nipissing shorebluff along Sucker Creek (molluscs) and several sites in the former Nipissing shallow water strait near Ferndale (molluscs, ostracodes, plant macrofossils), provide paleoenvironmental data and supplement prior pollen studies at Lake Charles, Slough of Despond, and Hope Bay. Lake Algonquin deep water rhythmite clays are barren of fossils, whereas Nipissing shallow water silts are fossiliferous.     

Model-based Regional Assessment of Water Use An Example for Semi-arid Northeastern Brazil

Abstract

Water use assessments are a necessary prerequisite for sustainable water resources management and planning in river basins, federal states, or countries. For reasons of transparency, flexibility, ease of update, and the possibility to generate scenarios of future water use, such assessments are best carried out by applying a water use model. To support water resources planning in two federal states of semi-arid Northeastern Brazil, Ceará and Piauí, the regional-scale water use model NoWUM was developed. It computes withdrawal and consumptive water use for each of 332 municipalities, distinguishing five water use sectors: irrigation, livestock, households, industry, and tourism. The model is suited to simulate the impact of global change and of management measures on water demand. Using NoWUM, the present-day water use situation in Ceará and Piauí is assessed. In addition, the impact of inter-annual climate variability and long-term climate change on irrigation requirements is considered. Scarce and uncertain input data lead to a high level of uncertainty in the model results. It is likely that water use in the most important sector, irrigation, is underestimated, while industrial water use is possibly overestimated. With some modifications, NoWUM has the potential to be applied for water use assessments in other data-poor regions of the globe.     

Assessment of Water Quality Management in Turkey

Abstract

There has been a noticeable increase in the amount of pollution in water resources in Turkey in recent years. Negative environmental developments, such as industrialization, increasing urbanization, improper pesticide and fertilizer applications in agricultural lands, and the drainage of domestic and industrial wastewater into water resources without any waste treatment applications, cause rapid pollution of both surface and groundwater resources. Therefore, it is necessary to allocate more attention to water resources monitoring and evaluation studies to prevent the pollution of water resources, and to reclaim these resources.     

The use of NDVI and its Derivatives for Monitoring Lake Victoria’s Water Level and Drought Conditions

Normalized Difference Vegetation Index (NDVI), which is a measure of vegetation vigour, and lake water levels respond variably to precipitation and its deficiency. For a given lake catchment, NDVI may have the ability to depict localized natural variability in water levels in response to weather patterns. This information may be used to decipher natural from unnatural variations of a given lake’s surface. This study evaluates the potential of using NDVI and its associated derivatives (VCI (vegetation condition index), SVI (standardised vegetation index), AINDVI (annually integrated NDVI), green vegetation function (F _g ), and NDVIA (NDVI anomaly)) to depict Lake Victoria’s water levels. Thirty years of monthly mean water levels and a portion of the Global Inventory Modelling and Mapping Studies (GIMMS) AVHRR (Advanced Very High Resolution Radiometer) NDVI datasets were used. Their aggregate data structures and temporal co-variabilities were analysed using GIS/spatial analysis tools. Locally, NDVI was found to be more sensitive to drought (i.e., responded more strongly to reduced precipitation) than to water levels. It showed a good ability to depict water levels one-month in advance, especially in moderate to low precipitation years. SVI and SWL (standardized water levels) used in association with AINDVI and AMWLA (annual mean water levels anomaly) readily identified high precipitation years, which are also when NDVI has a low ability to depict water levels. NDVI also appears to be able to highlight unnatural variations in water levels. We propose an iterative approach for the better use of NDVI, which may be useful in developing an early warning mechanisms for the management of lake Victoria and other Lakes with similar characteristics.     

Methods and instrumentation for piezoelectric motors

Because of their compact form factor and rigidity, piezoelectric motors are used in scanning probe microscopes that operate at low temperature and high magnetic field. Here we present detailed information to facilitate the assembly, operation, and characterization of inertial motors. Specifically, a model of the motor is developed and used to identify different regions of operation. Drive electronics with high slew rate and large output current are described and a step-by-step procedure for assembling piezoelectric shear stacks is detailed. Additionally, a novel reflective object sensor is described and used to characterize a Pan-style inertial motor that was designed and assembled using the concepts presented in this paper.     

Segmentation of virus particle candidates in transmission electron microscopy images

In this paper, we present an automatic segmentation method that detects virus particles of various shapes in transmission electron microscopy images. The method is based on a statistical analysis of local neighbourhoods of all the pixels in the image followed by an object width discrimination and finally, for elongated objects, a border refinement step. It requires only one input parameter, the approximate width of the virus particles searched for. The proposed method is evaluated on a large number of viruses. It successfully segments viruses regardless of shape, from polyhedral to highly pleomorphic.     

A new device for performing reference point indentation without a reference probe

Here we describe a novel, hand-held reference point indentation (RPI), instrument that is designed for clinical measurements of bone material properties in living patients. This instrument differs from previous RPI instruments in that it requires neither a reference probe nor removal of the periosteum that covers the bone, thus significantly simplifying its use in patient testing. After describing the instrument, we discuss five guidelines for optimal and reproducible results. These are: (1) the angle between the normal to the surface and the axis of the instrument should be less than 10°, (2) the compression of the main spring to trigger the device must be performed slowly (>1 s), (3) the probe tip should be sharper than 10 μm; however, a normalized parameter with a calibration phantom can correct for dull tips up to a 100 μm radius, (4) the ambient room temperature should be between 4?°C and 37 °C, and (5) the effective mass of the bone or material under test must exceed 1 kg, or if under 1 kg, the specimen should be securely anchored in a fixation device with sufficient mass (which is not a requirement of previous RPI instruments). Our experience is that a person can be trained with these guidelines in about 5 min and thereafter obtain accurate and reproducible results. The portability, ease of use, and minimal training make this instrument suitable to measure bone material properties in a clinical setting.     

Improving metastable impact electron spectroscopy and ultraviolet photoelectron spectroscopy signals by means of a modified time-of-flight separation

The separation of ultraviolet photoelectron spectroscopy (UPS) and metastable impact electron spectroscopy (MIES) is usually performed by a time-of-flight (ToF) separation using pre-set ToF for both types of signal. In this work, we present a new, improved ex situ signal separation method for the separation of MIES and UPS for every single measurement. Signal separation issues due to changes of system parameters can be overcome by changing the ToF separation and therefore allowing for the application of a wider range of measuring conditions. The method also enables to identify and achieve separation of the two signals without any time consuming calibration and the use of any special material for the calibration. Furthermore, changes made to the discharge source are described that enable to operate an existing MIES/UPS source over a broader range of conditions. This allows for tuning of the yield of UV photons and metastable rare gas atoms leading to an improved signal to noise ratio. First results of this improved setup are well in agreement with spectra reported in literature and show increased resolution and higher signal intensities for both MIE and UP spectra compared to the previous, non-optimized setup.