Experimental design to evaluate properties of electrospun fibers of zein/poly (ethylene oxide) for biomaterial applications

The production of polymer fibers from the combination of zein and PEO might have great potential in the field of biomaterial. Zein/PEO fibers were obtained in this work through solution electrospinning. An experimental design, 2^4-1, was used for evaluating the influences of PEO content in the blend, distance from the needle tip to the collector, applied electric voltage and solution flow for average fiber diameter and relative-yield process. Beyond this, the relationship between PEO content in the blend and the fiber properties were evaluated through FTIR, DSC, TG, tensile tests, and cytotoxic tests. The factor that exerts the greatest effect on the average fiber diameter response was the electrical voltage. The increase in PEO content in the blend decreased the thermal stability and increased the degree of the fibers' crystallinity. The mechanical tests showed that fibers with higher elongation were obtained at richer PEO blends. The fibers presented cytocompatible characteristics.     

Bi-layer gelatin active films with “Pitanga” leaf hydroethanolic extract and/or natamycin in the second layer

Research on biopolymers-based active films produced with natural antioxidants and/or antimicrobials has gained attention over the last few years; however, anti-mold activity has been less studied than those of anti-bacteria. The aim of this work was the development and characterization of bi-layer films based on gelatin with natamycin and/or “Pitanga” leaf hydroethanolic extract in the second thin layer in order to determine the effects of these bioactive compounds on bi-layered film properties. The films were characterized regarding their moisture content and solubility in water, optical properties, microstructure, mechanical and thermal properties, water contact angle, water vapor permeability, UV/visible light transmission, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and antioxidant and anti-mold activities. Active films presented activity against Penicillium spp and Aspergillus niger and demonstrated antioxidant activity, as measured by ABTS ^•+ and DPPH ^• methods. Neither additive used in the films' second layer significantly affected the films' moisture content, thermal properties or the molecular interactions of the polymer matrix, assessed by FTIR, although some mechanical properties were affected, and the water contact angle. In conclusion, bi-layer films have reduced the quantity of additives required to maintain the antioxidant and anti-mold activities, as compared to similar monolayer films of the same thickness.     

Tetranorsesquiterpenoids as Attractants of Yucca Moths to Yucca Flowers

Journal of Chemical Ecology - The obligate pollination mutualism between Yucca and yucca moths is a classical example of coevolution. Oviposition and active pollination by female yucca moths occur...     

Analysis of surface integrity for minimum quantity lubricant—MQL in grinding

The quality of machined components is currently of high interest, for the market demands mechanical components of increasingly high performance, not only from the standpoint of functionality but also from that of safety. Components produced through operations involving the removal of material display surface irregularities resulting not only from the action of the tool itself, but also from other factors that contribute to their superficial texture. This texture can exert a decisive influence on the application and performance of the machined component. This article analyzes the behavior of the minimum quantity lubricant (MQL) technique and compares it with the conventional cooling method. To this end, an optimized fluid application method was devised using a specially designed nozzle, by the authors, through which a minimum amount of oil is sprayed in a compressed air flow, thus meeting environmental requirements. This paper, therefore, explores and discusses the concept of the MQL in the grinding process. The performance of the MQL technique in the grinding process was evaluated based on an analysis of the surface integrity (roughness, residual stress, microstructure and microhardness). The results presented here are expected to lead to technological and ecological gains in the grinding process using MQL.     

A two‐step control approach for docking of autonomous underwater vehicles

This paper presents a novel integrated guidance and control strategy for docking of autonomous underwater vehicles. The approach to the base, and hence the control design, is divided in two steps: (i) in the first, at higher speed, the vehicle dynamics is assumed to be underactuated, and an appropriate control law is derived to steer the vehicle towards the final docking path, achieving convergence to zero of the appropriate error variables for almost all initial conditions; (ii) in the second stage, at low speed, the vehicle is assumed to be fully actuated, and a robust control law is designed that achieves convergence to zero of the appropriate error variables for all initial conditions, in the presence of parametric model uncertainty. Simulations are presented illustrating the performance of the proposed controllers, including model uncertainty and sensor noise. Copyright © 2014 John Wiley & Sons, Ltd.     

Signage Versus Environmental Affordances: Is the Explicit Information Strong Enough to Guide Human Behavior During a Wayfinding Task?

This study aims to explore how people behave when they have to find a location within a complex building and are confronted with situations where directional signage (i.e., explicit information) is in opposition to environmental affordances that naturally direct users towards a specific path, creating a situation with conflicting information (e.g., a brighter corridor vs. a darker corridor but with a directional sign indicating to follow the darker one). A virtual reality–based methodology was used and a between‐subject design was considered. Thus, participants were given the tasks of finding three publicly accessible central points in a virtual hotel and confronted with a two forced‐choice task of local scenes in which environmental variables (i.e., corridor width and brightness) and signage varied systematically, in two experimental conditions (i.e., neutral and signage). For the signage condition, signs were inserted to explicitly point in the opposite direction than that implicitly suggested by the environmental affordances, creating situations with conflicting information. Results indicate that environmental variables were able to direct people indoors acting as environmental affordances. Users preferred to follow the wider and brighter paths. However, when directional signage pointed in the opposite direction of the paths preferred by the participants, most of them complied with signage.     

A high-shear, low Reynolds number microfluidic rheometer

We present a microfluidic rheometer that uses in situ pressure sensors to measure the viscosity of liquids at low Reynolds number. Viscosity is measured in a long, straight channel using a PDMS-based microfluidic device that consists of a channel layer and a sensing membrane integrated with an array of piezoresistive pressure sensors via plasma surface treatment. The micro-pressure sensor is fabricated using conductive particles/PDMS composites. The sensing membrane maps pressure differences at various locations within the channel in order to measure the fluid shear stress in situ at a prescribed shear rate to estimate the fluid viscosity. We find that the device is capable to measure the viscosity of both Newtonian and non-Newtonian fluids for shear rates up to 10⁴ s^?1 while keeping the Reynolds number well below 1.     

Modeling on triangulations with geodesic curves

This paper discusses the problem of modeling on triangulated surfaces with geodesic curves. In the first part of the paper we define a new class of curves, called geodesic Bézier curves, that are suitable for modeling on manifold triangulations. As a natural generalization of Bézier curves, the new curves are as smooth as possible. In the second part we discuss the construction of C ⁰ and C ¹ piecewise Bézier splines. We also describe how to perform editing operations, such as trimming, using these curves. Special care is taken to achieve interactive rates for modeling tasks. The third part is devoted to the definition and study of convex sets on triangulated surfaces. We derive the convex hull property of geodesic Bézier curves.

Line patterning of graphite and the fabrication of cheap, inexpensive, “throw-away” sensors

A new simple method (“line patterning technique”) using only standard office equipment is described whereby clearly defined, electrically conducting patterns of graphite can be deposited on polymer (plastic) or paper substrates. The properties of the conductive patterns have been characterized by electrical conductivity and SEM measurements. Sensors were constructed by using interdigitated patterns of graphite deposited on plastic and paper, and coated with a thin film of conducting electronic polymer, e.g. polyaniline emeraldine salt.     

Influence of green creativity on organizations: A case study from the perspectives of leaders and subordinates

The sustainability framework has a strong influence on the policies, practices and procedures of companies. Green creativity plays a pivotal role in the development of initiatives and innovations for the environmental pillar of sustainability. Based on a survey applied to a Portuguese company with an accredited environmental management system (N = 146), the findings reveal that green creativity is influenced in different ways when analysed from distinct perspectives. The leader's green creativity is positively influenced by the subordinate's green self-efficacy and personal identification with the leader, whereas the subordinate's green creativity is positively influenced by their green passion and green self-efficacy, and the leaders' green creativity. This study shows that green creativity develops differentially according to distinct job positions and expectations that in practice must be complementary and synergistic for its effective development.