Image segmentation towards new image representation methods

Very low bit-rate video coding has recently become one of the most important areas of image communication and a large variety of applications have already been identified. Since conventional approaches are reaching a saturation point, in terms of coding efficiency, a new generation of video coding techniques, aiming at a deeper “understanding” of the image, is being studied. In this context, image analysis, particularly the identification of objects or regions in images (segmentation), is a very important step. This paper describes a segmentation algorithm based on split and merge. Images are first simplified using mathematical morphology operators, which eliminate perceptually less relevant details. The simplified image is then split according to a quad tree structure and the resulting regions are finally merged in three steps: merge, elimination of small regions and control of the number of regions.     

Microplastic and other anthropogenic microparticles in water and sediments of Lake Simcoe

Microplastics (plastic particles <5 mm in size) have been reported in ecosystems worldwide and have been shown to cause adverse negative impacts on organisms. This study provides the first report of microplastics and other anthropogenic microparticles in the surface waters and sediments of Lake Simcoe in Ontario, Canada, a popular recreational and fishing lake. Surface waters (low volume grabs and manta trawls) and sediments were sampled from eight sites to determine microparticle abundances and character (size, morphology, material identity). Concentrations ranged from 0 to 0.7 particles/L in surface water grab samples, 0.4–1.3 particles/m³ in manta trawl samples, and 8.3–1070 particles/kg in sediment samples. Spectroscopic analysis confirmed that 72% of particles were anthropogenic, with 64% unambiguously identified as microplastics. However, confirmed microplastic concentrations were approximately 6–7 times lower than unadjusted counts in sediments, demonstrating the importance of verifying and adjusting reported values. Fibers were only quantified and characterized in surface water grab samples and sediments, and were the most common morphology, accounting for 82% and 89% of anthropogenic particles, respectively. Fragments were most common in manta trawl samples (75%, excluding fibers) and consisted predominantly of polyethylene (41%) and polypropylene (22%). The influence of proximity to urban centers and prevailing winds on the distribution of microplastics was apparent in surface water manta trawls. Microplastics and other anthropogenic microparticles are present in Lake Simcoe but at lower abundances than at locations impacted by larger population centers in other large freshwater lakes such as Lakes Ontario and Erie of the Great Lakes.     

Analysis of information exchange activities to actualize and validate situation awareness during shift changeovers in nuclear power plants

Shift work situations occur in almost all safety‐critical organizations, and the investigations of some catastrophes like Chernobyl, Exxon Valdez, and the Gol/Legacy mid‐air collision indicated that shift work information exchange played an important role during the evolution of the situation before the accidents. Inadequate communications during shift changeovers challenged operators' work in the moments that preceded these accidents, because they got inadequate information about the current situation. Our research focuses on the information exchange activities (verbal, written, and nonverbal) of nuclear power plant control operators during shift changeovers. Our aim is to investigate how verbal exchanges and other representations enable operator crews to share information regarding the events that occurred in the previous shift to achieve adequate situation awareness. Our findings indicated the importance and richness of the information exchange during the shift changeover process to update and validate individual and collective situation awareness, showing that information adequately shared enables the ad hoc configurations of regulation loops and a safer use of simplified strategies that can be understood and be validated by other operators, reducing the occurrence of cognitive overloads and contributing to the construction of a common cognitive ground that enhances system resilience. © 2010 Wiley Periodicals, Inc.     

A fuzzy queue-aware routing approach for wireless mesh networks

Recent advances in Wireless Mesh Networks (WMNs) have overcome the drawbacks of traditional wired and ad-hoc networks and now they are seen as a means of allowing last mile communications with quality level assurance in Future Multimedia Systems. However, new routing schemes are needed to provide end-to-end Quality of Service (QoS) and Quality of Experience (QoE) support for delay/loss/jitter-sensitive multimedia applications. The well-known OLSR (Optimized Link State Routing) protocol with ETX (Expected Transmission Count) metric brings many benefits to the path selection process, but has a drawback with regard to queue availability management, which reduces the system performance. This problem is caused when OLSR-EXT control messages are exchanged and the queues of mesh routers along the end-to-end communication path are overloaded. As a result, multimedia-related packets will suffer from loss/delay/jitter and the overall system performance will decrease. This paper proposes the Optimized Link State Routing-Fuzzy ETX Queue (OLSR-FEQ) protocol to overcome the limitations of OLSR-ETX regarding queue availability, QoS and QoE assurance. OLSR-FEQ optimizes network and user-based parameters by coordinating queue availability, QoS and fuzzy issues in the routing decision process as a way of allocating the best paths for multimedia applications. Performance evaluations were carried out with the Network Simulator (NS-2.34) to show the benefits of the proposed solution when compared with existing routing schemes, namely OLSR-ETX, OLSR-FLC, OLSR-MD and HWMP (IEEE 802.11s standard), regarding QoS (unsuccessful packet delivery and throughput) and QoE (PSNR, SSIM, VQM and MOS) parameters.     

Modeling of the condyle elements within a biomechanical knee model

The development of a computational multibody knee model able to capture some of the fundamental properties of the human knee articulation is presented. This desideratum is reached by including the kinetics of the real knee articulation. The research question is whether an accurate modeling of the condyle contact in the knee will lead to reproduction of the complex combination of flexion/extension, abduction/adduction, and tibial rotation observed in the real knee. The model is composed by two anatomic segments, the tibia and the femur, whose characteristics are functions of the geometric and anatomic properties of the real bones. The biomechanical model characterization is developed under the framework of multibody systems methodologies using Cartesian coordinates. The type of approach used in the proposed knee model is the joint surface contact conditions between ellipsoids, representing the two femoral condyles, and points, representing the tibial plateau and the menisci. These elements are closely fitted to the actual knee geometry. This task is undertaken by considering a parameter optimization process to replicate experimental data published in the literature, namely that by Lafortune and his coworkers in 1992. Then kinematic data in the form of flexion/extension patterns are imposed on the model corresponding to the stance phase of the human gait. From the results obtained, by performing several computational simulations, it can be observed that the knee model approximates the average secondary motion patterns observed in the literature. Because the literature reports considerable inter-individual differences in the secondary motion patterns, the knee model presented here is also used to check whether it is possible to reproduce the observed differences with reasonable variations of bone shape parameters. This task is accomplished by a parameter study, in which the main variables that define the geometry of condyles are taken into account. It was observed that the data reveal a difference in secondary kinematics of the knee in flexion versus extension. The likely explanation for this fact is the elastic component of the secondary motions created by the combination of joint forces and soft tissue deformations. The proposed knee model is, therefore, used to investigate whether this observed behavior can be explained by reasonable elastic deformations of the points representing the menisci in the model.     

PhotoGeo: a photo digital library with spatial-temporal support and self-annotation

The recent popularity of digital cameras has posed a new problem: how to efficiently store and retrieve the very large number of digital photos captured and chaotically stored in multiple locations without any annotation. This paper proposes an infrastructure, called PhotoGeo, which aims at helping users with the people photo annotation, event photo annotation, storage and retrieval of personal digital photos. To achieve the desired objective, PhotoGeo uses new algorithms that make it possible to annotate photos with the key metadata to facilitate their retrieval, such as: the people who were shown in the photo (who); where it was captured (where); the date and time of capture (when); and the event that was captured. The paper concludes with a detailed evaluation of these algorithms.     

Evaluating the influence of multiplexing schemes and buffer implementation on perceived VoIP conversation quality

This work presents a study of RTP multiplexing schemes, which are compared with the normal use of RTP, in terms of experienced quality. Bandwidth saving, latency and packet loss for different options are studied, and some tests of Voice over IP (VoIP) traffic are carried out in order to compare the quality obtained using different implementations of the router buffer. Voice quality is calculated using ITU R-factor, which is a widely accepted quality estimator. The tests show the bandwidth savings of multiplexing, and also the importance of packet size for certain buffers, as latency and packet loss may be affected. The customer’s experience improvement is measured, showing that the use of multiplexing can be interesting in some scenarios, like an enterprise with different offices connected via the Internet. The system is also tested using different numbers of samples per packet, and the distribution of the flows into different tunnels is found to be an important factor in order to achieve an optimal perceived quality for each kind of buffer. Grouping all the flows into a single tunnel will not always be the best solution, as the increase of the number of flows does not improve bandwidth efficiency indefinitely. If the buffer penalizes big packets, it will be better to group the flows into a number of tunnels. The router processing capacity has to be taken into account too, as the limit of packets per second it can manage must not be exceeded. The obtained results show that multiplexing is a good way to improve customer’s experience of VoIP in scenarios where many RTP flows share the same path.     

Controlled teleportation via photonic Faraday rotations in low-Q cavities

This paper presents feasible experimental schemes to realize controlled teleportation protocols via photonic Faraday rotations in low-Q cavities. The schemes deal with controlled teleportation of superposition states and two-particle entanglement of atomic states. The information is encoded in lambda configured three-level atoms trapped inside coupled cavities by optical fibers. Also, we estimate the success probability and the current feasibility of the schemes.     

Chronically Elevated Exogenous Glucose Elicits Antipodal Effects on the Proteome Signature of Differentiating Human iPSC-Derived Pancreatic Progenitors

The past decade revealed that cell identity changes, such as dedifferentiation or transdifferentiation, accompany the insulin-producing β-cell decay in most diabetes conditions. Mapping and controlling the mechanisms governing these processes is, thus, extremely valuable for managing the disease progression. Extracellular glucose is known to influence cell identity by impacting the redox balance. Here, we use global proteomics and pathway analysis to map the response of differentiating human pancreatic progenitors to chronically increased in vitro glucose levels. We show that exogenous high glucose levels impact different protein subsets in a concentration-dependent manner. In contrast, regardless of concentration, glucose elicits an antipodal effect on the proteome landscape, inducing both beneficial and detrimental changes in regard to achieving the desired islet cell fingerprint. Furthermore, we identified that only a subgroup of these effects and pathways are regulated by changes in redox balance. Our study highlights a complex effect of exogenous glucose on differentiating pancreas progenitors characterized by a distinct proteome signature.