Extensional rheology of raw natural rubber from new clones of Hevea brasiliensis

Natural rubber (NR) is a biopolymer whose properties depend on the molecular structure of the 1,4‐cis polyisoprene chains, nonrubber constituents, environmental conditions, etc. NR has been characterized by Mooney viscosity, Wallace plasticity, nitrogen content (%N). However, these cannot effectively account for clone's differences. The aim of this work is to use extensional rheology to characterize and differentiate NR samples as for clone type and the season of the year in comparison to the traditional characterizations. Three IAC 300 series and RRIM 600 clones of Hevea brasiliensis tapped between October 2006 (Oct_06) and August 2008 (Aug_08) were investigated. IAC 329 clones showed the least susceptibility to seasonal changes, whereas RRIM 600 was the most influenced. An opposite trend between extensional viscosity (η_E) and %N was established. The former was very sensitive to changes in the molecular structure of NR, being fundamental for monitoring purposes and strategic development of new rubber tree clones. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Modeling the reliability of a group membership protocol for dual-scheduled time division multiple access networks

We present reliability models for a group membership protocol designed for TDMA networks such as FlexRay, a protocol that is likely to become the de facto standard for next generation automotive networks. The models are based on discrete-time Markov chains and consider a comprehensive set of fault scenarios. Furthermore, they are parametric allowing for a sensitivity analysis. The results, obtained by a numeric solution of the models using the PRISM model-checker, show that they are computationally practical for realistic configurations and that the GMP can achieve reliability levels in the range required for safety critical applications.     

Carbonation durability of blended cement pastes used for waste encapsulation

Blended cement pastes are currently used for encapsulation of low level and intermediate level nuclear waste in the UK. However, there is still little information on the long-term durability of those mixes to some chemical attacks. Accelerated testing may predict the long-term durability or at least help the selection of more durable formulations. In this work, blended blastfurnace slag (BFS)/Portland cement (OPC) pastes containing 60, 75 and 90% BFS and pulverised fuel ash (PFA)/OPC pastes with 40, 55 and 75% PFA were cured at 20 and 60°C for 90 days then submitted to natural and accelerated carbonation (5% CO₂). The effects of the curing temperature as well as the OPC replacement level on the carbonation ratio are presented. Results showed a good correlation between natural and accelerated carbonation for the pastes studied. Carbonation was found to be governed by the amount of calcium hydroxide available in the mixes before the process started.     

Development of semitransparent wood‐polymer composites

A new material has been developed consisting of pieces of wood embedded within a matrix of acrylic polymer, resulting in a transparent or semitransparent wood‐based product. This material presents quite appealing aesthetic features, thereby opening new possibilities for decorative applications. Because acrylic and methacrylic monomers are in the liquid state at room temperature, it is possible to introduce wood (in the current case, walnut wood) into a mixture of acrylic (hydroxypropyl acrylate) and/or methacrylic monomers (methyl methacrylate and 2‐hydroxyethyl methacrylate) along with a plasticizer (dioctyl phthalate) in the presence of a chemical initiator (benzoyl peroxide). A transparent polymeric matrix with dispersed wood is then obtained through bulk free‐radical polymerization. Introducing this reaction mixture along with pieces of wood into a mold results in a wood‐polymer composite. A 2^4?1 experimental fractional factorial design was implemented to study the importance of the composition of these materials on several relevant properties. The sheets produced were characterized by tensile testing, dynamic mechanical thermal analysis, thermal gravimetric analysis, and heat deflection temperature. The models obtained for predicting each property pointed to valuable insights regarding the influential constituents. In particular, our results suggested that monomers to be used in future applications of this material should be selected in terms of their cost and the desired flexibility for the final product, not in terms of their polarity. J. VINYL ADDIT. TECHNOL., 2012. © 2012 Society of Plastics Engineers     

Assisted history matching in the presence of frequent well intervention using generalize travel time inversion

In this paper we propose an efficient and novel technique that handles production discontinuities through a resampling of the production data, eliminating high frequency production details in a transformed domain. The technique also reduces non-monotonic behavior and results in a response more suitable for the GTTI based misfit calculations. Our proposed approach has been applied to an offshore turbidite reservoir with extensive well intervention resulting in highly detailed production responses. The static model contains more than three-hundred-thousand cells, complex sand depositional distribution combined with fault structures, four pairs of injector-producers, deviated producing wells and more than 8 years of production history. Previous history matching attempts using traditional approaches had difficulties matching production response at the individual well level. With our proposed modifications to the GTTI approach, a significant improvement was obtained on the well level match quality. Most importantly, by visualizing the streamlines and the dynamic adjustment of flow paths during history matching, we could easily identify the areas of inconsistency between the geologic model and the production data. The calibrated geologic model and streamline trajectories provided important insight about communication within sand channels, differences in flow paths and barriers that have not been included in the previous geologic and seismic interpretation.     

STL-free design and manufacturing paradigm for high-precision powder bed fusion

High-precision powder bed fusion (PBF), together with highly complex geometries necessitate a much more scalable representation of the geometry and an efficient computational pipeline. This paper presents a new digital design and manufacturing paradigm to solve the scalability and efficiency challenges by using the concept of STL-free workflow. It seamlessly integrates implicit solid modelling for design and direct slicing for manufacturing without any intermediate steps related to STL meshes. The presented paradigm has been validated by two case studies involving complex geometries filled with multiscale triply periodic minimal surfaces (TPMS), which are fabricated by PBF with laser beam size 25 µm.     

FAME Production and Fatty Acid Profiles from Moist Chlorella sp. and Nannochloropsis oculata Biomass

In the present study, we investigated the production of fatty acid methyl esters (FAME) from moist Chlorella sp. and Nannochloropsis oculata biomass using a hydrolysis–esterification process. Additionally, we evaluated for the first time the fatty acid profile before and after this process. Hydrolysis of the lipid fraction was performed on a moist biomass in the presence of differing amounts of an acid catalyst in both 50 and 100 % w/w water relative to the biomass. The esterification of the crude extracts of the free fatty acids (FFA) was then investigated. The experiments show that in the presence of 50 % w/w water relative to the biomass, the hydrolysis–esterification process results in higher FFA and FAME yields. The analysis of the fatty ester profiles did not reveal any degradation of the FFA from the microalgae biomass under the hydrolysis–esterification conditions. The results were compared with both extraction–transesterification and direct transesterification processes using dry biomass. The extraction–transesterification and hydrolysis–esterification processes resulted in similar FAME yields and similar profiles of the fatty esters from dry and moist biomass materials, respectively.     

Soft X‐ray Ptychographic Imaging and Morphological Quantification of Calcium Silicate Hydrates (C–S–H)

Morphological details of calcium silicate hydrate (C–S–H) stemming from the hydration process of Portland cement (PC) phases are crucial for understanding the PC‐based systems but are still only partially known. Here we introduce the first soft X‐ray ptychographic imaging of tricalcium silicate (C₃S) hydration products. The results are compared using both scanning transmission X‐ray and electron transmission microscopy data. The evidence shows that ptychography is a powerful method to visualize the details of outer and inner product C–S–H of fully hydrated C₃S, which have fibrillar and an interglobular structure with average void sizes of 20 nm, respectively. The high‐resolution ptychrography image enables us to perform morphological quantification of C–S–H, and, for the first time, to possibly distinguish the contributions of inner and outer product C–S–H to the small angle scattering of cement paste. The results indicate that the outer product C–S–H is mainly responsible for the q^?3 regime, whereas the inner product C–S–H transitions to a q^?2 regime. Various hypotheses are discussed to explain these regimes.     

Changes in Coupled Vibration Frequencies and Modes of Wall-Cavity Systems Induced by Stiffness Variation in the Structure

Problems of fluid structure interactions are governed by a set of fundamental parameters. This work aims at showing through simple examples the changes in natural vibration frequencies and mode shapes for wall-cavity systems when the structural rigidity is modified. Numerical results are constructed using ANSYS software with triangular finite elements for both the fluid （2D acoustic elements） and the solid （plane stress） domains. These former results are compared to proposed analytical expressions, showing an alternative benchmark tool for the analyst. Very rigid wall structures imply in frequencies and mode shapes almost identical to those achieved for an acoustic cavity with Neumann boundary condition at the interface. In this case, the wall behaves as rigid and fluid-structure system mode shapes are similar to those achieved for the uncoupled reservoir case.     

Stresses Analysis on a Rail Part

The EFVM （Vitoria Minas Railroad） is one of the main railways in Brazil. It transports freight trains of ore, 220 wagons each. These wagons have 2 boogies of 2 axles each and 32 metric tons on metre gauge. Elastic strains were measured on a special part of this railway due to these trains. The main load to evaluate stresses and strains was a G 16 Locomotive, a C-C kind from Vale, a Brazilian Company. The measurements were obtained by dynamic deflectometer installed on a main line of this railway, near Ipatinga, a city from Minas Gerais, one of Brazil states. This track was equipped to obtain stresses under an equal repeated static load A simulation of the stresses was made under critical strain by Ferrovia 1.0 software. It was also made an evaluation of unequal results from neighbor sleepers taking in comparison two equipped parts of this railway, one with compacted ballast and no compaction to the other. The results were strain limited, avoiding breakage or damage to the studied rails. This work analyses these measurements focusing on the improvement of track quality.