FAME Production and Fatty Acid Profiles from Moist Chlorella sp. and Nannochloropsis oculata Biomass

In the present study, we investigated the production of fatty acid methyl esters (FAME) from moist Chlorella sp. and Nannochloropsis oculata biomass using a hydrolysis–esterification process. Additionally, we evaluated for the first time the fatty acid profile before and after this process. Hydrolysis of the lipid fraction was performed on a moist biomass in the presence of differing amounts of an acid catalyst in both 50 and 100 % w/w water relative to the biomass. The esterification of the crude extracts of the free fatty acids (FFA) was then investigated. The experiments show that in the presence of 50 % w/w water relative to the biomass, the hydrolysis–esterification process results in higher FFA and FAME yields. The analysis of the fatty ester profiles did not reveal any degradation of the FFA from the microalgae biomass under the hydrolysis–esterification conditions. The results were compared with both extraction–transesterification and direct transesterification processes using dry biomass. The extraction–transesterification and hydrolysis–esterification processes resulted in similar FAME yields and similar profiles of the fatty esters from dry and moist biomass materials, respectively.     

Organo-zincate molten salts as immobilising agents for organometallic catalysis

The combination of 1-n-butyl-3-methylimidazolium chloride with ZnCl₂ affords ionic mixtures with different melting point temperatures depending on the zinc molar fraction. RuCl₂(PPh₃)₃ immobilised in the low melting mixture (60°C) promotes the 1-hexene hydrogenation (turnover frequencies up to 44 min^–1) and the recovered solid catalyst phase can be reused several times.     

Poly(lactic acid)/poly(vinyl pyrrolidone) membranes produced by solution blow spinning: Structure,thermal, spectroscopic,and microbial barrier properties

Submicrometric and nanometric poly(lactic acid)/poly(vinyl pyrrolidone) (PLA/PVP) fibrous membranes containing 0, 5, 10, 15, and 20 wt % PVP, with or without 20 wt % Copaiba oil (Copaifera sp.), were produced by solution blow spinning (SBS), using polymer injection rate of 120 μL min^?1, gas pressure of 2.4 kPa, working distance of 20 cm, and collector rotation of 200 rpm. The morphological, thermal, and spectroscopic properties of these membranes were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetry (TG), and Fourier transform infrared spectroscopy (FTIR). A method for the evaluation of membrane microbial barrier properties based on resazurin colorimetric method was proposed. Results showed that the addition of both PVP and Copaiba oil produced thicker fibers; otherwise, there was no effect on morphology. Thermal analyses (TG and DSC) indicated the immiscible nature of polymer blends produced, also confirmed by the spectroscopic studies. Antimicrobial barrier properties were related to the antimicrobial effect of Copaiba oil, combined with it hydrophobic nature. The hydrophilic nature of PVP favored degradation of fiber mats, impairing barrier property when higher concentrations of PVP were added. Results indicate that produced spun mats can potentially be used in applications such as wound dressing. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44802.     

Production,nutrient cycling and soil compaction to grazing of grass companion cropping with corn and soybean

Agricultural management systems are needed to simultaneously enhance production, promote plant diversity, improve nutrient cycling and reduce soil compaction. We investigated the effects of intercropped forage grass on production of corn (Zea mays L.) harvested for silage at 0.20 and 0.45 m height in the summer, as well as on production of subsequent forage, soybean [Glycine max (L.) Merr.] harvested for silage, nutrient cycling and soil responses on a Typic Haplorthox in Botucatu, São Paulo State, Brazil. Palisade grass cv. BRS Piatã [Urochloa brizantha cv. BRS Piatã] was the introduced companion crop with corn (Years 1 and 2), while signal grass [Urochloa decumbens cv. Basilisk] was the residual weedy species in comparison. Guineagrass cv. Aruãna [Megathyrsus maximus cv. Aruãna] was the introduced companion crop with soybean (Year 3), with only a residual effect of crop systems from the previous two years. After the corn silage harvest, pasture was grazed by lambs in winter/spring using a semi-feedlot system. When cut at 0.45 m compared with 0.20 m height, corn intercropped with palisade grass had greater leaf nutrient concentration, improved agronomic characteristics, forage mass of pasture for grazing by lambs, greater surface mulch produced, and greater quantity of N, P and K returned to soil. Greater soil organic matter, P, K and Mg concentration, and base saturation in the surface soil depth and lower soil penetration resistance at all depths occurred at 0.45 m than at 0.20 m corn silage cutting height intercropped with palisade grass. Analyzing the system as a whole, harvesting corn silage crop with palisade grass intercrop at 0.45 m height was the most viable option in this integrated crop-livestock system.     

Recursive adjustment,unit root tests and structural breaks

In this paper, we introduce unit root tests for time series with a potential structural break computed from test regressions in which the deterministic components have been recursively adjusted. We present finite sample critical values as well as Monte Carlo results on the size and power performance of the new procedures, and compare these with other available tests in the literature, such as OLS and quasi‐differenced based tests (see, for instance, Perron, (1997) Perron and Rodriguez, (2003) and Carrion‐i‐Silvestre et al. (2009) ). The small sample behaviour of the tests is evaluated in a known and an unknown break date context allowing for negligible and non‐negligible initial conditions. In the unknown break date case, two break date estimation procedures are considered, one based on the minimum unit root t‐statistic and the other based on the minimum sum of squared residuals obtained from a regression on a set of deterministic variables. The size and power performance of the recursive adjustment based procedure in the unknown break date case is encouraging. A further result of this paper relates to the aditional finite sample evidence on the performance of quasi‐differenced unit root tests, complementing the results in Perron and Rodriguez (2003) .     

Evaluation of Compacted Cementitious Composites for Porous Bearings

The use of porous materials as a restrictor in aerostatic bearings provides many advantages over conventional restrictors, such as small variation of temperature, high damping, high operational speeds, limited wear, and capacity to support radial, axial, and combined loading. A design of experiment (DOE) was carried out to evaluate cold‐pressed cementitious composites as an air restrictor in thrust bearings. The physical and mechanical properties such as the apparent porosity, permeability, and elastic modulus were investigated in this work, thus verifying the structural and flow characteristics of the composites for such application. The composites fabricated with low compacting pressure and small silica particles provided the material requirements for porous bearings.     

Cover Image,Volume 141, Issue 17

The cover image by Lizandra Viana Maurat da Rocha highlights one of our innovative biodegradable films, which incorporated molybdenum trioxide and zinc oxide into the poly(butylene adipate-co-terephthalate) matrix through casting. The photo emphasizes its partial transparency and homogeneity. Some analytical results reported as FTIR, TD-NMR, XRD and TGA validates nanomaterial's exceptional mechanical and chemical properties. Icons below underscore its potential as an eco-friendly food packaging,with bacteriostatic features and no formation of microplastics after disposal. DOI: 10.1002/app.55294

     

Volatile Organic Compounds of Conspecific-Damaged Eucalyptus benthamii Influence Responses of Mated Females of Thaumastocoris peregrinus

Plants respond to herbivory by synthesizing and releasing novel blends of volatile organic compounds (VOCs). Natural enemies are attracted to these VOCs, but little is known about the effects of these chemicals on the herbivores themselves. We studied the effect of Thaumastocoris peregrinus herbivory on VOCs released by Eucalyptus benthamii plants and the responses of this herbivore to the VOCs. In total, 12 compounds released by E. benthamii were identified. Five compounds (β-pinene, linalool, 9-epi-(E)-caryophyllene, viridiflorol, and one unidentified compound) emitted after herbivore and mechanical damage were not detected in collections from undamaged plants. The three most abundant VOCs, α-pinene, aromadendrene, and globulol, were released in greater quantities from herbivore-damaged plants compared to plants with mechanical damage, which, in turn, released greater amounts than undamaged (control) plants. The VOCs emitted after herbivore damage did not differ during the photophase and scotophase in either quantity or quality. In an olfactometer, mated female T. peregrinus showed a preference for undamaged plants over herbivore-damaged plants, and also for hexane over α-pinene at an amount equivalent to that released by a herbivore-damaged plant. In the olfactometer, virgin females did not exhibit any preference between conspecific-damaged or undamaged plants.     

Biosynthesis and Site of Production of Sex Pheromone Components of the Cerambycid Beetle, Hedypathes betulinus

We determined the site of pheromone production tissues and a partial route for the biosynthesis of the sex pheromone in Hedypathes betulinus (Coleoptera: Cerambycidae: Lamiinae), Brazil’s main green maté pest. Pheromone was found predominantly in the prothorax of males, suggesting that this is the region of production of pheromones in this insect. Scanning electron microscopy revealed small pores that may be associated with pheromone release in males; these pores also were observed in females. A deuterium-labeled putative precursor (geranyl acetone-D₅) of the sex pheromone of H. betulinus was synthesized. When applied to the prothorax of males, label from the precursor was incorporated into the pheromone components, confirming that pheromone production occurs in the prothorax and that the pheromone components are biosynthesized from geranyl acetone.