Galvani's frog: Harbinger of a new era

On 30 October 1786 Luigi Galvani gave the first account, at the Academy of Sciences of Bologna, about his experiments on animal electricity, of which he thought to have obtained evidence from the convulsions shown by a dissected frog, as soon as its hind-limbs were connected with the spinal cord by means of a metallic conductor. The publication of these experiments gave rise to Galvani's controversy with Volta, who denied the existence of animal electricity after discovering that there exists a potential difference between any couple of dissimilar conductors. This was a preliminary step that led Volta to the invention of the voltaic pile. Evidence of animal electricity was given about 1840 by Carlo Matteucci, using the astatic galvanometer invented by Leopoldo Nobili. This fundamental property of living organisms is now a well-advanced field of investigation by electrophysiology and bioelectrochemistry.     

Application of a leakage model to assess exfiltration from sewers.

The exfiltration of wastewater from sewer systems in urban areas causes a deterioration of soil and possibly groundwater quality. Beside the simulation of transport and degradation processes in the unsaturated zone and in the aquifer the analysis of the potential impact requires the estimation of quantity and temporal variation of wastewater exfiltration. Exfiltration can be assessed by the application of a leakage model. The hydrological approach was originally developed to simulate the interactions between the groundwater and surface water, it was adapted to allow for modelling of interactions between groundwater and sewer system. In order to approximate the exfiltration specific model parameters infiltration specific parameters were used as a basis. Scenario analysis of the exfiltration in the City of Dresden from 1997 to 1999 and during the flood event in August 2002 shows the variation and the extent of exfiltration rates.     

An asymptotically efficient ARMA estimator based on sample covariances

An asymptotically efficient autoregressive moving-average (ARMA) spectral estimator is presented, based on the sample covariances of observed time series. The estimate of the autoregressive (AR) part is shown to be identical to the optimal instrumental variable (IV) estimator in [7] although derived here using a different approach. The moving-average (MA) spectral parameter estimate is new.     

Analysis and synthesis of on-chip spiral inductors

This paper presents a physically based compact model for estimating high-frequency performance of spiral inductors. The model accurately accounts for skin and proximity effects in the metal conductors as well as eddy current losses in the substrate. The model shows excellent agreement with measured data mostly within 10% across a variety of inductor geometries and substrate dopings up to 20 GHz. A web-based spiral inductor synthesis and analysis tool COILS, which makes use of the compact models, is presented. An optimization algorithm using binary searches speeds up the synthesis of inductor designs.     

Microstructural engineering applied to the controlled cooling of steel wire rod: Part I. Experimental design and heat transfer

The goal of this study was to develop a mathematical model which incorporates heat flow, phase transformation kinetics, and property-structure-composition relationships to predict the mechanical properties of steel rod being control cooled under industrial conditions. Thus, the principles of microstructural engineering have been brought to bear on this interdisciplinary problem by combining computer modeling with laboratory measurements of heat flow, austenite decomposition kinetics, microstructure and mechanical properties, and industrial trials to determine heat transfer and obtain rod samples under known conditions. Owing to the length and diversity of the study, it is reported in three parts,_[8191]the first of which is concerned with the heat flow measurements. A relatively simple and reliable technique, involving a preheated steel rod instrumented with a thermocouple secured at its centerline, has been devised to determine the cooling rate in different regions of the moving bed of rod loops on an operating Stelmor line. The measured thermal response of the rod has been analyzed by two transient conduction models (lumped and distributed parameter, respectively) to yield overall heat-transfer coefficients for radiation and convection. The adequacy of the technique has been checked by cooling instrumented rods under well-defined, air crossflow conditions in the laboratory and comparing measured heat-transfer coefficients to values predicted from well-established equations. The industrial thermal measurements have permitted the characterization of a coefficient to account for radiative interaction among adjacent rod loops near the edge and at the center of the bed. Formerly Graduate Student, The University of British Columbia.     

Design of software systems based on axiomatic design

The ability to utilize fully automated flexible manufacturing systems (FMS) or develop reliable computer-integrated manufacturing (CIM) systems will depend on our ability to develop reliable and reusable software for large complex systems on a timely basis. To date, software design has not gone very far beyond the ad hoc trial-and-error stage. Consequently, the development of software is slow, expensive, unreliable, and unmanageable. The purpose of this paper is to provide a scientific basis for designing software. The approach used here is that of axiomatic design, which is based on two design axioms: the Independence Axiom and the Information Axiom. The axiomatic approach is based on the recognition of the following common elements in design: the existence of independent domains (i.e. the consumer domain, the functional domain, the physical domain, and the process domain); the need to map between various domains during the design process; the decomposition of the characteristic vectors (i.e. functional requirements, design parameters, and process variables) in their respective domains; the zig-zagging required between the domains for decomposition; and the need to satisfy the design axioms during the design process. The axiomatic approach discussed in this paper provides decision making tools for software design in addition to systematic means of knowledge and data representation, synthesis and analysis of software, and the construction of the module-junction structure diagram.     

Surface chemistry and suspension stability of oxide-nitride powder mixtures

The effect of bimetallic oxide sintering aids on the colloidal stability of homogeneous (surface-coated) and heterogeneous (mechanically mixed) silicon nitride powder mixtures in aqueous solution was studied by acoustophoretic analysis. While the surface charge generation and colloidal stability of single-phase and oxide-coated silicon nitride powder mixtures may be described according to the site dissociation model of amine and hydroxyl surface groups, the surface charge observed in heterogeneous multiphase powder mixtures is associated with the adsorption of soluble metal ion hydroxocomplexes on the nitride particles. Segregation of the mixtures by heteroflocculation, which causes the formation of agglomerates and microstructural defects upon sintering, may be avoided by generation of a threshold surface potential of equal sign on all powder constituents at a pH where the metal hydroxide dissolution is subcritical.