Experimental Study of a Ka-Band Cylindrical Open Resonator

A study of the electrodynamical properties of a Ka-band gyrotron open resonator was experimentally conducted. Experiments were accomplished to measure resonant frequencies and their respective loaded quality factors for TE modes in the frequency range from 26 to 40 GHz. In particular, a perturbation technique was used to determine the axial, radial and azimuthal electric field profiles, as an identification method of the TE₀₂₁ mode operating around 35 GHz. In any experimental event, good agreement with the values predicted by theory was found.     

Increasing the accuracy of thermal transient measurements

Recent developments in the methodology of thermal transient measurements and evaluation are discussed in the paper. All of them are aimed at increasing the accuracy of these measurements and their evaluation. After a short summary of the evaluation methodology a procedure is presented for the correction of the nonconstant powering. New methods are presented for the compensation, evaluation and modeling of the nonlinearities. Various aspects of pulsed powering are discussed in detail.     

Micropower active-RC channel filter for a zero-IF Bluetooth receiver

A fourth-order low-pass channel filter for a zero-IF Bluetooth receiver is presented. It employs two cascaded multiple feedback biquads and active resistors made by quasi-floating gate MOS transistors in triode region for highly linear continuous tuning. Power consumption is strongly reduced using a gain-enhanced class-AB single-stage opamp together with a filter topology that only requires a single opamp for each biquad. The filter has been fabricated in a 0.18 μm CMOS technology and consumes 290 μW from a 1.2 V supply.     

Improving a Cluster Based Directional Channel Model in Realistic Macro-Cell Environment

In this paper a realistic directional channel model that is an extension of the COST 273 channel model is presented. The model uses a cluster of scatterers and visibility region generation based strategy with increased realism, due to the introduction of terrain and clutter information. New approaches for path-loss prediction and line of sight modeling are considered, affecting the cluster path gain model implementation. The new model was implemented using terrain, clutter, street and user mobility information for the city of Lisbon, Portugal. Some of the model’s outputs are presented, mainly path loss and small/large-scale fading statistics.     

Structure and microstructure of EB-PVD yttria thin films grown on Si (111) substrate

Structure and microstructure of yttria thin films grown by electron beam physical vapour deposition on a stationary Si (111) substrate at room temperature (RT), 500° and 700 °C, were investigated by the grazing-incidence X-ray diffraction and scanning electron microscopy, respectively. X-ray photoelectron spectroscopy provided information on the surface contamination from the atmosphere and the Y oxidation state. A strong effect of the deposition temperature and the vapour flux incidence angle was found. The film deposited at RT is polycrystalline with very fine grains of the body-centered cubic (bcc) crystallographic symmetry. An increase of deposition temperature results in a rapid growth of bcc grains with an improved crystalline structure. Moreover, the based-centered monoclinic phase appears for the deposition temperature of 700 °C. Preferred grain orientation (texture) with two main components, (400) and (622), was observed in the films deposited at 500 °C whereas no texture was found for 700 °C. The microstructure exhibits the columnar feather-like structure of different degrees of perfection which can be explained by the shadowing effects caused by an oblique vapour flux incidence angle. Surface morphology of the films is governed by a combination of the triangular and four-sided (square) columns. All films were found to be dense with a little porosity between the columns.     

Nanogeometry matters: unexpected decrease of capillary adhesion forces with increasing relative humidity

The sticking effect between hydrophilic surfaces occurring at increasing relative humidity (RH) is an everyday phenomenon with uncountable implications. Here experimental evidence is presented for a counterintuitive monotonous decrease of the capillary adhesion forces between hydrophilic surfaces with increasing RH for the whole humidity range. It is shown that this unexpected result is related to the actual shape of the asperity at the nanometer scale: a model based on macroscopic thermodynamics predicts this decrease in the adhesion force for a sharp object ending in an almost flat nanometer-sized apex, in full agreement with experiments. This anomalous decrease is due to the fact that a significant growth of the liquid meniscus formed at the contact region with increasing humidity is hindered for this geometry. These results are relevant in the analysis of the dynamical behavior of nanomenisci. They could also have an outstanding value in technological applications, since the undesirable sticking effect between surfaces occurring at increasing RH could be avoided by controlling the shape of the surface asperities at the nanometric scale.     

Fracture and Fatigue Behaviour of Aluminium Matrix Composite Automotive Pistons

The fracture and fatigue behaviour of prototype automotive pistons produced in an aluminium alloy matrix composite in industrial conditions has been studied. Fracture toughness increased when the testing temperature rose from 20° to 75°C and kept near constant up to 250°C, when a significantly lower value was recorded. A change in the failure operating mechanism, which can explain this trend, was observed by analysing the fracture surfaces in the scanning electron microscope. Room temperature fatigue tests performed with R = 0.1 stress ratio led to an average value of the Paris law exponent higher than those reported in aluminium alloys but low for an industrially produced brittle composite. A higher exponent and a much larger scattering were observed in those fatigue tests carried out under R = 0.5 stress ratio.     

Characterization of a multilayer film activated with Lactobacillus curvatus CRL705 bacteriocins

BACKGROUND: Bacteriocins produced by lactic acid bacteria offer enormous promise for food safety preservation. In this study an active multilayer film obtained by the incorporation of lactocin 705 and lactocin AL705, two bacteriocins produced by Lactobacillus curvatus CRL705 with antimicrobial activity against Lactobacillus plantarum CRL691 and Listeria innocua 7, respectively, was characterized for its potential application in active packaging technology. Film activity performance at different storage conditions, bacteriocins transfer into water and sunflower oil, and film surface properties were evaluated. RESULTS: Film activity against L. innocua 7 was maintained during 2, 4 and 6 weeks at 30, 10 and 5 °C respectively. At 30 and 10 °C, activity loss against L. plantarum CRL691 was observed on the second week of storage and after the fourth week at 5 °C. Results showed no significant difference for active multilayer film contact angle and seal properties compared to the control (without bacteriocins). A decrease in lactocin 705 inhibitory activity after sunflower oil contact was observed, while lactocin AL705 remained unaffected. After water contact, film activity was retained for both bacteriocins. CONCLUSIONS: As demonstrated by antimicrobial activity and physico‐mechanical properties retention, lactocin 705 and AL705 active multilayer film present potential for application in active packaging technology. Copyright © 2011 Society of Chemical Industry     

Palynological and physicochemical data characterisation of honeys produced in the Entre‐Douro e Minho region of Portugal

Honey legislation has been addressed to establish the minimum marketing level of the product and the need for consumer protection through correct denominations. Research oriented toward assessment of floral origin and physicochemical properties may increase the commercial value of these products. The characteristics of thirty‐one honeys produced in the Entre‐Douro e Minho region in Portugal were studied. Pollen features and some physicochemical parameters (moisture, ash, pH, free acidity, electrical conductivity, hydroxymethylfurfural contain, apparent sucrose, reducing sugars and diastase activity) were determined. The samples were found to meet international honey specifications. The present study found a linear regression between the ash content of honeys and their specific conductivity. Five samples are listed as Eucalyptus honey, one sample as Citrus honey, and twenty‐five samples as multifloral honeys. Of the total, 87.1% exceeded the quality parameters and should be labelled as ‘virgin’ honey.