Fast finite difference Poisson solvers on heterogeneous architectures

In this paper we propose and evaluate a set of new strategies for the solution of three dimensional separable elliptic problems on CPU–GPU platforms. The numerical solution of the system of linear equations arising when discretizing those operators often represents the most time consuming part of larger simulation codes tackling a variety of physical situations. Incompressible fluid flows, electromagnetic problems, heat transfer and solid mechanic simulations are just a few examples of application areas that require efficient solution strategies for this class of problems. GPU computing has emerged as an attractive alternative to conventional CPUs for many scientific applications. High speedups over CPU implementations have been reported and this trend is expected to continue in the future with improved programming support and tighter CPU–GPU integration. These speedups by no means imply that CPU performance is no longer critical. The conventional CPU-control–GPU-compute pattern used in many applications wastes much of CPU’s computational power. Our proposed parallel implementation of a classical cyclic reduction algorithm to tackle the large linear systems arising from the discretized form of the elliptic problem at hand, schedules computing on both the GPU and the CPUs in a cooperative way. The experimental result demonstrates the effectiveness of this approach.     

Improving the performance of Invertible Bloom Lookup Tables

Invertible Bloom Lookup Tables (IBLTs) have been recently introduced as an extension of traditional Bloom filters. IBLTs store key-value pairs. Unlike traditional Bloom filters, IBLTs support both a lookup operation (given a key, return a value) and an operation that lists out all the key-value pairs stored. One issue with IBLTs is that there is a probability that a lookup operation will return “not found” for a key. In this paper, a technique to reduce this probability without affecting the storage requirement and only moderately increasing the search time is presented and evaluated. The results show that it can significantly reduce the probability of not returning a value that is actually stored in the IBLT. The overhead of the modified search procedure, compared to the standard IBLT search procedure, is small and has little impact on the average search time.     

A genetic tango attack against the David–Prasad RFID ultra‐lightweight authentication protocol

Radio frequency identification (RFID) is a powerful technology that enables wireless information storage and control in an economical way. These properties have generated a wide range of applications in different areas. Due to economic and technological constrains, RFID devices are seriously limited, having small or even tiny computational capabilities. This issue is particularly challenging from the security point of view. Security protocols in RFID environments have to deal with strong computational limitations, and classical protocols cannot be used in this context. There have been several attempts to overcome these limitations in the form of new lightweight security protocols designed to be used in very constrained (sometimes called ultra‐lightweight) RFID environments. One of these proposals is the David–Prasad ultra‐lightweight authentication protocol. This protocol was successfully attacked using a cryptanalysis technique named Tango attack. The capacity of the attack depends on a set of boolean approximations. In this paper, we present an enhanced version of the Tango attack, named Genetic Tango attack, that uses Genetic Programming to design those approximations, easing the generation of automatic cryptanalysis and improving its power compared to a manually designed attack. Experimental results are given to illustrate the effectiveness of this new attack.     

Total content and dialyzable iron and zinc in foods from northern and Southern Mexico

Developing countries diets are based on a variety of plant foods that often are the main suppliers of important amounts of iron (Fe) and zinc (Zn). The objectives of this study were 1) to measure the total and dialyzable amounts of Fe and Zn in foods from Northern Mexico (Sonora) and from Southern Mexico (Oaxaca) and 2) to evaluate the effect of meat content of diets on the dialyzable amount of Fe and Zn. Methods to calculate the total dialyzable amount of Fe and Zn, were those of the AOAC and of Shen et al. Total Fe in e northern Mexican foods went from 0.78 +/- 0.0 to 11.59 +/- to 0.03 mg/ 100g (dry weight, DW); in southern Mexican foods the same micronutrient amounts were 0.86 +/- 0.18 to 8.8 +/- 0.57 mg/100 g (BS). Total Zn values were 0.91 +/- 0.00 to 13.58 +/- 0.05 mg/100 g (DW) in Sonora, and 0.64 +/- 0.18 to 20.80 +/- 0.33 mg/100 g (DW) in Oaxaca. In northern Mexico, foods dialyzable Fe had values from 0.1 +/- 0.04% to 10.6 +/- 0.36% and for Zn from 4.0 +/- 0.21% to 55.32 +/- 0.14%. Meanwhile, the range of values of dialyzable Fe for foods from Oaxaca were from 0.22 +/- 0.06% to 9.40 +/- 0.14% for and from 2.41 +/- 0.26% to 54.27 +/- 1.49% for dialyzable Zn. The average value for dialyzable Fe was higher in the foods that contained meat or meat products (p= 0.001).     

Effect of crystallization on morphology-conductivity relationship in polypyrrole/poly(?-caprolactone) blends

Electrically conducting blends, based on polypyrrole (PPy) as the conductive polymer and poly(?-caprolactone) (PCL) as an insulating polymeric matrix, were prepared by polymerizing pyrrole (Py) in its vapor state inside the PCL matrix. The roles of specific interactions between blend components as well as the crystallization of PCL matrix in the resulting morphology have been analyzed by Fourier-transform infrared spectroscopy (FTIR), thermo-optical analysis (TOA) and atomic force microscopy (AFM). The results indicate that PPy is located within both the intra and interspherulitic regions of the PCL matrix achieving a well-developed connected network. Compared with amorphous matrices, considerable conductivity (around 1 S/cm) was raised with the crystalline PCL matrix with only a relatively low level of the conductive polymer (∼5%) in the blend.     

Comparative study of homogeneous and heterogeneous styrene polymerizations with Ni(acac)2/MAO catalytic system

Styrene polymerization was carried out with Ni(acac)₂/MAO and Ni(acac)₂/SiO₂/MAO. The influence of reaction parameters (Al/Ni mole ratio, catalyst concentration, temperature and time polymerization) on styrene polymerization was evaluated. It was observed that both catalytic systems were affected by reaction parameters and that the heterogeneous catalyst presented higher activity than the homogeneous one. Polystyrenes with different molecular weight, stereoregularity and polydispersity were obtained. These results suggest that different active catalyst species could have been present. In addition, two types of methylaluminoxane (MAO) with different molecular weights were also evaluated as cocatalyst. As a result, the catalyst activity and stereospecificity were strongly affected by the MAO type.     

A Context-Aware Interaction Model for the Analysis of Users’ QoE in Mobile Environments

This article describes a novel approach to model the quality of experience (QoE) of users in mobile environments. The context-aware and ratings interaction model (CARIM) addresses the open questions of how to quantify user experiences from the analysis of interaction in mobile scenarios, and how to compare different QoE records to each other. A set of parameters are used to dynamically describe the interaction between the user and the system, the context in which it is performed and the perceived quality of users. CARIM structures these parameters into a uniform representation, supporting the dynamic analysis of interaction to determine QoE of users and enabling the comparison between different interaction records. Its run-time nature allows applications to make context- and QoE-based decisions in real time to adapt themselves, and thus provide a better experience to users. As a result, CARIM provides unified criteria for the inference and analysis of QoE in mobile scenarios. Its design and implementation can be integrated (and easily extended if needed) into many different development environments. An experiment with real users comparing two different interaction designs and validating user behavior hypotheses proved the effectiveness of applying CARIM for the assessment of QoE in mobile applications.     

Hyperbranched Polymers Containing Cyclopentadienyliron Complexes

A number of hyperbranched polymers containing cyclopentadienyliron moieties were prepared using the A₂+B₃ method. The A₂ compounds used were common diols, dithiols or dichloroarenecomplexes. B₃ compounds included either prepared star-shaped molecules or a purchased triol. The effect of the reaction conditions on the properties of the products was probed. Analysis of the prepared polymers was conducted using ¹H and ¹³C NMR, viscometry, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Viscometry values were generally found to be low, in the range of 0.175–0.300 dl/g. TGA showed losses starting at approximately 230°C and ending at 280°C, corresponding to the decomposition of the cyclopentadienyliron moiety. Degradation of the polyether backbone was found to occur starting at 390–567°C. Glass transition temperatures were found to be between 60 and 134°C, whereas melting temperatures ranged from 155 to 190°C.     

Enhancing thermal and dynamic-mechanical properties of epoxy reinforced by amino-functionalized microcrystalline cellulose

In this study, microcrystalline cellulose (MCC) was chemically modified with 3-(aminopropyl)triethoxysilane and added to epoxy to improve chemical, thermal and dynamic-mechanical characteristics of the composites. The composites were manufactured aided by sonication with 1.0%, 2.5%, or 5.0% wt/wt of untreated MCC or amino-functionalized MCC (MCC-Si). The epoxy/MCC-Si composites showed a decrease in the ─OH band by Fourier-transform infrared spectroscopy, and X-ray diffraction analysis indicated better dispersion. The incorporation of MCC-Si in epoxy resin decreased the heat of reaction, increased activation energy values (E_a) and pre-exponential factor (A), and did not affect thermal degradation. All conversion degree (α) versus temperature curves for the composites showed a sigmoidal shape. MCC-Si composites showed better dynamic-mechanical properties than the MCC counterparts, and the functionalization effect was evidenced in storage modulus (E') and loss modulus (E"). At 2.5% wt/wt of MCC-Si content an increase of 119% in E' at the glassy region, 127% in E' at the rubbery region and 173% in E" was observed compared to the neat resin, whereas the T_g barely changed among samples. Good adhesion between the amino-functionalized MCC and the epoxy matrix was observed at the fracture surface, evidencing that surface modification of MCC improves their chemical interaction.