A novel scheme inspired by the compute-and-forward relaying strategy for the multiple access relay channel

Wireless Networks - This paper proposes a novel scheme for the slow block fading Gaussian multiple access relay channel inspired by the compute-and-forward (CoF) relaying strategy. The CoF relaying...     

Quality Map Thresholding for De-noising of Complex-Valued fMRI Data and Its Application to ICA of fMRI

Although functional magnetic resonance imaging (fMRI) data are acquired as complex-valued images, traditionally most fMRI studies only use the magnitude of the data. FMRI analysis in the complex domain promises to provide more statistically significant information; however, the noisy nature of the phase poses a challenge for successful study of fMRI by complex-valued signal processing algorithms. In this paper, we introduce a physiologically motivated de-noising method that uses phase quality maps to successfully identify and eliminate noisy areas in the fMRI data so they can be used in individual and group studies. Additionally, we show how the developed de-noising method improves the results of complex-valued independent component analysis of fMRI data, a very successful tool for blind source separation of biomedical data.     

Beacon-less geographic multicast routing in a real-world wireless sensor network testbed

We study the problem of geographic multicast routing (GMR) in a wireless sensor network. In particular, we are interested in geographic routing solutions with a very limited control overhead and overall bandwidth consumption. Existing GMR protocols require nodes to periodically exchange beacon messages to gather information about the position of their neighbors. These beacons represent a waste of resources, specially in areas of the network with no active communications. Beacons also induce significant problems in real deployments such as interferences and collisions that cause inconsistencies in neighboring tables. In this paper we propose a new beacon-less geographic multicast routing protocol called BRUMA. Unlike previous solutions, BRUMA uses the propagation of data packets to opportunistically select next hops among those that are reachable from the sending node. In addition, we contribute a novel next hop selection function by which candidate next hops schedule their responses based on their progress along each of the branches of the multicast tree. This allows the protocol to overcome most of the issues of beacon-based solutions in real deployments such as collisions, low-quality links, etc. The results of our empirical tests in a real testbed as well as in simulations show that BRUMA achieves a higher packet delivery ratio and a lower overall bandwidth consumption than GMR, which is the protocol performing best among existing geographic multicast solutions.     

A Multisensor Architecture Providing Location-based Services for Smartphones

This paper introduces a multisensor architecture to fuse data acquired from different sensors available in commodity smartphones in order to build accurate location-based services, and pursuing a good balance between accuracy and performance. Using scale invariant features from the images captured using the smartphone camera, we perform a matching process against previously obtained images to determine the current location of the device. Several refinements are introduced to improve the performance and the scalability of our proposal. Location fingerprinting, based on IEEE 802.11, will be used to determine a cluster of physical points, or zone, where the device seems to be according to the received signal strength. In this way, we will reduce the number of images to analyze to those contained in the tentative zone. Additionally, accelerometers will also be considered in order to improve the system performance, by means of a motion estimator. This set of techniques enables a wide range of location-based applications.     

Recyclable,Flexible, Low‐Power Oxide Electronics

The ability to process and dimensionally scale field‐effect transistors with and on paper and to integrate them as a core component for low‐power‐consumption analog and digital circuits is demonstrated. Low‐temperature‐processed p‐ and n‐channel integrated oxide thin‐film transistors in the complementary metal oxide semiconductor (CMOS) inverter architecture are seamlessly layered on mechanically flexible, low‐cost, recyclable paper substrates. The possibility of building these circuits using low‐temperature processes opens the door to new applications ranging from smart labels and sensors on clothing and packaging to electronic displays printed on paper pages for use in newspapers, magazines, books, signs, and advertising billboards. Because the CMOS circuits reported constitute fundamental building blocks for analog and digital electronics, this development creates the potential to have flexible form factor computers seamlessly layered onto paper. The holistic approach of merging low‐power circuitry with a recyclable substrate is an important step towards greener electronics.     

Experimental Study of a Ka-Band Cylindrical Open Resonator

A study of the electrodynamical properties of a Ka-band gyrotron open resonator was experimentally conducted. Experiments were accomplished to measure resonant frequencies and their respective loaded quality factors for TE modes in the frequency range from 26 to 40 GHz. In particular, a perturbation technique was used to determine the axial, radial and azimuthal electric field profiles, as an identification method of the TE₀₂₁ mode operating around 35 GHz. In any experimental event, good agreement with the values predicted by theory was found.     

Micropower active-RC channel filter for a zero-IF Bluetooth receiver

A fourth-order low-pass channel filter for a zero-IF Bluetooth receiver is presented. It employs two cascaded multiple feedback biquads and active resistors made by quasi-floating gate MOS transistors in triode region for highly linear continuous tuning. Power consumption is strongly reduced using a gain-enhanced class-AB single-stage opamp together with a filter topology that only requires a single opamp for each biquad. The filter has been fabricated in a 0.18 μm CMOS technology and consumes 290 μW from a 1.2 V supply.     

Improving a Cluster Based Directional Channel Model in Realistic Macro-Cell Environment

In this paper a realistic directional channel model that is an extension of the COST 273 channel model is presented. The model uses a cluster of scatterers and visibility region generation based strategy with increased realism, due to the introduction of terrain and clutter information. New approaches for path-loss prediction and line of sight modeling are considered, affecting the cluster path gain model implementation. The new model was implemented using terrain, clutter, street and user mobility information for the city of Lisbon, Portugal. Some of the model’s outputs are presented, mainly path loss and small/large-scale fading statistics.     

Structure and microstructure of EB-PVD yttria thin films grown on Si (111) substrate

Structure and microstructure of yttria thin films grown by electron beam physical vapour deposition on a stationary Si (111) substrate at room temperature (RT), 500° and 700 °C, were investigated by the grazing-incidence X-ray diffraction and scanning electron microscopy, respectively. X-ray photoelectron spectroscopy provided information on the surface contamination from the atmosphere and the Y oxidation state. A strong effect of the deposition temperature and the vapour flux incidence angle was found. The film deposited at RT is polycrystalline with very fine grains of the body-centered cubic (bcc) crystallographic symmetry. An increase of deposition temperature results in a rapid growth of bcc grains with an improved crystalline structure. Moreover, the based-centered monoclinic phase appears for the deposition temperature of 700 °C. Preferred grain orientation (texture) with two main components, (400) and (622), was observed in the films deposited at 500 °C whereas no texture was found for 700 °C. The microstructure exhibits the columnar feather-like structure of different degrees of perfection which can be explained by the shadowing effects caused by an oblique vapour flux incidence angle. Surface morphology of the films is governed by a combination of the triangular and four-sided (square) columns. All films were found to be dense with a little porosity between the columns.     

Nanogeometry matters: unexpected decrease of capillary adhesion forces with increasing relative humidity

The sticking effect between hydrophilic surfaces occurring at increasing relative humidity (RH) is an everyday phenomenon with uncountable implications. Here experimental evidence is presented for a counterintuitive monotonous decrease of the capillary adhesion forces between hydrophilic surfaces with increasing RH for the whole humidity range. It is shown that this unexpected result is related to the actual shape of the asperity at the nanometer scale: a model based on macroscopic thermodynamics predicts this decrease in the adhesion force for a sharp object ending in an almost flat nanometer-sized apex, in full agreement with experiments. This anomalous decrease is due to the fact that a significant growth of the liquid meniscus formed at the contact region with increasing humidity is hindered for this geometry. These results are relevant in the analysis of the dynamical behavior of nanomenisci. They could also have an outstanding value in technological applications, since the undesirable sticking effect between surfaces occurring at increasing RH could be avoided by controlling the shape of the surface asperities at the nanometric scale.