Effect of alkali halides on α-chymotrypsin activity in the plastein reaction

The influence of different alkali halides (LiF, LiCl. LiBr, NaF, NaCl, NaBr, KF, KCl and KBr) on α-chymotrypsin-catalysed plastein synthesis has been studied in aqueous medium at different substrate concentrations. The results showed an enhancing effect on the plastein synthesis enzyme action by the presence of salts, proportional to salt concentration, which was decreased when the substrate concentration was increased. Additionally, these facts allowed the ions to be classified as a function of their activation power (F^? > Cl^? > Br^?: K⁺ > Na⁺ > Li⁺), which was in agreement with the interpretation of the Hofmeister lyotropic series. The influence of the several phenomena produced by the presence of salts in the plastein reaction, such as, salt-substrate interactions and water activity, as well as the presence of deactivated enzyme was also analysed. The obtained results showed that the substrate concentration is the most important factor, and the activating effect of salts could be simultaneously involved with both a structural change on the substrate conformation and a reduction of water activity into the reaction media, enhancing the catalytic capability of the α-chymotrypsin towards a peptide synthesis action.     

Long-term performance calculations based on steady-state efficiency test results: Analysis of optical effects affecting beam,diffuse and reflected radiation

There are a growing number of commercially available solar thermal collector types: flat plates, evacuated tubes with and without back reflectors and different tubular spacing or low concentration collectors, using different types of concentrating optics.These different concepts and designs all compete to be more efficient or simply cheaper, easier to operate, etc. at ever higher temperatures, and to extend the use of solar thermal energy in other applications beyond the most common water heating purposes.In view of the proper dimensioning of solar thermal systems and proper comparison of different collector technologies, for a given application, there is a growing need for existing and future simulation tools to be as accurate as possible in the treatment of these different collector types.Collector heat losses are usually considered to be well determined, under variable operating conditions, through the use of the heat loss coefficients provided by efficiency curve parameters. Yet, the traditional approach to the optical efficiency fails to describe accurately the optical effects affecting the amount of radiation which actually reaches the absorber.This paper develops a systematic approach to the proper handling of incident solar radiation, folding that with the information available from tests for determination of collector efficiency curve (steady-state) and the way the optics of different collector types uses incident solar radiation and transforms it into useful heat.     

New approach for swinging up the Furuta pendulum: Theory and experiments

The problem of swinging up inverted pendulums has often been solved by stabilizing a particular class of homoclinic structures present in the dynamics of a physical pendulum. Here, new arguments are suggested to show how other homoclinic curves can be preplanned for dynamics of the passive-link of the robot. This is done by reparameterizing the motions according to geometrical relations among the generalized coordinates, which are known as virtual holonomic constraints. After that, conditions that guarantee the existence of periodic solutions surrounding the planned homoclinic orbits are derived. The corresponding trajectories, in contrast to homoclinic curves, admit efficient design of feedback control laws ensuring exponential orbital stabilization. The method is illustrated by simulations and supported by experimental studies on the Furuta pendulum. The implementation issues are discussed in detail.     

Analyzing the effects of technological,organizational and competition factors on Web knowledge exchange in SMEs

Internet technologies are increasingly being used within all knowledge management processes, including knowledge acquisition, knowledge exchange and knowledge use. Although technological issues are key drivers for Internet technologies adoption and use, organizational and environmental aspects have been found to be equally important. This paper extends previous studies on the use of Internet technologies and knowledge management by analyzing factors affecting Web knowledge exchange in small and medium-sized enterprises (SMEs). More specifically, by drawing on the technology–organization–environment framework, a model to examine how distinct contextual factors influence Web knowledge exchange in SMEs is developed. The hypotheses are tested by using structural equation modelling on a large sample of Spanish SMEs from different industries. Results suggest that IT expertise and commitment-based human resource practices positively affect Web knowledge exchange, with the latter being the strongest factor in our proposed model. In contrast, a negative relationship is found between competition and Web knowledge exchange.     

Electronic protection and routing optimization of MANETs operating in an electronic warfare environment

Domination of the electromagnetic spectrum is a crucial component of the 21st century warfare. In the harsh electromagnetic environment of the modern battlefield, it is of the utmost importance to deny the opposing force the opportunity to attack or exploit the detection/interception of friendly communications assets through the deployment of electronic protection (EP) measures in order to attain low probability of detection (LPD), low probability of interception (LPI) and anti-jam (A/J). Given that directional antennas are a suitable means to achieve both extended range and LPD/LPI, this paper proposes mechanisms to optimize the trade-off between these capabilities, minimizing the number of hops and end-to-end delay when routing packets in a multi-hop ad-hoc network, while taking into account stealth requirements. The novel scheme is based on a variant of Fisheye State Routing, coupled with a power control algorithm to guarantee a LPD/LPI beyond the zone covered by the omni-directional radiation footprint of the network. The performance of the proposed scheme is evaluated through computer simulation.     

Effects of freezing and frozen storage on the physicochemical and sensory characteristics of four types of goat's cheese

Summary Physicochemical and organoleptic properties were studied in two batches of four different types of goat's milk cheese: fresh, washed curd, soft with surface flora, and Majorero, frozen for four months prior to ripening and/or chilled storage. Frozen storage did not produce significant changes in the rheological or sensory characteristics of the cheeses, except in the case of fresh cheese, the textural characteristics of which were adversely affected. The level of proteolysis, estimated from the amino-acid nitrogen, was higher in the pre-frozen washed curd, soft with surface flora, and Majorero cheeses. The level of lipolysis was comparable, except in the soft cheese with surface flora, which presented higher levels of free fatty acids when stored frozen before ripening.

---

Einfluß des Gefrierens und der Gefrierlagerung auf die physikalisch-chemischen und organoleptischen Eigenschaften von vier Ziegenkäsen

Zusammenfassung Aus Ziegenmilch wurden jeweils zwei Chargen von vier spanischen Käsesorten hergestellt: Frischkäse, gewaschene Käsemasse, Weichkäse mit Oberflächenflora und Majorero -Käse. Von jeder Charge wurde die Hälfte gefroren gelagert und erst nach vier Monaten auf die übliche Weise gereift und/oder gekühlt aufbewahrt. Die physikalisch-chemischen und organoleptischen Eigenschaften wurden danach untersucht. Im Vergleich mit Käsen, die nicht gefroren gewesen waren, ergaben sich keine wesentlichen Unterschiede in den rheologischen und sensorischen Eigenschaften, mit Ausnahme bei den Frischkäsen, bei dem sich die Textur durch die Aufbewahrung in gefrorenem Zustand verschlechtert hatte. Der Gehalt an freien Aminosäuren, ein Maß für die Proteolyse, war höher in der gewaschenen Käsemasse, in dem Weichkäse mit Oberflächenflora und in dem Majorero-Käse, die vier Monate gefroren gewesen waren. Durch die Gefrierlagerung hatte sich der Fettabbau nicht verändert, mit Ausnahme bei dem Käse mit Oberflächenflora, bei dem der Gehalt an freien Fettsäuren erhöht war im Vergleich mit dem Käse, der nicht vier Monate gefriergelagert worden war.

     

Micropower active-RC channel filter for a zero-IF Bluetooth receiver

A fourth-order low-pass channel filter for a zero-IF Bluetooth receiver is presented. It employs two cascaded multiple feedback biquads and active resistors made by quasi-floating gate MOS transistors in triode region for highly linear continuous tuning. Power consumption is strongly reduced using a gain-enhanced class-AB single-stage opamp together with a filter topology that only requires a single opamp for each biquad. The filter has been fabricated in a 0.18 μm CMOS technology and consumes 290 μW from a 1.2 V supply.     

Improving a Cluster Based Directional Channel Model in Realistic Macro-Cell Environment

In this paper a realistic directional channel model that is an extension of the COST 273 channel model is presented. The model uses a cluster of scatterers and visibility region generation based strategy with increased realism, due to the introduction of terrain and clutter information. New approaches for path-loss prediction and line of sight modeling are considered, affecting the cluster path gain model implementation. The new model was implemented using terrain, clutter, street and user mobility information for the city of Lisbon, Portugal. Some of the model’s outputs are presented, mainly path loss and small/large-scale fading statistics.     

Data‐driven bounded‐error fault detection

In this paper, a new data‐driven fault‐detection method is proposed. This method is based on a new nonparametric system identification approach, which constitutes the principal contribution to this work. The fault‐detection method is a parametric model‐free approach that can be applied to nonlinear systems that work at various operating points. Not only can the fault‐detection process be applied to the steady state of each operating point, but it can also be applied to the transient state resulting from a change in the operating point. In order to detect faults, the proposed method uses an interval predictor based on bounded‐error techniques. The utilization of techniques based on bounded error enables system uncertainties to be included in an explicit way. This in turn leads to the possibility of obtaining interval predictions of the behaviour of the system, which include information on the reliability of the prediction itself. In order to show the effectiveness of the fault‐detection method, two examples are presented: in the form of a simulated process (counter‐flow shell‐and‐tube heat‐exchanger system) and an example of a real application (two‐tanks system). A comparison with two fault‐detection methods has also been included. Copyright © 2013 John Wiley & Sons, Ltd.