Effect of crystallization on morphology-conductivity relationship in polypyrrole/poly(?-caprolactone) blends

Electrically conducting blends, based on polypyrrole (PPy) as the conductive polymer and poly(?-caprolactone) (PCL) as an insulating polymeric matrix, were prepared by polymerizing pyrrole (Py) in its vapor state inside the PCL matrix. The roles of specific interactions between blend components as well as the crystallization of PCL matrix in the resulting morphology have been analyzed by Fourier-transform infrared spectroscopy (FTIR), thermo-optical analysis (TOA) and atomic force microscopy (AFM). The results indicate that PPy is located within both the intra and interspherulitic regions of the PCL matrix achieving a well-developed connected network. Compared with amorphous matrices, considerable conductivity (around 1 S/cm) was raised with the crystalline PCL matrix with only a relatively low level of the conductive polymer (∼5%) in the blend.     

Attractiveness to mexican fruit flies of combinations of acetic acid with ammonium/amino attractants with emphasis on effects of hunger

Ammonium acetate was more attractive than other ammonium salts to Mexican fruit flies (Anastrepha ludens) in an orchard test. We hypothesized that acetic acid enhanced the attractiveness of ammonia in the orchard test and that acetic acid may similarly enhance attractiveness of AMPu, an attractant consisting of a mixture of ammonium bicarbonate or ammonium carbonate, methylamine HCl, and putrescine. In laboratory experiments, acetic acid was attractive to flies deprived of either yeast hydrolysate or both sugar and yeast hydrolysate but not to flies fed both sugar and yeast hydrolysate. AMPu/acetic acid combinations were more attractive than AMPu alone to flies deprived of both sugar and yeast hydrolysate but not to flies fed sugar, regardless of yeast hydrolysate deprivation status. Acetic acid is the first attractant found that has become more attractive with both sugar and protein deprivation in studies withA. ludens. It is also the first that has enhanced the attractiveness of another attractant type. In orchard tests, yellow sticky panels baited with either AMPu or 17 mg of acetic acid were at least six times more attractive than unbaited panels. However, panels baited with both acetic acid (17–68 mg) and AMPu were less attractive than AMPu alone. These results differed from the laboratory data in which combinations were never less attractive than AMPu alone.     

Comparative study of homogeneous and heterogeneous styrene polymerizations with Ni(acac)2/MAO catalytic system

Styrene polymerization was carried out with Ni(acac)₂/MAO and Ni(acac)₂/SiO₂/MAO. The influence of reaction parameters (Al/Ni mole ratio, catalyst concentration, temperature and time polymerization) on styrene polymerization was evaluated. It was observed that both catalytic systems were affected by reaction parameters and that the heterogeneous catalyst presented higher activity than the homogeneous one. Polystyrenes with different molecular weight, stereoregularity and polydispersity were obtained. These results suggest that different active catalyst species could have been present. In addition, two types of methylaluminoxane (MAO) with different molecular weights were also evaluated as cocatalyst. As a result, the catalyst activity and stereospecificity were strongly affected by the MAO type.     

A Context-Aware Interaction Model for the Analysis of Users’ QoE in Mobile Environments

This article describes a novel approach to model the quality of experience (QoE) of users in mobile environments. The context-aware and ratings interaction model (CARIM) addresses the open questions of how to quantify user experiences from the analysis of interaction in mobile scenarios, and how to compare different QoE records to each other. A set of parameters are used to dynamically describe the interaction between the user and the system, the context in which it is performed and the perceived quality of users. CARIM structures these parameters into a uniform representation, supporting the dynamic analysis of interaction to determine QoE of users and enabling the comparison between different interaction records. Its run-time nature allows applications to make context- and QoE-based decisions in real time to adapt themselves, and thus provide a better experience to users. As a result, CARIM provides unified criteria for the inference and analysis of QoE in mobile scenarios. Its design and implementation can be integrated (and easily extended if needed) into many different development environments. An experiment with real users comparing two different interaction designs and validating user behavior hypotheses proved the effectiveness of applying CARIM for the assessment of QoE in mobile applications.     

A novel attractant for Mexican fruit fly,Anastrepha ludens,from fermented host fruit

Chemicals from fermented chapote fruit were identified and evaluated as attractants for hungry adult Mexican fruit flies in laboratory and greenhouse bioassays. Twenty-eight chemicals identified from an attractive gas-chromatography fraction were as attractive as a chapote volatiles extract (CV) when mixed in the same amounts found in CV. Sixteen of the chemicals were slightly attractive to flies when tested individually. A mixture containing 15 of the chemicals by design and the 16th as an impurity, in arbitrary concentrations, was at least as attractive as the original CV. In a series of experiments, the number of chemicals was reduced to three by elimination of unnecessary components. The three-component mixture retained the attractiveness of the 15-component mixture. The three chemicals were 1,8-cineole, ethyl hexanoate, and hexanol (CEH). Attractiveness of the three-chemical mixture was equal to the sum of the attractiveness of the three individual components, suggesting that each chemical binds to a different receptor type that independently elicits partial attraction behavior. Optimal ratios were 1011 of the three chemicals, respectively. Optimal test quantities ranged between 0.4–4g of 1,8-cineole and 40–400 ng each of ethyl hexanoate and hexanol applied to filter paper in the laboratory bioassays. A neat 1011 mixture of the chemicals was 1.8 times more attractive than aqueous solutions ofTorula dried yeast and borax to starved 2-day-old flies when the lures were tested in competing McPhail traps in a large greenhouse cage.Diptera: Tephritidae.     

Hyperbranched Polymers Containing Cyclopentadienyliron Complexes

A number of hyperbranched polymers containing cyclopentadienyliron moieties were prepared using the A₂+B₃ method. The A₂ compounds used were common diols, dithiols or dichloroarenecomplexes. B₃ compounds included either prepared star-shaped molecules or a purchased triol. The effect of the reaction conditions on the properties of the products was probed. Analysis of the prepared polymers was conducted using ¹H and ¹³C NMR, viscometry, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Viscometry values were generally found to be low, in the range of 0.175–0.300 dl/g. TGA showed losses starting at approximately 230°C and ending at 280°C, corresponding to the decomposition of the cyclopentadienyliron moiety. Degradation of the polyether backbone was found to occur starting at 390–567°C. Glass transition temperatures were found to be between 60 and 134°C, whereas melting temperatures ranged from 155 to 190°C.     

Gripper Design for Radio Base Station Autonomous Maintenance System

For an autonomous system to perform maintenance tasks in a networking device or a radio base station (RBS), it has to deal with a series of technological challenges ranging from identifying hardware-related problems to manipulating connectors. This paper describes the development of a robot maintenance system dedicated to detect and resolve faulty links caused by unplugged or poorly connected cables. Although the maintenance system relies on four subsystems, we significantly focus on our low-cost and efficient custom gripper solution developed to handle RJ45 Ethernet connectors. To examine our gripper, we conducted three experiments. First, a qualitative questionnaire was submitted to 30 users in the case of the teleoperated scenario of the gripper attached to a robotic arm. Similarly, we also tested the automatic operation mode. The results showed that our system is reliable and delivers a highly efficient maintenance tool in both teleoperated and autonomous operation modes. The practical experiment containing the removal or unplugging of connectors demonstrated our gripper’s ability to adequately handle these, whereas the feedback from the questionnaire pointed to a positive user experience. The automatic test assessed the gripper’s robustness against the continuous operation.

     

Time-domain Analysis of Laboratory Experiments on the Transient Pressure Damping in a Leaky Polymeric Pipe

Water Resources Management - The pressure damping occurring in pressurized pipes with a leak during transients has been examined as a diagnostic tool – the so-called transient damping method...     

A finite volume–finite difference method with a stiff ordinary differential equation solver for advection–diffusion–reaction equation

A model for atmospheric pollutant transport is proposed considering an advection–diffusion–reaction equation. A splitting method is used to decouple the advection, diffusion and reaction parts. A scheme based on finite volume, finite difference and backward differentiation formula is used for solving an atmospheric transport-chemistry problem.     

Beyond multi-adjoint logic programming

In ‘multi-adjoint logic programming’, MALP in brief, each fuzzy logic program is associated with its own ‘multi-adjoint lattice’ for modelling truth degrees beyond the simpler case of true and false, where a large set of fuzzy connectives can be defined. On this wide repertoire, it is crucial to connect each implication symbol with a proper conjunction thus conforming constructs of the form (←_i, &_i) called ‘adjoint pairs’, whose use directly affects both declarative and operational semantics of the MALP framework. In this work, we firstly show how the strong dependence of adjoint pairs can be largely weakened for an interesting ‘sub-class’ of MALP programs. Then, we reason in a similar way till conceiving a ‘super-class’ of fuzzy logic programs beyond MALP, which definitively drops out the need for using adjoint pairs, since the new semantics behaviour relies on much more relaxed lattices than multi-adjoint ones.