硅微板条谐振式传感器谐振频率分析及计算

对硅微机械谐振式传感器的谐振频率计算提出了新的物理模型—两端固支薄板条模型，该模型不同于常说的硅桥（梁）或硅弦模型。计算结果表明该模型更符合实际，优于有关文献结果。     

Renal osteodystrophy in diabetic patients

To assess the effects of diabetes mellitus on renal osteodystrophy, we examined the database of 256 patients (45% on hemodialysis and 55% on peritoneal dialysis) who were prospectively studied in three Toronto dialysis centers between October of 1987 and 1989. All patients had serial documentation of their clinical, laboratory and risk parameters of bone disease, and completed a series of investigations that included the deferoxamine test, measurement of intact 1-84 PTH levels, and an iliac crest bone biopsy. Twenty-five percent of these patients were diabetic. When compared to non-diabetic patients, they were on dialysis for a shorter duration (2.4 +/- 0.3 vs. 4.7 +/- 0.3 years; P < 0.0002), used calcium carbonate as the only phosphate binder more frequently (40 vs. 25%; P < 0.007), and had lower parathyroid hormone levels (12 +/- 1.4 vs. 24 +/- 2.3 pmol/liter; P < 0.002). High-turnover bone disorders (that is, osteitis fibrosa and mixed disorder) were distinctly uncommon (8 vs. 33%; P < 0.01 by Fisher's exact test), while the mild (19 vs. 9%; P = NS) and the aplastic disorders (with mean stainable bone surface aluminum of 6.5 +/- 0.7%) (46 vs. 31%; P = NS) tended to be more common in diabetic patients. The prevalence of aluminum bone disease was the same in both groups (27%). Diabetic patients ingested a smaller cumulative dose of aluminum gels (3.7 +/- 0.6 vs. 9.3 +/- 1.1 kg; P < 0.005), yet had a higher rate of aluminium accumulation on bone surfaces than non-diabetic patients (1.5 +/- 0.19 vs. 0.96 +/- 0.10% per month on dialysis; P < 0.015).(ABSTRACT TRUNCATED AT 250 WORDS)     

电流变体特性及电流变体应用器件的进展

本文详细评述了电流变体(ERF)材料的组成、工作机理及其流变力学性能,提出以Bingham塑性体来近似描述电流变体的流变特性,综述了电流变体在智能材料、汽车离合器、液压阀门等器件中的应用,给出了含电流变体的双层智能复合材料梁单层、双层加电状态对其振动特性的影响,设计了含电流变体的主动控制式减振器,并对其在外加电场作用下的减振性能进行了评价。     

瞬态光的光电摄谱测量

“光电摄谱法”是一种辐射光谱计量参数的测量方法,此法解决了单次脉冲闪光灯辐射光谱相对能量分布的精确测量问题。本文介绍了这种方法的测量原理、方法和特点,同时阐述了对接收器件、光路系统和时控电器系统的要求,并以自行研制的闪光光谱测定仪为例,对其计量参数波长和相对能量的标定与校正给予了必要的讨论,最后以实测结果证实了该方法的可靠性。     

数据处理系统性能评价的简单理论模型

提出了一个简单的理论模型．旨在为数据处理系统的性能评价提出一个理论框架．以此框架为基础，可形成实用的简单评估方法．该模型只含两个参数，它们是统计量，可用统计方法确定．     

含油废水处理

在水量水质调查的基础上，本文提出了以出水回用为目的的含油废水隔油调节沉淀－混凝沉淀－砂滤处理工艺，动态模型试验表明，废水中油和ＣＯＤ的去除率分别达到９５％和９０％，出水浊度低于２，此水质完全可回用于有关生产车间。     

Efficient Skyline and Top-k Retrieval in Subspaces

Skyline and top-k queries are two popular operations for preference retrieval. In practice, applications that require these operations usually provide numerous candidate attributes, whereas, depending on their interests, users may issue queries regarding different subsets of the dimensions. The existing algorithms are inadequate for subspace skyline/top-k search because they have at least one of the following defects: 1) they require scanning the entire database at least once, 2) they are optimized for one subspace but incur significant overhead for other subspaces, or 3) they demand expensive maintenance cost or space consumption. In this paper, we propose a technique SUBSKY, which settles both types of queries by using purely relational technologies. The core of SUBSKY is a transformation that converts multidimensional data to one-dimensional (1D) values. These values are indexed by a simple B-tree, which allows us to answer subspace queries by accessing a fraction of the database. SUBSKY entails low maintenance overhead, which equals the cost of updating a traditional B-tree. Extensive experiments with real data confirm that our technique outperforms alternative solutions significantly in both efficiency and scalability.     

关于吉林省非织造布工业发展的探讨

本文概述了吉林省非织造布工业的发展现状，对存在问题进行了综合分析和论述，提出了对吉林省非织造布工业发展的建议。     

LiMn2O4纳米粉的湿化学合成与表征

采用湿化学方法，通过水溶液中的化学反应直接合成纳米级LiMn2O4化合物，其结构基本上为无定型，但XRD图谱中已出现LiMn2O4特征峰，说明在水溶液中已初步形成尖晶石结构，运用XRD，SEM，TG－DTA等现代检测手段对样品的性能进行进行了表征，XRD及SEM等分析结果表明，合成样品经简单热处理后，晶型结构完善，形貌规整，均匀，比表面积积显著减小，粒度明显变粗。TG－DTA热分析证明，样品在低于900℃的温度下进行热处理时，仅发生LiMn2O4的晶化过程，产物的化学组成稳定，该法合成锂离子电池正极材料LiMn2O4，具有工艺流程简单，产物的成分，结构及粒度均匀等特点。     

激光熔覆用钴基合金粉末的研究

对激光熔覆用WFLC－11钴基合金粉末的激光熔覆工艺和熔覆层性能进行了研究，获得了WFLC－11钴基合金粉末激光熔覆层厚度与最小比能量关系曲线和熔覆层的组织、高温硬度等性能数据，为选择和使用WFLC－11钴基合金粉末提供了依据。