Peroxide crosslinking of rigid poly(vinyl chloride)

The optimum conditions for crosslinking rigid poly(vinyl chloride) with trimethylolpropane trimethacrylate (TMPTMA) and peroxide have been examined. The extent of crosslinking was measured by determining gel content by Soxhlet extraction in tetrahydrofuran. Mechanical properties were measured at 130°C and dynamic viscoelastic measurements were carried out to detect changes in the glass transition temperature (T_g). It was found that 15 phr of TMPTMA and 0.3 phr of peroxide were optimum concentrations for maximizing the extent of crosslinking, tensile strength, and T_g. The lower molding temperature of 170°C was preferred to minimize thermal degradation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2904–2909, 2007     

基于混合优化算法的云计算资源调度

由于云计算的动态性、异构性和不可预测性等特点,使得资源调度策略面临很大的挑战。目前解决资源调度的方法主要是一些启发式算法,如模拟退火算法、人工神经网络算法、粒子群算法、蚁群算法和遗传算法等,由于优缺点分明,不能单独实现云计算任务的最优分配。因此,提出了使用混合优化算法解决云计算资源分配问题。在算法前期,借助粒子群全局广泛搜索能力,快速寻找到较优解;在算法后期,借助蚁群算法的正反馈性和高效性,寻找最优解。实验表明该算法有较短的任务执行时间和实现各个物理主机间的负载均衡。     

葡聚糖修饰漆酶的制备及其催化特性和稳定性

将经NaIO₄氧化处理的葡聚糖（500×10³）连接在漆酶分子上以提高漆酶在酸性溶液环境中的稳定性。HPLC和SDS-PAGE分析表明葡聚糖修饰漆酶的分子量在200×10³以上。荧光光谱和圆二色性光谱分析表明修饰漆酶保持了天然漆酶的三级和二级结构。酶催化反应显示修饰漆酶与天然漆酶具有类似的底物亲和性和催化活性，而其在酸性条件下的稳定性显著提高。通过葡聚糖修饰使得漆酶在pH 3,50℃下的酶活半衰期从0. 07 h提高到17. 1 h，在含30%（体积）乙腈, pH 3下的酶活半衰期从0. 11 h提高到10. 3 h。在不同pH下测定修饰漆酶在216 nm处的圆二色性光谱，结果显示偶联葡聚糖增强了漆酶分子的结构稳定性，提高了其在高温及有机溶剂存在下的催化活性。     

Preparation and application of polybenzoxazine adsorption resin

The synthesis and application of polybenzoxazine adsorption resin was studied. First, the precursor was synthesized by the solventless method. And then a kind of spherical and granular polybenzoxazine resin was obtained using reverse‐phase suspension polymerization technique in the process of solidification. Besides, the influence of dispersion medium, the volume ratio of precursor to medium, the solidification temperature, and the agitation speed were studied in detail in the process of polymerization. Second, the spherical shape of the polybenzoxazine resin was identified by scanning electronic microscope and the thermal stability of resin was measured by thermogravimetric analysis. Finally, the adsorption capacity of the spherical resin on pyridine was studied in cyclohexane systems. The correlation coefficient of Langmuir adsorption constant temperature line was bigger than 0.99, which indicated that the equilibrium sorption date was coincident with the Langmuir isotherm equation. And the saturated adsorptive capacity of dried resin achieved 222.2 mg g^?1. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

秋季太湖叶绿素a浓度荧光反演研究

基于2007年11~12月太湖全湖实测水质参数和光谱数据,首先利用高斯方程对遥感反射率进行过滤分解,找出叶绿素a(chl\|a)吸收峰675 nm以后的荧光反射峰(Fluorescence Peak:FP),再以662 nm处的反射率为基准,采用归一化荧光高度法进行叶绿素a浓度(C chl-a)反演,得到chl-a反演模型。基于高斯分解获取的chl-a的荧光反射峰值R(FP)与662 nm处的反射率R (662)比值［R(FP)/R(662)］与C chl-a之间存在显著的相关性,该模型为秋季太湖水体C chl-a的最佳反演模型。在高悬浮泥沙条件下,该模型能够较好地表示出叶绿素荧光高度与叶绿素浓度之间的关系,为C chl-a反演提供新的方法和依据,并为传感器敏感波段的选取和设置提供参考。     

氧化铝陶瓷基无线无源压力传感器的高温性能研究

利用高温烧结陶瓷技术制备了一种基于氧化铝陶瓷的LC谐振式无线无源压力传感器,并通过合理地设计圆柱螺旋天线以及隔热结构,实现了该传感器在高温环境中的无线耦合测试。研究了传感器在不同温度下的阻抗频率特性,分析并探讨了传感器的高温性能。测试结果表明,在29℃(室温)至700℃的温度范围内,测试天线端的最高瞬时温度为188.4℃,保证了传感器高温测试的可靠性。谐振频率对温度的平均变化量为1.314 kHz/℃,两次重复性测试的相对变化量为3.81%,重复性较好。该压力传感器可应用于高温恶劣环境下的压力测试,其高温性能的研究为压力信号的准确读取奠定了良好的基础。     

聚丙烯的晶型及常用成核剂

介绍了α,β这两种最重要的聚丙烯的结晶形态及性能特点,阐述了常用的α晶型成核剂(包括无机成核剂、有机成核机和高分子成核剂)及β晶型成核剂的结构特点和使用性能,并结合当前的工作展望了成核剂的发展方向。     

Processing and characterization of particles reinforced SiOC composites via pyrolysis of polysiloxane with SiC or/and Al fillers

Polysiloxane loaded with SiC as inert filler, and Al as active filler, was pyrolyzed in nitrogen to fabricate SiOC composites, and the processing and properties of the filled SiOC composites were investigated. Adding SiC fillers could reduce the linear shrinkage of filler-free cured polysiloxane in order to obtain monolithic SiC/SiOC composites. The flexural strength of SiC/SiOC composites reached 201.3 MPa at a SiC filler content of 27.6 vol.%. However, SiC/SiOC composites exhibited poor oxidation resistance, thermal shock resistance and high temperature resistance. Al fillers could react with hydrocarbon generated during polysiloxane pyrolysis at 600 °C and N₂ at 800 °C to form Al₄C₃ and AlN, respectively. The volume expansions resulting from these two reactions were in favor of the reduction in linear shrinkage and the improvement in flexural strength of SiC/SiOC composites. The flexural strength of Al-containing SiC/SiOC composites was 1.36 times that of SiC/SiOC composites without Al at an Al filler content of 20 vol.%. The addition of Al fillers remarkably improved the high temperature resistance and oxidation resistance of SiC/SiOC composites, but not thermal shock resistance.     

Coupling of nuclear heating reactor with desalination process

A seawater desalination plant using a nuclear heating reactor (NHR) coupled with the multi-effect distillation (MED) process was developed by the Institute of Nuclear Energy Technology, Tsinghua University, China. The seawater desalination plant was designed to supply potable water demand to some coastal location or island where both fresh water and energy sources are severely lacking. The NHR design possesses intrinsic and passive safety features, which was demonstrated by the NHR-5 experiences. The intermediate circuit and steam circuit were designed as the safety barriers between the NHR and MED desalination systems. With the power range of the heating reactor within 10 to 200 MWt, the desalination plant could provide 8,000 to 160,000 m³/d of potable water of appropriate quality. The design concept and parameters, safety features, and comparative investigation of coupling schemes are presented in the paper.     

Dynamic viscoelasticity of low‐density polyethylene/in‐situ‐grafted carbon black composite

The study on the dynamic viscoelastic properties of grafted carbon black (g‐CB) filled low‐density polyethylene (LDPE) was carried out. Because of formation of CB networking, the characteristic modulus plateau and loss tangent arc appears. Addition of grafting monomer like butyl acrylate (BA) and acroleic acid (AA) enhances the interaction between particles and matrix due to accelerated formation of micronetworking in the composites induced by forming branch chains of AA and BA with multiunit. The decrease of the temperature corresponding to α_c mechanical relaxation together with AA (BA) addition given by the position of loss tangent (tan δ) peak for LDPE is owed to the formation of long‐chain polymer grafted between CB and the matrix, which facilitates the slip of the lamella of LDPE. The influence of maleic anhydride (MA) on enhancing interaction between LDPE and CB is not so pronounced, as compared with AA and BA because of no formation of long chain between CB particle and polymer matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4127–4132, 2006