基于虚拟仪器的水电机组在线状态监测系统的研究*

随着水电机组状态检修的不断开展, 需要实现对机组的状态监测, 及时了解机组的运行情况并能及时处理。考虑到水电机组状态监测的多样性和复杂性, 结合实际, 提出水电机组在线状态监测的项目和基于PXI 总线仪器和LabVIEW 的具体实施方案。状态监测系统通过对水电机组状态量的采集、处理和分析, 来实现水电机组运行状态在线实时监测, 极大地提高了机组利用率。该系统在水电机组的状态检修中得到了实际应用。     

Design and experimental study of a compact quasi-zero-stiffness isolator using wave springs

Science China Technological Sciences - The quasi-zero-stiffness (QZS) vibration isolation has been proven to be an effective way to isolate low-frequency vibration. However, most of the existing...     

Experimental investigation of liquid water in flow field of proton exchange membrane fuel cell by combining X-ray with EIS technologies

The flow field is a pivotal part to manage the transport of water and gas in proton exchange membrane fuel cell. However, the reported water measurement methods (e.g., X-ray and electrochemical impedance spectroscopy (EIS)) cannot give a comprehensive understanding water distribution in the flow field, resulting in challenges in optimizing the channel design and enhancing fuel cell performance. Therefore, we propose a water measurement method combining the X-ray radiography with EIS to investigate the effect of different operating conditions on the growth law and distribution of liquid water in parallel and serpentine flow fields. The attenuation coefficient of liquid water to X-ray is calibrated with constant tube-current and tube-voltage of X-ray generator. Besides, the parallel flow field with hydrophobic treatment is studied. The results show that the water accumulation of the parallel flow field is far more than the serpentine flow field, and the water content of the middle region is higher than that of other regions in the parallel flow field. Furthermore, operating conditions (cathode inlet gas flow rate, inlet gas humidity, and back pressure) have little effect on the liquid water content of the middle region in the parallel flow field. The polarization curve, EIS result, and X-ray radiography show that the performance and water drainage capacity of the hydrophobic parallel flow field are better than the normal one.

     

超高性能混凝土(UHPC)在桥面板体系中的应用2020年度研究进展

超高性能混凝土（UHPC）与正交异性钢桥面板的组合是近年来桥梁工程中新材料、新构造研究的典型范例。UHPC桥面板的刚度较大,可以有效减小桥面板中的局部变形,从而明显降低正交异性钢桥面板中的疲劳应力幅,改善其抗疲劳性能。从新构造、剪力连接件性能、组合桥面板基本力学性能、组合桥面板疲劳性能及UHPC材料与构件力学性能等几个方面对UHPC-正交异性钢桥面板组合体系的研究进展进行综述,其内容主要为2020年以来发表的工作,部分兼及更早的研究成果。     

High-performance Multicrystalline Silicon Ingots Assisted by Recycled Multicrystalline Silicon Block Tailing as Seeds

Silicon - Nowadays, casted multicrystalline silicon is the most important material in photovoltaic industry. In order to reduce the cost of silicon ingots, the recycle of silicon ingot tailings is...     

Electrolytic cell engineering and device optimization for electrosynthesis of e-biofuels via co-valorisation of bio-feedstocks and captured CO2

Utilizing CO₂ in an electro-chemical process and synthesizing value-added chemicals are amongst the few viable and scalable pathways in carbon capture and utilization technologies.CO₂ electro-reduction is also counted as one of the main options entailing less fossil fuel consumption and as a future electrical energy storage strategy.The current study aims at developing a new electrochemical platform to produce low-carbon e-biofuel through multifunctional electrosynthesis and integrated co-valorisation of biomass feedstocks with captured CO₂.In this approach,CO₂ is reduced at the cathode to produce drop-in fuels(e.g.,methanol)while value-added chemicals(e.g.,selective oxidation of alcohols,aldehydes,carboxylic acids and amines/amides)are produced at the anode.In this work,a numerical model of a continuous-flow design considering various anodic and cathodic reactions was built to determine the most techno-economically feasible configurations from the aspects of energy efficiency,environment impact and economical values.The reactor design was then optimized via parametric analysis.     

Efficient MgO-doped CaO sorbent pellets for high temperature CO2 capture

Novel MgO-doped CaO sorbent pellets were prepared by gel-casting and wet impregnation. The effect of Na⁺ and MgO on the structure and CO₂ adsorption performance of CaO sorbent pellets was elucidated. MgO-doped CaO sorbent pellets with the diameter range of 0.5-1.5 mm exhibited an excellent capacity for CO₂ adsorption and adsorption rate due to the homogeneous dispersion of MgO in the sorbent pellets and its effects on the physical structure of sorbents. The results show that MgO can effectively inhibit the sintering of CaO and retain the adsorption capacity of sorbents during multiple adsorption-desorption cycles. The presence of mesopores and macropores resulted in appreciable change of volume from CaO (16.7 cm³∙mol⁻¹) to CaCO₃ (36.9 cm³∙mol⁻¹) over repeated operation cycles. Ca2Mg1 sorbent pellets exhibited favorable CO₂ capture capacity (9.49 mmol∙g⁻¹), average adsorption rate (0.32 mmol∙g⁻¹∙min⁻¹) and conversion rate of CaO (74.83%) after 30 cycles.     

CO2体积分数对燃煤细颗粒物在水汽环境中凝结长大的影响

为研究燃煤烟气中CO₂体积分数对细颗粒物在水汽环境中凝结长大效果的影响,建立了计算模型并搭建了实验平台,分别从理论计算和实验研究两方面探讨了CO₂体积分数对细颗粒物凝结长大效果的影响。结果表明:随着CO₂体积分数升高,混合烟气的热、质扩散系数均降低,生长管内平均过饱和度增加,细颗粒物长大效果明显;管壁温度越高,随着CO₂体积分数的提高,细颗粒物粒径越大。     

壁挂式空调新风模块气动性能优化研究

随着人们对健康的室内家居环境要求提高,当下室内新风换气量无法有效地改善室内空气品质.为了保证室内有效的通风换气,提供充足的新风量,提高产品竞争力,以某壁挂式新风空调器为研究对象,通过优化其内部多翼离心风机模块中各部件气流风阻,从进风管、进气腔、新风滤网等组件进行低阻抗气流改善设计.经过手板验证后,在相同转速下新风量提升约33％;同时在满足充足新风量的情况下,改善了内部气流均匀性,保证了同转速相当的噪音品质.     

壁挂式空调新风模块气动性能优化研究

随着人们对健康的室内家居环境要求提高,当下室内新风换气量无法有效地改善室内空气品质.为了保证室内有效的通风换气,提供充足的新风量,提高产品竞争力,以某壁挂式新风空调器为研究对象,通过优化其内部多翼离心风机模块中各部件气流风阻,从进风管、进气腔、新风滤网等组件进行低阻抗气流改善设计.经过手板验证后,在相同转速下新风量提升约33％;同时在满足充足新风量的情况下,改善了内部气流均匀性,保证了同转速相当的噪音品质.