Parametric study of the electrical to thermal power conversion in an inductively coupledrf plasma torch

An inductively coupled (ic) radio-frequency (rf) stabilized argon plasma was generated in a quartz tube using a 7 MHzrf generator. The electrical and thermal powers were measured and the efficiency of energy conversion was computed. The results indicate that for a constant power input, there is an optimum argon flow rate for which maximum energy conversion efficiency occurs.     

Copper coating on carbon fibres and their composites with aluminium matrix

A uniform and continuous coating of copper was given to carbon fibres by cementation or electroless techniques. In both cases, when coating thicknesses were less than 0.2 m, copper deposition was discontinuous over the fibres, and above 0.2 m, coatings were continuous. In electroless coating, about 75% of the continuously coated fibres had a coating thickness range 0.2–0.5 m and above this showed isolated dendrite deposits of copper. In the cementation process, about 75% of the continuously coated fibres had a coating thickness range 0.2–0.6 m, and above this thickness, fine crystallite-type copper deposition was found over smoothly coated copper. The ultimate tensile strength of continuously electroless-coated fibres were nearer to the uncoated fibres, suggesting defect-free coating, while fibres coated by the cementation process exhibited lower ultimate tensile strength values. The tensile fracture of both electroless- and cementation-coated fibres showed delamination of the coating, suggesting poor bonding between coating and the fibre. In composites, prepared by dispersing the coated chopped fibres in a pure aluminium matrix, uniform and random distribution of the fibres were observed without appreciable fibre-metal interaction. The CuAl₂ intermetallics were largely found in the matrix and only very small amounts were observed at fibre/matrix interfaces. Additions of about 2 wt% Mg to the matrix prior to the fibre dispersion did not appreciably change the distribution pattern of the fibres, but in addition to CuAl₂ phase, Mg₂Si phases were observed in the matrix as well as at the interface.     

亚磷酸工业生产方法的研究

本文详细介绍了亚磷酸的合成方法和工艺流程,其中还介绍了优级亚磷酸中杂质的去除方法.     

石墨防爆片静态变形及应力分析

本文旨在通过对石墨防爆片的变形、应力分布及爆破压力的试验研究,探讨以石墨电极为原材料加工石墨防爆片的可行性。文中运用有限单元法及薄板理论对该防爆破片的应力分布做了初步分析,并以电测和爆破试验验证了以薄板理论为基础的爆破压力计算公式,可供进一步研究时参考。     

Enhancing decisions with life cycle analysis for risk management

Although corporate financial distress is an infrequent occurrence, it has an extremely debilitating effect on the stability of a firm when it does occur. For this reason, an accurate risk assessment mechanism is needed in numerous industry sectors, particularly in financial institutions and banking. Based on corporation life cycle theory and risk management, this study develops a risk pre-warning model, namely the RSVMDT model, to eliminate serious financial punching and to examine the effectiveness of transparency and the full disclosure index (TFDI) during each life cycle stage. The RSVMDT model includes three techniques: random forest (RF), support vector machines (SVMs), and decision trees (DTs). The RF is used to determine the essential attributes of firms and therefore decrease the computational complexity of financial analysis and improve the classification accuracy. The SVM is employed as a classifier to identify corporations in financial distress. Finally, the DT is utilized as a rule generator that allows decision makers to adjust the financial structures of firms at specific life cycle stages. Together, these three techniques can increase the probability of corporate survival in a highly competitive environment. Additionally, the study further evaluates the importance of the TFDI during a turbulent economy. The public sectors can benefit from this evaluation by formulating future policies based on the rules derived from the developed RSVMDT model.     

Morphology of craters at hypervelocity impact in isotropic composites with inclusions

Results of a study of hypervelocity impact in model disperse-reinforced composites with an epoxy or aluminum matrix with metallic (Al and Pb) or ceramic (SiO₂) inclusions are reported. The goal of the present study is to find materials that possess a higher resistance to penetration of a high-velocity projectile compared with materials of separate components. This resistance is characterized by the ratio of the depth of a crater in a sufficiently thick target to the diameter of a spherical projectile. For two composites studied, we show that in impact of a steel particle with a velocity ranging from3 to11km/sec, the crater depth is approximately one projectile diameter smaller than that for lead or aluminum targets. Lavrent’ev Institute of Hydrodynamics, Siberian Division, Russian Academy of Sciences, Novosibirsk 630090. Translated from Fizika Goreniya i Vzryva, Vol. 33, No. 3, pp. 139–151, May–June, 1997.     

A group decision classifier with particle swarm optimization and decision tree for analyzing achievements in mathematics and science

Group decision making is a multi-criteria decision-making method applied in many fields. However, the use of group decision-making techniques in multi-class classification problems and rule generation is not explored widely. This investigation developed a group decision classifier with particle swarm optimization (PSO) and decision tree (GDCPSODT) for analyzing students’ mathematic and scientific achievements, which is a multi-class classification problem involving rule generation. The PSO technique is employed to determine weights of condition attributes; the decision tree is used to generate rules. To demonstrate the performance of the developed GDCPSODT model, other classifiers such as the Bayesian classifier, the k-nearest neighbor (KNN) classifier, the back propagation neural networks classifier with particle swarm optimization (BPNNPSO) and the radial basis function neural networks classifier with PSO (RBFNNPSO) are used to cope with the same data. Experimental results indicated the testing accuracy of GDCPSODT is higher than the other four classifiers. Furthermore, rules and some improvement directions of academic achievements are provided by the GDCPSODT model. Therefore, the GDCPSODT model is a feasible and promising alternative for analyzing student-related mathematic and scientific achievement data.     

High-Resolution Electron Microscopy Observations of Stacking Faults in β-SiC

Structural images of the stacking faults in β-SiC were obtained with a high-resolution electron microscope. Stacking faults initially present in β-SiC powder particles were eliminated as grain growth proceeded at elevated temperatures.     

Stearic acid unlike shorter-chain saturated fatty acids is poorly utilized for triacylglycerol synthesis and β-oxidation in cultured rat hepatocytes

Utilization of stearate as compared to various saturated fatty acids for cholesterol and lipid synthesis and β-oxidation was determined in primary culture of rat hepatocytes. At 0.5 mmol/L in the medium, stearate (18:0) adequately solubilized by albumin was less inhibitory to cholesterol synthesis from [2-¹⁴C] acetate than myristate (14:0) and palmitate (16:0) (68% vs. 91 and 88% inhibition, respectively). The rate of incorporation into cholesterol from [1-¹⁴C] stearate (3.0±0.6 nmol/mg protein/4 h) was 37-, 1.8-, and 7.8-fold of that from myristate, palmitate, and oleate, respectively. Conversely, the rate of [1-¹⁴C] stearate incorporation into total glycerolipids was 88–90% lower than that of labeled palmitate, myristate, and oleate. The rate of [1-¹⁴C] stearate incorporation into triacylglycerol (3.6±0.4 nmol/mg protein/4 h) was 6–8% of that from myristate, palmitate, oleate, and linoleate. The rate of stearate incorporation into phospholipids was the lowest among tested fatty acids, whereas the rate of mono- and diacylglycerol synthesis was the highest with stearate treatment. The rate of β-oxidation as measured by CO₂ and acid soluble metabolite production was also the lowest with [1-¹⁴C] stearate treatment at 22.7 nmol/mg protein/4 h, which was 35–40% of those from other [1-¹⁴C] labeled fatty acids. A greater proportion of stearate than other fatty acids taken up by the hepatocytes remained free and was not metabolized. Clearly, stearate as compared to shorter-chain saturated fatty acids was less efficiently oxidized and esterified to triacylglycerol in cultured rat hepatocytes.     

短纤维-橡胶复合材料在输送带中的应用

介绍了以不连续的聚酯短纤维群为骨架材料，ＮＲ／ＳＢＲ为基质胶的定向短纤维橡胶复合材料（ＯＳＦＲＣ）在输送带中的应用。结果表明，ＯＳＦＲＣ输送带与棉帆布芯输送带相比，使用寿命提高１倍，带体综合物理性能好，在应力作用下不脱层，无受潮霉烂现象，输送平稳且不打滑，适宜在苛刻条件下使用。