In situ modification of cyclohexanone formaldehyde resin with boric acid for high‐performance applications

A boron‐containing cyclohexanone formaldehyde resin (BCFR) was synthesized from cyclohexanone, formaldehyde, and boric acid. The effects of the boric acid concentration, solubility, molecular weight, and thermal properties on the product were investigated. Characterization of the BCFRs was done by NMR spectroscopy, gel permeation chromatography, and Fourier transform infrared–attenuated total reflectance spectroscopy. The thermal properties of the samples were determined with differential scanning calorimetry and thermogravimetric analysis. The study results demonstrate that the resin had higher heat‐resistance properties than the commonly modified cyclohexanone formaldehyde resin. The obtained samples were also characterized morphologically by scanning electron microscopy. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Aqueous solubility and alkaline hydrolysis of the novel high explosive hexanitrohexaazaisowurtzitane (CL-20)

The recently developed polycyclic nitramine CL-20 is considered as a possible replacement for the monocyclic nitramines RDX and HMX. The present study reports aqueous solubility data for CL-20, as well as the kinetic parameters for its alkaline hydrolysis with sodium hydroxide below and above its solubility limits. Aqueous solubility of CL-20 was measured in the temperature range of 4–69 °C and the data were fitted to a generalized solubility model. Alkaline hydrolysis experiments were conducted at 15, 20, 30 and 40 °C, with hydroxide concentrations ranging from 0.25 to 300 mM. Like RDX and HMX, alkaline hydrolysis of CL-20 follows second-order kinetics. CL-20 alkaline hydrolysis was found to proceed at a significantly faster rate than RDX. The temperature dependency of the second-order rate constants was evaluated using the Arrhenius model. The activation energy for CL-20 was found to be within close range of the activation energies reported for RDX and HMX.     

Development and properties of advanced composites based on cork and nanometric silicon carbide-filled phenolic resin

This paper presents the obtaining of advanced materials based on cork powder as reinforcement and phenolic resin (PR) with silicon carbide (nSiC) nanofiller as matrix with potential applications in aerospace industry. Three formulations were obtained: one control sample PR/cork with no nanofiller, two nanofilled samples with 1 and 2 wt% nSiC loadings into the resin. The materials were tested by flexural and compressive mechanical tests to determine their strength and stiffness, to determine their friction coefficient by tribological tests, to determine their thermal decomposition behaviour by TG-DSC analysis and to evaluate their thermal behaviour by thermal shock tests when subjected to extreme temperature directly from room temperature. The material structure was analysed by SEM visualizing the fracture cross-section after mechanical testing. The test results illustrate that silicon carbide nanoparticles improve flexural and compressive strength, but also stiffness and friction coefficient, delay thermal decomposition onset and improve thermal shock resistance. All these sustain the PR/nSiC/cork materials as potential advanced materials candidates for thermal protection applications.     

Electrical and photovoltaic properties of Cr/Si Schottky diodes

The electrical properties of the Cr/p-Si(111) and Cr/n-Si(100) junctions were investigated through capacitance–voltage and current–voltage measurements, performed under dark and light conditions at room temperature. Diode parameters of Cr/Si Schottky diode like ideality factor and barrier height were obtained and variations of them were monitored as a function of temperatures. Also, an attempt to explore the governing current flow mechanism was tried. The reverse biased I–V measurement under illumination exhibited anomalous behavior as well as high photosensitivity. The former was explained in terms of minority carrier injection phenomenon. The photovoltaic parameters, such as open circuit voltage and short circuit current were obtained as 370 mV and I_sc = 44.5 μA, respectively.     

Radical Innovation with Limited Resources in High‐Turbulent Markets: The Role of Lean Innovation Capability

How do firms radically innovate with limited resources in high‐turbulent environments? We examine this question via in‐depth comparative case studies of ten start‐up firms in diverse high‐turbulent markets. Evidence shows that the perceived value of resources depends on two contextual factors: market type and business model type. More interestingly, firms that see resource limitation as an enabler rather than an inhibitor seem to have a distinct capability that we call lean innovation capability. It is defined as a distinct capability that reflects a firm's ability to experiment with ideas that meet core customer needs by constantly iterating the initial offering with the purpose of validating the learning through continuous market feedback to achieve sustainable performance. The three main qualities of these companies are (1) adopting abductive reasoning, (2) embracing a validity‐driven approach, and (3) operating in the overlapping spaces of fundamental customer needs, business viability and technological feasibility. Lean firms adopt design‐thinking methodology and act like bricoleurs, such as make‐do by applying combinations of the available resources through rapid prototyping to new problems and opportunities in an experimental way. Briefly, lean innovation capability enables firms to manage limited resources by reconfiguring and reallocating existing resources, and, thereby, helps empower resource‐limited radical innovation.     

Detection of porcine DNA in gelatine and gelatine-containing processed food products-Halal/Kosher authentication

A commercially available real-time PCR, based on a multi-copy target cytochrome b (cyt b) using porcine specific primers, has been validated for the Halal/Kosher authentication of gelatine. Extraction and purification of DNA from gelatine were successfully achieved using the SureFood® PREP Animal system, and real-time PCR was carried out using SureFood® Animal ID Pork Sens kit. The minimum level of adulteration that could be detected was 1.0% w/w for marshmallows and gum drops. A small survey was undertaken of processed food products such as gum drops, marshmallows and Turkish delight, believed to contain gelatine. Of fourteen food products from Germany, two samples were found to contain porcine gelatine, whereas of twenty-nine samples from Turkey twenty-eight were negative. However, one product from Turkey contained porcine DNA and thus was not Halal, and neither was the use of porcine gelatine indicated on the product label.     

Heavy metal levels in leafy vegetables and some selected fruits

The aim of this study was to determine the levels of Cu, Zn, Fe, Pb and Cd in various fruits (tomato, cherry, grape, strawberry) and vegetables (parsley, onion, lettuce, garlic, nettle, peppermint, rocket, spinach, dill, broad bean, chard, purslane, grapevine leaves) grown in Manisa region. Flame and Graphite Furnace Atomic absorption spectrometry was used to estimate and evaluate the levels of these metals. Detected levels ranged from 0.56 to 329.7, 0.01 to 5.67, 0.26 to 30.68, 0.001 to 0.97 and 0 to 0.06 μg/g for Fe, Cu, Zn, Pb and Cd, respectively. While the highest mean levels of Cu and Zn were detected in grapevine leaves, the lowest mean levels of Fe and Pb were detected in nettle. Cd was not detected in most of the fruits and vegetables studied. The estimated daily intakes of Cu, Zn, Fe, Pb and Cd through fruits and vegetables were found to be below the maximum tolerable levels recommended by FAO/WHO. The element concentrations of fruits and vegetables analyzed in this study were within safety baseline levels for human consumption.     

Dry reforming of methane has no future for hydrogen production: Comparison with steam reforming at high pressure in standard and membrane reactors

The methane dry-reforming and steam reforming reactions were studied as a function of pressure (1–20 atm) at 973 K in conventional packed-bed reactors and a membrane reactors. For the dry-reforming reaction in a conventional reactor the production yield of hydrogen rose and then decreased with increasing pressure as a result of the reverse water-gas shift reaction in which the hydrogen reacted with the reactant CO₂ to produce water. For the steam reforming reaction the production yield of hydrogen kept increasing with pressure because the forward water-gas shift reaction produced additional hydrogen by the reaction of CO with water. In the membrane reactors the methane conversion and the hydrogen production yields were higher for both the dry-reforming and steam reforming reactions, but for the dry reforming at high pressure half of the hydrogen was transformed into water. Thus, the dry-reforming reaction is not practical for producing hydrogen.     

Properties of blended cements with thermally activated kaolin

Kaolin, one of the materials of major importance for the ceramic and paper industry, is also used in the construction industry as a raw material for the production of white cement clinker and, in the form of metakaolin, as an artificial pozzolanic additive for concrete. Metakaolin is a vital component of high-performance and architectural concrete; however, its application in regular concrete is very limited due to relatively high production costs. This report evaluates the performance of a low-cost metakaolin-based additive called thermally activated kaolin (TAK), in cement. Due to its pozzolanic properties and the densification of cement matrix, the application of TAK provides a 15% improvement of the compressive strength. It was shown that TAK of optimal quality can be manufactured by the thermal treatment of raw kaolin with 74% of kaolinite at 750 °C without the intermediate beneficiation stage. The application of a developed approach can significantly reduce production expenditures and make the application of such an additive feasible even in regular-grade cement and concrete.