Programmable group-delay module using binary polarization switching

We demonstrate the first programmable group-delay module based on polarization switching. With a unique binary tuning mechanism, the device can generate any differential group delay value from -45 to +45 ps with a resolution of 1.40 ps, or any true-time-delay value from 0 to 45 ps with a resolution of 0.7 ps. The delay varying speeds for both applications are under 1 ms and can be as fast as 0.1 ms. We evaluate both the dynamic and static performances of the device while paying special attention to its dynamic figures of merit for polarization-mode dispersion emulation and compensation applications. Our experiment shows that the device exhibits a negligible transient-effect induced power penalty (<0.2 dB) in a 10-Gb/s nonreturn-to-zero system.     

STUDY ON PHASE PERCEPTION IN SPEECH

The perceptual effect of the phase information in speech has been studied by auditory subjective tests. On the condition that the phase spectrum in speech is changed while amplitude spectrum is unchanged, the tests show that: (1) If the envelop of the reconstructed speech signal is unchanged, there is indistinctive auditory perception between the original speech and the reconstructed speech; (2) The auditory perception effect of the reconstructed speech mainly lies on the amplitude of the derivative of the additive phase; (3) td is the maximum relative time shift between different frequency components of the reconstructed speech signal. The speech quality is excellent while td <10ms; good while 10ms< td <20ms; common while 20ms< td <35ms, and poor while td >35ms.     

Positively Thermo‐Sensitive Monodisperse Core–Shell Microspheres

In this paper, we report on a novel family of monodisperse thermo‐sensitive core–shell hydrogel microspheres that is featured with high monodispersity and positively thermo‐responsive volume phase transition characteristics with tunable swelling kinetics, i.e., the particle swelling is induced by an increase rather than a decrease in temperature. The microspheres were fabricated in a three‐step process. In the first step, monodisperse poly(acrylamide‐co‐styrene) seeds were prepared by emulsifier‐free emulsion polymerization. In the second step, poly(acrylamide) or poly[acrylamide‐co‐(butyl methacrylate)] shells were fabricated on the microsphere seeds by free radical polymerization. In the third step, the core–shell microspheres with poly‐ (acrylamide)/poly(acrylic acid) based interpenetrating polymer network (IPN) shells were finished by a method of sequential IPN synthesis. The proposed monodisperse core–shell microspheres provide a new mode of the phase transition behavior for thermo‐sensitive “smart” or “intelligent” monodisperse micro‐actuators that is highly attractive for targeting drug delivery systems, chemical separations, sensors, and so on.     

一种快速CRC 算法①的硬件实现方法

介绍了CRC校验算法的硬件电路实现方法。CRC校验广泛应用于通信、存储系统，在串行CRC实现的基础上，对电路结构提出了改进的方案，并实现了CRC的并行计算，由此进一步可以适用于任意位数据宽度的数据输入情况。     

离子束混合工艺对材料抗蚀性能的影响

本文介绍了离子束混合工艺方法。与直接注入相比较,离子束混合所使用的设备造价低1/4—1/2,而生产效率可提高1—2个数量级,因而使生产成本大幅度降低,这无疑对离子束工艺的实际应用将产生巨大的促进作用。 通过对轴承材料(GCr15和Cr4Mo4V)经Cr、N、Ta不同元素的混合处理后,在0.5M H_2SO_4和0.1M NaCl的缓冲溶液中的阳极极化曲线表明经混合处理后的两种材料试样,其抗蚀能力和抗点蚀能力均大大提高,这与直接注入的试样效果是一致的。 通过俄歇谱仪和透射电镜的分析结果表明混合是成功的,且在一定的条件下,形成非晶组织。 本文的结论是,无论是离子的直接注入还是离子束混合,对提高轴承材料的抗腐蚀性能都是有效的方法,特别是离子束混合技术具有更大的应用前景。     

低发射率材料红外法向发射率谱测量方法的研究

采用热管技术研制了材料发射率谱的专用测量附件;利用双温测量技术,在P-E983型红外分光光度计及3600型数据站上进行了较低温度下低发射率材料红外法向发射率谱测量方法的研究.实测了几种材料的发射率谱;讨论了影响测量误差的诸因素.     

Effect of Preparation Methods and Condition of Precursors on the Phase Composition of Yttria-Stabilized Zirconia Powders

An yttria-stabilized zirconia powder, free of monoclinic phase, may be prepared by an oxalate method in an ethanol solution at strong acidity. This study demonstrates that the control of pH in the preparation of precursors has a significant effect on the ability of precursors to crystallize and hence plays an important role in determining the formation and fraction of various crystalline phases in the resulting yttria-stabilized zirconia powder. With the increase of pH, a precursor with a certain crystalline form may be transformed into an amorphous precursor, and a monoclinic phase appers in the phase composition of the resulting powder. The results of XRD analysis and Raman spectroscopy are discussed.     

Probabilistic analysis of uncertainties in seismic hazard assessment

Sources and current methods of analysis of uncertainty from randomness, fuzziness and ignorance or incomplete knowledge in seismic hazard assessment problem are briefly discussed at beginning; understandings of the authors are then presented in the following order. All three types of uncertainty come from incomplete knowledge. Probabilistic method can be applied to all of them, objective probability for random factors and subjective probability for the other two types of uncertain factors. Discrete subjective probability mass functions for incomplete and fuzzy factors can be obtained from logic-tree and membership functions respectively. Fractile curves may be used to show the scattering of any uncertainty factor, but a unified probabilistic treatment may be applied to any combination of all three types of uncertainty.