Estimation of access failure probability in D2D underlaid cellular networks

Device-to-Device (D2D) communication can reduce the mobile devices' energy consumption and increase the spectral efficiency in D2D underlaid cellular networks. However, D2D users will interfere with co-channel cellular users, which can lead to cellular communication access failures. There are two reasons for cellular communication access failures: (1)D2D interference and (2)insufficient spectrum resources. To address the absence of research on the performance of cellular services' access in D2D underlaid cellular networks, this paper defines the new services' access failure probability and handoff services' access failure probability to evaluate the effect of both D2D interference and limited resources on cellular communication access. Based on the stochastic geometry and stochastic process, a random network model is presented to estimate the access failure probabilities, which can provide guidelines for network design to ensure cellular services' access. The accuracy of the estimated access failure probability is validated through extensive simulations.     

综合物探方法在地面塌陷勘察中的应用

地面塌陷引发的地质灾害对国民经济建设的危害重大。目前,探测塌陷区的物探方法种类繁多,但没有一种方法能全面解决各种问题,需综合运用多种方法。以安徽某地面塌陷研究对象,运用高密度电法和瞬变电磁法探测重点塌陷区域,简要介绍了高密度电法、瞬变电磁法的工作原理、方法特点、数据采集和数据处理,并对数据进行了解释,通过此次探测研究,取得了明显的成果。结果表明,两种方法相互验证,相互参照,相互补充,查明了塌陷区及其附近的覆盖层厚度、地质构造和地层岩性变化,为后期地面塌陷灾害治理提供了科学依据。     

Degradability and biocompatibility of bioglass/poly(amino acid) composites with different surface bioactivity as bone repair materials

Bioglass (BG) possesses excellent bioactivity and has been widely used in the manufacture of biomaterials. In this study, a composite with different surface bioactivity was fabricated via in situ melting polymerization by incorporating BG and poly(amino acid) (PAA) at a suitable ratio. The structure of the composite was characterized by Fourier transform infrared spectroscopy and XRD. The compressive strength of the BG/PAA composites was 139 MPa (BG:PAA = 30:70). The BG/PAA composites were degradable, and higher BG in composite showed higher weight loss after 4 weeks of incubation in simulated body fluid. In addition, the BG/PAA composite maintained adequate residual compressive strength during the degradation period. The SEM results showed the differences in surface bioactivities of the composites directly, and 30BG/PAA composite showed thicker apatite layer and higher Ca/p than 15BG/PAA. in vitro MG-63 cell culture experiments showed that the composite was noncytotoxic and thus allows cells to adhere, proliferate, and differentiate. This indicates that the composite has good biocompatibility. The implantations in the bone defects of rabbits for 4 and 12 weeks were studied. The composites had good biocompatibility and were capable of guiding new bone formation without causing any inflammation. The composite may be successfully used in the development of bone implants.     

Preparation and characterization of TiO2 photoelectrode codoped with aluminum and boron and its application in dye-sensitized solar cell

Nanocrystalline titania films codoped with aluminum and boron were prepared by cathodic vacuum arc deposition. In the process, titanium alloy target was used under an O2/Ar atmosphere, and sensitization of films were carried out by natural dye-sensitized complex in anhydrous ethanol. The structure, surface morphology and UV-vis spectra of titania films codoped were measured by X-ray diffraction analysis, scanning electron microscopy and ultraviolet-visible spectrometer. Theas-deposited films are found to be amorphous. The films annealed were examinedto be of anatase structure with orientation along the (101) planes, the averagecrystal size is in the range between 41 and 45 nm. SEM results show that thereare some pores in the codoped titania films, the optical properties of the dye-sensitized films were also measured which reveals that the spectral responses of films shift to the visible region. Under simulated sunlight illumination, the overall energy conversion efficiency of dye-sensitized nanocrystalline solar cell is 0.9%.     

Einfluß des totvolumens auf die Al2O3-CVD-Abscheidung

The influence of the free gas volume around the substrate on the chemical vapor deposition of Al₂O₃ layers in the AlCl₃/H₂/CO₂ system at different pressures and temperatures has been studied. Through the water gas reaction which occurs homogeneously in the gas phase, the Al₂O₃ growth rate increases with increasing free gas volume until a certain volume is reached, after which it remains constant. For this ‘critical free gas volume’ a theoretical characteristic dimension L_max is introduced. It is defined as the normal distance from a substrate surface, at which the water molecules formed from the CO₂ + H₂ in the gas phase can no longer reach the substrate surface in the time available. The dependencies of L_max on pressure, temperature and gas flow rate deduced through this theoretical consideration show agreement with the experimental results.

Zusammenfassung

Der Einfluß des die Substrate umgebenden Totvolumens auf die Al₂O₃-CVD-Abscheidung im System AlCl₃/H₂/CO₂ wurde systematisch bei verschiedenen Drücken und Temperaturen untersucht. Durch die homogen in der Gasphase ablaufende Wassergasreaktion nimmt in allen Fällen die Abscheidungs-geschwindigkeit mit vergrößerten Totvolumen zuerst zu, bleibt aber ab einer bestimmten Totvolumensgröße konstant. Für diese “kritische Totvolumensgröße” wird die theoretische Kenngröße L_max eingeführt. Diese Größe ist als Normalabstand zur Substratoberfläche definiert, bei dem das in der Gasphase aus CO₂ + H₂ gebildeten Wasser in der zur Verfügung stehenden Zeit die mit AlCl₃ belegte Oberfläche der Substrate nicht mehr erreichen kann. Die aus dieser theoretischen Überlegung abgeleiteten Voraussagen über die Abhängigkeit des L_max von Druck, Temperatur und Gasströmungsgeschwindigkeit zeigten Übereinstimmung mit den Versuchsergebnissen.     

Influence of electroplating conditions on magnetic properties of Fe-36wt.% Ni alloy film

A Fe-Ni soft magnetic film was prepared in sulphate solution by electroplating. The influences of the molar ratio of n [Fe2+ ]/ n [Ni2+ ], current density, bath temperature, pH and L-ascorbic acid concentration on magnetic properties of Fe-Ni alloy film were investigated. The results show that the saturated flux density(BS) of the film increases initially and decreases after it reaches the specific value with the increase of n [Fe2+ ]/ n [Ni2+ ] molar ratio, current density, bath temperature and pH. However, the relationship between L-ascorbic acid concentration and B S keeps linear. It is observed that the coercive force( Hc) is enhanced with the increase of n [Fe2+ ]/ n [Ni2+ ] molar ratio, current density and pH. By comparison, when the bath temperature increases, Hc always decreases. With the increase of L-ascorbic acid concentration, the coercive force increases initially and then decreases.     

Measurement of drill point geometry by using laser sensor

Accurate measurement for the drill geometry is essential to drill design and reconditioning. In recent years, a number of non-contact drill measuring instruments, using CCD camera are reported in the literature. But these systems are not suitable in measuring three-dimensional surface, especially the concave ones. As an effectual remedy, a geometry measurement instrument using laser sensor is developed. This paper describes its configuration and calibration. In addition, the measurement method for a drill flute is detailed. Validity of the system and proposed method are demonstrated by an example. The deviations of the data measured from that inspected by using a microscope are no more than 0.0061 mm.     

Some Results for Pythagorean Fuzzy Sets

Pythagorean fuzzy sets (PFSs), originally proposed by Yager (Yager, Abbasov. Int J Intell Syst 2013;28:436–452), are a new tool to deal with vagueness considering the membership grades are pairs satisfying the condition . As a generalized set, PFSs have close relationship with intuitionistic fuzzy sets (IFSs). PFSs can be reduced to IFSs satisfying the condition . However, the related operations of PFSs do not take different conditions into consideration. To better understand PFSs, we propose two operations: division and subtraction, and discuss their properties in detail. Then, based on Pythagorean fuzzy aggregation operators, their properties such as boundedness, idempotency, and monotonicity are investigated. Later, we develop a Pythagorean fuzzy superiority and inferiority ranking method to solve uncertainty multiple attribute group decision making problem. Finally, an illustrative example for evaluating the Internet stocks performance is given to verify the developed approach and to demonstrate its practicality and effectiveness.     

栅元有效共振积分的CUDA算法设计与实现

核反应堆中需要实时精确地计算堆芯和增殖材料的有效共振积分或群截面来实现反应堆的安全控制。整个计算过程因为涉及大量的积分运算和庞大的核素截面数据,采用常规的计算方法,计算时耗相当大。基于统一计算设备架构(CUDA)平台,利用图形处理器(GPU)的计算能力,对整个计算过程进行并行化分解,多线程同时运算,大幅度提升计算速度,降低时耗。实验结果表明,在GPU上并行计算所得结果与原始数据没有明显差异,且加速效果显著。     

Multifocus image fusion method of Ripplet transform based on cycle spinning

The curvelet transform can represent images at both different scales and different directions. Ripplet transform, as a higher dimensional generalization of the curvelet transform, provides a new tight frame with sparse representation for images with discontinuities along C² curves. However, the ripplet transform is lack of translation invariance, which causes the pseudo-Gibbs phenomenon on the edges of image. In this paper, the cycle spinning method is adopted to suppress the pseudo-Gibbs phenomena in the multifocus image fusion. On the other hand, a modified sum-modified-laplacian rule based on the threshold is proposed to make the decision map to select the ripplet coefficient. Several experiments are executed to compare the presented approach with other methods based on the curvelet, sharp frequency localized contourlet transform and shearlet transform. The experiments demonstrate that the presented fusion algorithm outperforms these image fusion works.