Distributed dynamic load balancing with applications in radio access networks

Managing and balancing load in distributed systems remains a challenging problem in resource management, especially in networked systems where scalability concerns favour distributed and dynamic approaches. Distributed methods can also integrate well with centralised control paradigms if they provide high‐level usage statistics and control interfaces for supporting and deploying centralised policy decisions. We present a general method to compute target values for an arbitrary metric on the local system state and show that autonomous rebalancing actions based on the target values can be used to reliably and robustly improve the balance for metrics based on probabilistic risk estimates. To balance the trade‐off between balancing efficiency and cost, we introduce 2 methods of deriving rebalancing actuations from the computed targets that depend on parameters that directly affects the trade‐off. This enables policy level control of the distributed mechanism based on collected metric statistics from network elements. Evaluation results based on cellular radio access network simulations indicate that load balancing based on probabilistic overload risk metrics provides more robust balancing solutions with fewer handovers compared to a baseline setting based on average load.     

New CAMAC based data acquisition and beam control system for Lund nuclear microprobe

A new CAMAC based data acquisition system has been installed at the Lund Nuclear Microprobe facility. This paper reports on the development and present status of the data acquisition system. The system is a true multiparameter CAMAC based system with fast Fera bus readout and in crate memory buffer. The user interface is based on Sparrow Kmax software for a Power Macintosh platform. The system read out and tag the event data with position on-line, which make fast on-line monitoring of spectra or element maps possible.Simultaneously, all data can be saved event by event for off-line analysis. The beam scanning part is software controlled through a timed D/A converter, this allows fast scanning of the beam. With a CCD-camera and video card the area to be analysed could be defined directly from the image, and the sample position can be moved. Any kind of irregular scan patterns could be defined.     

Spontaneous Desorption time-of-flight Mass Spectrometry (SDMS): Time correlated emission of electrons and negative ions in a constant electric field

A very simple time of flight mass spectrometer has been used to measure mass spectra for the negative ions of organic compounds in the mass range up to 3000 u. Desorbed ions were obtained by applying a constant negative voltage to a flat metallic surface, coated with a few micrograms of organic material. We show that electrons and negative ions are emitted simultaneously from the same point on the surface. Mass spectra obtained by this technique are compared to mass spectra for the same compounds, obtained with ²⁵²Cf fission fragment ionization.     

Development of an Efficient Acid Digestion Procedure Utilizing High-Pressure Asher Technique for the Determination of Iodine and Metallic Elements in Milk Powder

An effective wet digestion procedure for the determination of total iodine contents in milk powder samples was developed utilizing a high-pressure asher technique. The optimized method based on a two-stage digestion procedure. In the first stage, 500 mg samples were digested at 300 °C for 2 h using 15.2 mol L^?1 HNO₃ (5 mL) and 30 % H₂O₂ (3 mL). After the first digestion stage, digestion vessels were allowed to cool down and 1.2 mL of 20 % (w/v) Na₂S₂O₈ solution was added as an additional oxidizing agent to the samples. After that, the vessels were closed, and they were heated at 100 °C for 30 min, resulting in clear and colorless sample solutions. Iodine concentrations in the digested samples were measured with inductively coupled plasma mass spectrometry. The accuracy of the optimized method was confirmed by analyzing milk powder reference material (BCR-151, milk powder). The obtained value for iodine (5.29?±?0.37 mg kg^?1, n?=?6) was in good agreement with the certified value (5.35?±?0.14 mg kg^?1). Furthermore, the results obtained for reference material showed that the developed method can be applied also for the determination of other elements, e.g., copper, iron, and lead in the digested milk powder samples.     

Inhibition of Fungal Growth on Wheat and Rye Bread by Modified Atmosphere Packaging and Active Packaging Using Volatile Mustard Essential Oil

ABSTRACT: Wheat and rye bread artificially inoculated with molds were packed in modified atmospheres of 0%, 50%, 75%, or 100% CO₂ balanced with N₂, and 3 levels of residual O₂, 1%, 0.03%, or <0.01%/O₂-absorber, and stored for 30 to 35 d. Modified atmosphere packaging (MAP) was quantitatively more effective for rye bread because fewer mold species grew at elevated CO₂. However, the major rye bread contaminant, Penicillium roqueforti , was the overall most CO₂-resistant mold and only the use of O₂-absorber could prevent growth of this species. On wheat bread, the most CO₂-tolerant mold was Penicillium commune , growing in 99% CO₂ (with high residual O₂), and Aspergillus flavus was the mold species that grew at lowest O₂ in 75% CO₂ treatment. The spoilage yeast/"chalk mold" Endomyces fibuliger was less affected by the different O₂ levels than the true filamentous molds, and none of the tested MAP treatments could prevent growth, but lag-phase was increased with O₂-absorber on wheat bread and decreased with 1% residual O₂ on rye bread. Experiments with volatile mustard oil showed that A. flavus and Eurotium repens were the most mustard oil-resistant species on wheat and rye bread, respectively. A combination strategy with MAP and mustard oil proved most optimal, and total inhibition was achieved with 2 μL mustard oil/rye bread slice and between 2 and 3 μL/wheat bread. Results indicated that the nature and surface area of the product influences effectiveness of active packaging with mustard oil.     

Atmospheric transport of polybrominated diphenyl ethers and polychlorinated biphenyls to the Baltic Sea

The atmospheric transport of polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) was compared by measuring concentrations in air and deposition on an island located in the central basin of the Baltic Sea. Median sigmaPBDE and sigmaPCB concentrations (gaseous + particle) were 8.6 and 7.4 pg m(-3), respectively. Airborne PCBs were mainly found in the gaseous phase, while most of the PBDEs were detected on particles, which agrees with predicted particle/gas distributions. SigmaPBDE levels were dominated by the decabrominated BDE209 followed bythe tetrabrominated BDE47 and pentabrominated BDE99. BDE209 is a marker for the environmental distribution of the commercial deca-BDE formulation (>99.5% BDE209), whereas BDE47 and BDE99 are markers for the commercial penta-BDE mixture. General correlations between PBDEs and PCBs suggested similarities in sources and transport mechanism, while more detailed examination of the data identified notable behaviors and exceptions. Differences in regression slopes among tetra-, penta-, and decabrominated PBDEs may reflect different transport processes and the change in usage pattern. Tetra- and pentabrominated PBDEs may originate from secondary sources such as air surface exchange in a manner similar to that of the PCBs, while the deca-BDE209 formulation still has primary sources. The tribrominated BDE17 was also detected and is proposed to be a breakdown product due to atmospheric debromination processes. PBDEs had higher washout ratios than PCBs, explaining their higher concentrations compared to PCBs in precipitation (median of 6.0 and 0.5 ng L(-1) for sigmaBDE and sigmaPCB concentrations ("dissolved" + particle), respectively) than in air. The calculated yearly deposition of PBDEs and PCBs indicated that the atmospheric input of PBDEs to the Baltic Proper is currently exceeding that of the PCBs by a factor of 40, while that of the PCBs is decreasing.     

Antioxidative activity of summer savory (Satureja hortensis L.) and rosemary (Rosmarinus officinalis L.) in minced, cooked pork meat

The sensory intensity measured as theabsolute threshold value of spice andrecognition of spice was evaluated for summer savory and rosemary in meat balls. The values forabsolute threshold value of spice were found to be significantly lower for rosemary than for summer savory. The antioxidative activity of the spices was analysed in two accelerated model systems and in a storage experiment. In one of the model systems, oxidation was accelerated by heat and by an elevated pressure of oxygen. Both spices significantly improved the oxidative stability of the meat balls in this model system. In the second model system metal catalyst oxidation in a meat slurry was used and a reduction in the oxidative processes in samples containing the spices was again shown. In both model systems a slightly higher antioxidative activity was seen for rosemary compared to summer savory. In the storage experiment, the spices were added at a sensorially acceptable level and the heat-treated meat balls were stored at 5°C. A significant reduction in the development of warmed-over flavour (WOF) caused by the addition of spices was measured by a reduction in 2-thiobarbituricacid-reactivesubstances (TBARS) and in hexanal. A reduction in TBARS of approximately 30% in meat balls containing added spices was seen independently of packaging in 1% oxygen or in atmospheric air and the reduction (30%) was constant throughout the storage period.     

The Critical Role of Passive Permeability in Designing Successful Drugs

Passive permeability is a key property in drug disposition and delivery. It is critical for gastrointestinal absorption, brain penetration, renal reabsorption, defining clearance mechanisms and drug-drug interactions. Passive diffusion rate is translatable across tissues and animal species, while the extent of absorption is dependent on drug properties, as well as in vivo physiology/pathophysiology. Design principles have been developed to guide medicinal chemistry to enhance absorption, which combine the balance of aqueous solubility, permeability and the sometimes unfavorable compound characteristic demanded by the target. Permeability assays have been implemented that enable rapid development of structure-permeability relationships for absorption improvement. Future advances in assay development to reduce nonspecific binding and improve mass balance will enable more accurately measurement of passive permeability. Design principles that integrate potency, selectivity, passive permeability and other ADMET properties facilitate rapid advancement of successful drug candidates to patients.     

Cell interaction study of amyloid by using luminescent conjugated polythiophene: implication that amyloid cytotoxicity is correlated with prolonged cellular binding

Needles and noodles: Studying amyloid toxicity is important for understanding protein misfolding diseases. Using a luminescent conjugated polythiophene, we found that cell binding of nontoxic filamentous amyloids of insulin and β2-microglobulin was less efficient than that of toxic fibrillar amyloids; this suggests a correlation between amyloid toxicity and cell binding.