Increase in the annual energy production due to a retrofit of vortex generators on blades

The aim of the current work was to analyze the effect of retrofitting vortex generators (VGs) on the blades of a constant RPM, pitch‐regulated, megawatt‐sized turbine suffering from surface roughness. Engineering modelling and experimental work were utilized, indicating that the degradation of energy production may be mitigated by the VGs. The modelling results indicated that the optimal configuration of VGs to maximize the annual energy production (AEP) depends on the degree of severity of surface roughness. Depending on blade surface condition and turbine characteristics, installation of VGs on an incorrect blade span or installation of too large VGs too far out on the blade may cause loss in the AEP. Therefore, engineering modelling is necessary before VGs may be retrofitted on a specific turbine. The modelling results indicated that the worse blade surface, the more gain may be obtained from the VGs. The work included a full‐scale experimental validation of the present engineering model, lasting 27 months and comprising six turbines where VGs were mounted on three, each with a neighboring turbine as a reference. The turbines were analyzed in pairs, and the influence of the VGs was judged upon the relative difference in energy production before and after the installation. The reason was to limit measurement uncertainty. The results showed that all three turbines increased their energy production after the installation. Results from the three pairs showed an average increase in the energy production of 3.3%, being satisfactorily close to the average 2.8% predicted by the present engineering tool.     

Modelling the effects of climate change on the energy system—A case study of Norway

The overall objective of this work is to identify the effects of climate change on the Norwegian energy system towards 2050. Changes in the future wind- and hydro-power resource potential, and changes in the heating and cooling demand are analysed to map the effects of climate change. The impact of climate change is evaluated with an energy system model, the MARKAL Norway model, to analyse the future cost optimal energy system. Ten climate experiments, based on five different global models and six emission scenarios, are used to cover the range of possible future climate scenarios and of these three experiments are used for detailed analyses. This study indicate that in Norway, climate change will reduce the heating demand, increase the cooling demand, have a limited impact on the wind power potential, and increase the hydro-power potential. The reduction of heating demand will be significantly higher than the increase of cooling demand, and thus the possible total direct consequence of climate change will be reduced energy system costs and lower electricity production costs. The investments in offshore wind and tidal power will be reduced and electric based vehicles will be profitable earlier.     

On the synergy between large electric vehicle fleet and high wind penetration – An analysis of the Danish case

Increasing the level of wind power penetration beyond the present level in the Danish power system implies large challenges when it comes to energy management and system stability. Plug-in electric vehicles promise to contribute to the flexibility of the energy system by creating a link between the power system and the transportation sector and provide the possibility to make use of the inherent energy storage of a large electric vehicle (EV) fleet. The present work investigates the effects of different EV charging strategies on the balance between wind power production and consumption in a future Danish power system. The results show that an electrification of the transport sector will indeed reduce the excess of wind power, but additional mechanisms are needed if the full wind power potential in Denmark is utilized. Further it is foreseen that the vehicle-to-grid option (where the vehicle batteries are used as backup at times with little wind power production) will have very limited effects on the overall energy management and is more likely to be used only for regulation and reserve services, also in the longer perspective.     

Significance of biomass support particles in laboratory studies on microbial degradation of organic chemicals in aquifers

In degradation studies of xenobiotics in groundwater environments from where only water samples can be obtained (e.g. established deep groundwater wells, inhomogeneous formations as boulder aquifers, or consolidated aquifers), solids might be added as biomass support materials. The importance of biomass support materials as quartz sand, rock wool and crushed tiles on the degradation of 8 aromatic hydrocarbons (benzene, toluene, o-xylene, 1,2-dichlorobenzene (1,2-DCB), 1,4-dichlorobenzene (1,4-DCB), naphthalene, biphenyl and nitrobenzene) was investigated in experiments with groundwater collected from two aerobic aquifers (Vejen and Grindsted, Denmark). Experiments with only groundwater as well as groundwater suspensions with aquifer sediment were run as references. It was impossible to adjust pH to the desired level in the experiments with crushed tiles, where also substantial sorption of the test compounds and server clogging of filters used in sampling occurred, and this material was therefore useless as biomass support material. Presence of rock wool supported growth of bacteria and increased the degradation (in terms of rates and number of compounds degraded) compared with experiments with groundwater only. However, the degradation was less and the degradation patterns varied more than in the presence of aquifer sediment. Quartz sand gave the most promising results with respect to growth of bacteria, and the degradation patterns of most of the compounds were similar to those obtained in experiments including aquifer sediments, although the latter showed the most substantial degradation. This study suggests that in case aquifer sediment is not available, quartz sand should be added as biomass support material in studies on degradation of organic xenobiotics in groundwater environments.     

The chemistry of Norwegian groundwaters: I. The distribution of radon, major and minor elements in 1604 crystalline bedrock groundwaters

A quality-controlled hydrogeochemical dataset of 1604 groundwater samples from Norwegian crystalline bedrock aquifers has been obtained and subject to analyses of radon (scintillation counting), major and minor elements (ion chromatography and ICP-AES), pH and alkalinity. Cumulative probability curves may be constructed to assess the risk of given parameters violating drinking water norms. Parameters such as radon and fluoride show clear lithological correlation, occurring at high concentrations in granites and low concentrations in anorthosites. Other parameters exhibit a lower degree of correlation with aquifer geochemistry (e.g. pH, major ions) and are likely to be governed by more universal thermodynamic equilibria (the calcium carbonate system) and kinetic factors. On a national basis 13.9% of the bedrock groundwaters exceed the recommended action level for radon, while 16.1% exceed the drinking water norm for fluoride. Considering pH, sodium, radon and fluoride together, 29.9% of all wells violate drinking water maximum concentrations for one or more of these parameters.     

Translocality in Global Software Development: the Dark Side of Global Agile

What happens when agile methods are introduced in global outsourcing set-ups? Agile methods are designed to empower IT developers in decision-making through self-managing collocated teams. We studied how agile methods were introduced into global outsourcing from the Indian IT vendor’s perspective. We explored how agile processes in global outsourcing impacts work conditions of the Indian IT developers, and were surprised to find that agile methodologies, even after 3 years of implementation, created a stressful and inflexible work environment negatively impacting their personal lives. Many of the negative aspects of work, which agile methodologies were developed to reduce, were evident in the global agile outsourcing set-up. We propose translocality to repudiate the dichotomy of global/local reminding us that methodologies and technologies must be understood as immediately localized and situated. Translocality helps us to explain why we cannot determine the impact of global agile as a methodology independent of how it unfolds at particular sites. Instead, we must attend to concrete practices of use when evaluating the impact of new methods.     

Boundary factors and contextual contingencies: configuring electronic templates for healthcare professionals

In this paper, we propose an approach to balance the legitimate and yet conflicting perspectives between standardization and reconfiguration embedded within hospital information systems (HIS) design activities. We report on an action research study of the customization process of an electronic triage and tracking system that was reconfigured to be used in eight Canadian emergency departments. We argue that during HIS design activities, it is essential for both practitioners and system designers to articulate and identify which aspects can be standardized without constraining important local flexibility and which aspects require local reconfiguration to function in a particular work context. To identify these differences, we suggest an analytical distinction between boundary factors and contextual contingencies, which can be used in a design and reconfiguration process. We argue that the process of designing shared electronic templates should be perceived as a common design process, where multiple stakeholders articulate, identify, and negotiate boundary factors and contextual contingencies. Boundary factors are then represented within the shared electronic system, whereas contextual contingencies form the basis for constructing localized versions of the shared application. All local versions include both boundary factors and the reconfigured contextual contingencies.     

The muscular load on the lower back and shoulders due to lifting at different lifting heights and frequencies

The aim of the study was to investigate the muscular load on the lower back and shoulders and the circulatory load on employees at a post center during repetitive lifting of mail transport boxes. A mock-up was designed in the laboratory, a total of nine combinations of lifting height and frequency were studied. Surface EMG was recorded bisymmetrically from m. erector spinae (L3-level) and m. trapezius. The circulatory load was evaluated by measuring the heart rate. The results show a trade off between the low back and shoulders. The maximum load on the low back occurred at the low lifting height (36.3 and 54.4 cm) whereas the maximum load on the shoulders occurred at the high lifting height (144.9 and 163.0 cm).