Participatory Modeling Workshops in a Water-Stressed Basin Result in Gains in Modeling Capacity but Reveal Disparity in Water Resources Management Priorities

Participatory modeling workshops were held in Sonora, México, with the goal of developing water resources management strategies in a water-stressed basin. A model of the water resources system, consisting of watershed hydrology, water resources infrastructure, and groundwater models, was developed deliberatively in the workshops, along with scenarios of future climate and development. Participants used the final version of the water resources systems model to select management strategies. The performance of the strategies was based on the reliability of meeting current and future demands at a daily time scale over a year’s period. Pre- and post-workshop surveys were developed and administered. The survey questions focused on evaluation of participants’ modeling capacity and the utility and accuracy of the models. The selected water resources strategies and the associated, expected reliability varied widely among participants. Most participants could be clustered into three groups with roughly equal numbers of participants that varied in terms of reliance on expanding infrastructure vs. demand modification; expectations of reliability; and perceptions of social, environmental, and economic impacts. The wide range of strategies chosen and associated reliabilities indicate that there is a substantial degree of uncertainty in how future water resources decisions could be made in the region. The pre- and post-survey results indicate that participants believed their modeling abilities increased and beliefs in the utility of models increased as a result of the workshops.     

Ecosystem Service Impacts of Urban Water Supply and Demand Management

Utilities face the challenge of enhancing long-term water security while minimising undesirable economic, social and environmental impacts of supply and demand management options. This paper provides an example of how the ecosystem services concept can be used to enumerate and organise broad impacts of water supply options. A case study of Adelaide, South Australia, is used to examine costs and benefits associated with different sources of water and source-water mix scenarios. Ecosystem service impacts are estimated using estimates from the literature. Seven water supply and demand management options are considered for Adelaide: 1) the River Murray, 2) Mt. Lofty Ranges catchments, 3) wastewater reuse, 4) desalination, 5) stormwater harvesting, 6) groundwater and 7) water conservation. The largest costs are associated with sourcing water from conservation measures such as water restrictions on outdoor watering estimated at $1.87/kL. Salinity damage costs associated with residential uses are estimated at up to $1.54/kL. Salinity damage costs of wastewater reuse were estimated at $1.16/kL. The largest benefit is coastal amenity services associated with stormwater harvesting and treatment estimated at $1.03/kL. Results show that there is a trade-off between financial costs and ecosystem services impacts with source-water mix scenarios with the highest ecosystem services cost having the lowest financial O&M cost and vice versa. This highlights the importance of taking ecosystem services into account when evaluating water supply options.     

Binary phase behavior of 1,3-distearoyl-2-oleoyl-sn-glycerol (SOS) and 1,3-distearoyl-2-linoleoyl-sn-glycerol (SLS)

The binary phase behavior of SOS (1,3-distearoyl-2-oleoyl-sn-glycerol) and SLS (1,3-distearoyl-2-linoleoyl-sn-glycerol) was examined by using DSC and conventional and synchrotron radiation X-ray diffraction. The solid-solution phases were observed in the metastable α and γ forms in all concentration ranges. Results indicated that the miscible γ form did not transform to the β′ form when the mixtures were subjected to simple cooling from a high-temperature liquid to a low-temperature solid phase. However, and α-melt-mediated transformation into β′ and β₂ resulted in the formation of immiscible phases in concentration ranges of SLS below 30%. By contrast, at SLS concentration ranges above 30%, the α-melt-mediated transformation caused crystallization of only the γ form, and β′ and β₂ crystals did not appear. These results show that the specific interactions between SOS and SLS are operative in the phase behavior of the mixture states of SOS and SLS.     

The influence of food emulsifiers on fat and sugar dispersions in oils. III. Water content,purity of oils

The influence of water on the interactions between fat and sugar crystals dispersed in triglyceride (vegetable) oils was qualitatively estimated from sedimentation and rheological experiments. The experiments were performed both with and without food emulsifiers (monoglycerides and lecithins) present in the oil. The effects of minor natural oil components (nontriglycerides) on the interactions and on emulsifier adsorption to the crystals were examined by comparing a commercial refined oil and a chromatographically purified oil. The results show that water generally increases the adhesion between fat and sugar crystals in oils and also increases the surface activity of the oil-soluble food emulsifiers. Minor oil components give a small increase in the adhesion between fat and sugar crystals in oils, but do not influence the adsorption of food emulsifiers in any systematic way.     

Dewatering behaviour of water treatment sludges associated with contaminated site remediation in Antarctica

Sludge reduction and dewatering is an important aspect of water and waste water treatment. This is especially true in the case of Australia's Antarctic contaminated site remediation program, where the reduction in volume of wastes to be returned to Australia can lead to significant transport and handling cost savings. The dewatering characterisation of water treatment sludges from an Antarctic contaminated site was conducted using a theory of suspension dewatering developed by Buscall, Landman and White. This theory uses fundamental material properties of compressibility and permeability to determine the diffusivity of a suspension. Diffusivity is a useful property that can be used to directly compare the dewaterability of various sludges. In this investigation, several water treatment sludges were collected and characterised in the field to determine the impact of temperature and additives on compressibility, permeability and diffusivity. The Antarctic sludges were found to be less compressible and less permeable than materials such as mineral suspensions and alum water treatment sludges. Compressibility was found to decrease with the addition of powdered coagulation aids such as bentonite and chitosan.     

Objective classification of vehicle seat discomfort

The objective of this study was to identify how physiological measures relate to self-reported vehicle seating discomfort. Twelve subjects of varied anthropometric characteristics were enrolled in the study. Subjects sat in two seats over a 2-h period and were evaluated via three physiological measures (near-infrared spectroscopy, electromyography and pressure mapping) yielding six testing sessions. Subjective discomfort surveys were recorded before and after each session for nine regions of the body. Conditional classification discomfort models were developed through dichotomised physiological responses and anthropometry to predict subjective discomfort in specific body locations. Models revealed that subjects taller than 171 cm with reduced blood oxygenation in the biceps femoris or constant, low-level muscle activity in the trapezius tended to report discomfort in the lower extremities or neck, respectively. Subjects weighing less than 58 kg with reduced blood oxygenation in the biceps femoris or unevenly distributed pressure patterns tended to report discomfort in the buttocks. The sensitivities and specificities of cross-validated models ranged between 0.69 and 1.00.     

Numerical characterization and experimental verification of an in-plane MEMS-actuator with thin-film aluminum heater

In this paper, a novel concept of a thermo-mechanical MEMS actuator using aluminum thin-film heaters on a thermal oxide for electrical insulation is presented. The actuator is part of an universal tensile testing platform for thermo-mechanical material characterization of one dimensional materials on a micro- and nano-scopic scale under different environmental conditions, as varying temperatures, pressure, moisture or even vacuum and is realised in BDRIE technology. It is shown, that the actuator concept fulfills the requirements for the use in a tensile loading stage along with heterogeneously integrated nanofunctional elements, following a specimen centered approach in line with bottom-up self-assembly processes. Simulation and experiment agree very well in the thermal and mechanical domain and allow subsequent optimisation of the actuator performance.     

Wafer bonding using Cu–Sn intermetallic bonding layers

Wafer-level Cu–Sn intermetallic bonding is an interesting process for advanced applications in the area of MEMS and 3D interconnects. The existence of two intermetallic phases for Cu–Sn system makes the wafer bonding process challenging. The impact of process parameters on final bonding layer quality have been investigated for transient liquid phase wafer-level bonding based on the Cu–Sn system. Subjects of this investigation were bonding temperature profile, bonding time and contact pressure as well as the choice of metal deposition method and the ratio of deposited metal layer thicknesses. Typical failure modes in intermetallic compound growth for the mentioned process and design parameters have been identified and were subjected to qualitative and quantitative analysis. The possibilities to avoid abovementioned failures are indicated based on experimental results.     

Detecting Fixed Patterns in Chordal Graphs in Polynomial Time

The Contractibility problem takes as input two graphs G and H, and the task is to decide whether H can be obtained from G by a sequence of edge contractions. The Induced Minor and Induced Topological Minor problems are similar, but the first allows both edge contractions and vertex deletions, whereas the latter allows only vertex deletions and vertex dissolutions. All three problems are NP-complete, even for certain fixed graphs H. We show that these problems can be solved in polynomial time for every fixed H when the input graph G is chordal. Our results can be considered tight, since these problems are known to be W[1]-hard on chordal graphs when parameterized by the size of H. To solve Contractibility and Induced Minor, we define and use a generalization of the classic Disjoint Paths problem, where we require the vertices of each of the k paths to be chosen from a specified set. We prove that this variant is NP-complete even when k=2, but that it is polynomial-time solvable on chordal graphs for every fixed k. Our algorithm for Induced Topological Minor is based on another generalization of Disjoint Paths called Induced Disjoint Paths, where the vertices from different paths may no longer be adjacent. We show that this problem, which is known to be NP-complete when k=2, can be solved in polynomial time on chordal graphs even when k is part of the input. Our results fit into the general framework of graph containment problems, where the aim is to decide whether a graph can be modified into another graph by a sequence of specified graph operations. Allowing combinations of the four well-known operations edge deletion, edge contraction, vertex deletion, and vertex dissolution results in the following ten containment relations: (induced) minor, (induced) topological minor, (induced) subgraph, (induced) spanning subgraph, dissolution, and contraction. Our results, combined with existing results, settle the complexity of each of the ten corresponding containment problems on chordal graphs.