Surface and interface properties of PdCr/SiC Schottky diode gas sensor annealed at 425°C

The surface and interface properties of Pd_0.9Cr_0.1/SiC Schottky diode gas sensors both before and after annealing are investigated using Auger electron spectroscopy (AES), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). At room temperature the alloy reacted with SiC and formed Pd_xSi only in a very narrow interfacial region. After annealing for 250 h at 425°C, the surface of the Schottky contact area has much less silicon and carbon contamination than that found on the surface of an annealed Pd/SiC structure. Palladium silicides (Pd_xSi) formed at a broadened interface after annealing, but a significant layer of alloy film is still free of silicon and carbon. The chromium concentration with respect to palladium is quite uniform down to the deep interface region. A stable catalytic surface and a clean layer of Pd_0.9Cr_0.1 film are likely responsible for significantly improved device sensitivity.     

Experimental validation of a numerical model for heat transfer in vacuum glazing

Flat vacuum glazings consisting of a narrow evacuated space between two glass panes separated by an array of small support pillars have been fabricated. A guarded hot box calorimeter was designed and constructed to measure their heat transfer coefficients. Experimental measurements of temperatures and rates of heat transfer were found to be in very good agreement with those predicted using a developed finite element model. A method for determining the heat transfer coefficient of the evacuated gap has been established and comparisons are made between the measured and predicted glass surface temperature profiles of the exposed glass area and the heat transfer coefficients of the total glazing system in order to validated the model.     

Thermal performance of an electrochromic vacuum glazing

Using a three-dimensional finite volume model, the thermal performance of an electrochromic vacuum glazing was simulated for insolation intensities between 0 and 1200 W m⁻². The electrochromic evacuated glazing simulated consisted of three glass panes 0.5 m by 0.5 m with a 0.12 mm wide evacuated space between two 4 mm thick panes supported by 0.32 mm diameter pillars spaced on a 25 mm square grid contiguously sealed by a 6 mm wide metal edge seal. The third glass pane on which the electrochromic layer was deposited was assumed to be sealed to the evacuated glass unit. The simulations indicate that when facing the indoor environment, the temperature of the glass pane with the electrochromic layer can reach 129.5 °C for an incident insolation of 600 W m⁻². At such temperatures unacceptable occupant comfort would ensue and the durability of the electrochromic glazing would be compromised. The glass pane with the electrochromic layer must therefore face the outdoor environment.     

Noncentrosymmetric Tetrel Pnictides RuSi4P4 and IrSi3P3: Nonlinear Optical Materials with Outstanding Laser Damage Threshold

Noncentrosymmetric (NCS) tetrel pnictides have recently generated interest as nonlinear optical (NLO) materials due to their second harmonic generation (SHG) activity and large laser damage threshold (LDT). Herein nonmetal-rich silicon phosphides RuSi₄P₄ and IrSi₃P₃ are synthesized and characterized. Their crystal structures are reinvestigated using single crystal X-ray diffraction and ²⁹Si and ³¹P magic angle spinning NMR. In agreement with previous report RuSi₄P₄ crystallizes in NCS space group P1, while IrSi₃P₃ is found to crystallize in NCS space group Cm, in contrast with the previously reported space group C2. A combination of DFT calculations and diffuse reflectance measurements reveals RuSi₄P₄ and IrSi₃P₃ to be wide bandgap (E_g) semiconductors, E_g = 1.9 and 1.8 eV, respectively. RuSi₄P₄ and IrSi₃P₃ outperform the current state-of-the-art infrared SHG material, AgGaS₂, both in SHG activity and laser inducer damage threshold. Due to the combination of high thermal stabilities (up to 1373 K), wide bandgaps (≈2 eV), NCS crystal structures, strong SHG responses, and large LDT values, RuSi₄P₄ and IrSi₃P₃ are promising candidates for longer wavelength NLO materials.     

Proportional degradation services in wireless/mobile adaptive multimedia networks

Adaptive multimedia services are very attractive since resources in wireless/mobile networks are relatively scarce and widely variable, and more importantly the resource fluctuation caused by mobility and channel fading can be mitigated using adaptive services. Therefore, there are extensive research activities on Quality of Service (QoS), call admission control, as well as bandwidth degradation and adaptation for adaptive multimedia services in wireless/mobile networks in recent years. However, fairness of bandwidth degradation has largely been ignored in previous work and remains an important issue in adaptive multimedia service provisioning. In this paper, we propose and study proportional degradation service provisioning in wireless/mobile networks that offer multiple classes of adaptive multimedia services. The proposed proportional degradation fairness model guarantees the proportional bandwidth degradation among different classes of services. Two proportional degradation scenarios are studied in this paper. In the first scenario, we study the proportional degradation provisioning with two QoS parameters for adaptive multimedia: the degradation ratio (DR) and the degradation degree (DD). In the second scenario, we study the proportional degradation provisioning with a new QoS parameter for adaptive multimedia: the degradation area (DA). For each scenario, based on the QoS parameters, proportional degradation adaptation algorithms are proposed to approximate the proportional degradation model, to fairly adapt calls' degradations, to utilize the system resource efficiently, as well as to optimize QoS parameters. Performance studies show that in the first scenario, proportional DR has been achieved very well, whereas proportional DD has not been well achieved. In other words, DR outperforms DD in terms of proportional degradation. In the second scenario, proportional DA has been well achieved. Furthermore, bandwidth resources have been efficiently utilized and DA has been minimized. Copyright © 2004 John Wiley & Sons, Ltd.     

Scalability in Global Mobile Information Systems (GloMo): Issues,Evaluation Methodology and Experiences

The GloMo (Global Mobile Information Systems) project¹ has focused on developing new wireless ad hoc networking technologies. These new technologies rely on a broad and varied set of techniques to help cope with the problems inherent in the wireless environment. One of the most critical design elements of all the various technologies is their applicability in large scale deployments. The main objective of our work is to develop and implement a simulation methodology to help evaluate the scalability of these new ad hoc networking technologies and gain some insight into the various aspects of ad hoc network performance scalability issues. To achieve that we have developed a scalability performance evaluation framework and plan, that spans all the various dimensions of scalability: size (number of nodes and density), traffic, operational environment (i.e. propagation models, terrain etc.), mobility. For demonstration purposes we have applied this process on a representative integrated protocol suite designed to provide communication services in mobile ad hoc wireless networks. The corresponding results of the two most critical aspects of scalability properties in tactical networks (i.e. network initialization time and traffic scalability) are also presented here, and demonstrate that a very extensive evaluation of the corresponding scalability metrics under a combination of the various scalability dimensions defined in this paper, is necessary in order to provide an in-depth analysis of the scalability properties in wireless mobile ad hoc networking environments.     

Adaptive Network Overload Controls

Network overloads can seriously degrade the quality or availability of telecommunications services if they are not effectively controlled. This paper explains why overload controls are required and how they should behave for both today's and future networks. The requirements of overload controls are presented, in terms of the conditions under which they must operate and the behaviour they should exhibit. Good design principles are proposed, which include identifying the controlled variable, the control structure, convergence and stability, and parameter configuration, while ensuring that different implementations work together. Relevant network standards are highlighted, and the paper stresses the crucial importance that these standards adequately specify the behaviour of overload controls.     

高性能LCoS虚拟显示器的光学特性

本文叙述一种用于LCoS双瞳虚拟显示器的新型光路结构,它首次达到或超过了pSi(多晶硅)头戴装置的性能36°的视场,801的对比度,无需IPD调节(12mm出射光瞳),并且整个电-光模件的封装配合并不比奥林巴斯EyeTrek和索尼Glasstron的工业标准更复杂.     

迈向纳米级芯片技术的IMEC研发——先进封装技术部分

近期、芯片制造工艺发展到了纳米时代(栅极宽度<100nm),IM E C发起并联合了全球七家主要半导体芯片制造商和几乎所有主要设备制造商,在刚建立起来的φ300m m硅片尺寸工艺中试线上,共同展开了45nm和32nm的芯片制造工艺的研究工作。虽然芯片封装技术也在快速发展,但其速度赶不上芯片制造工艺的迅猛发展。在先进的芯片制造技术和最新的PCB技术之间所谓的“互连技术壕沟”在不断扩大。而且,不断增加的工作频率,以及由于集成电路复杂程度提高而导致I O管脚的增加,都要求封装技术产生重大的技术变革,以保证在将纳米级的芯片与毫米级的系统相连…     

On the robustness of parameter estimation of superimposed signalsby dynamic programming

We analyze a recently proposed dynamic programming algorithm (REDP) for maximum likelihood (ML) parameter estimation of superimposed signals in noise. We show that it degrades gracefully with deviations from the key assumption of a limited interaction signal model (LISMO), providing exact estimates when the LISMO assumption holds exactly. In particular, we show that the deviations of the REDP estimates from the exact ML are continuous in the deviation of the signal model from the LISMO assumption. These deviations of the REDP estimates from the MLE are further quantified by a comparison to an ML algorithm with an exhaustive multidimensional search on a lattice in parameter space. We derive an explicit expression for the lattice spacing for which the two algorithms have equivalent optimization performance, which can be used to assess the robustness of REDP to deviations from the LISMO assumption. The values of this equivalent lattice spacing are found to be small for a classical example of superimposed complex exponentials in noise, confirming the robustness of REDP for this application