Use of ARMA block processing for estimating stationary low-frequency electromechanical modes of power systems

Accurate knowledge of low-frequency electromechanical modes in power systems gives vital information about the stability of the system. Current techniques for estimating electromechanical modes are computationally intensive and rely on complex system models. This research complements model-based approaches and uses measurement-based techniques. This paper discusses the development of an autoregressive moving average (ARMA) block-processing technique to estimate these low-frequency electromechanical modes from measured ambient power system data without requiring a disturbance. This technique is applied to simulated data containing a stationary low-frequency mode generated from a 19-machine test model. The frequency and damping factor of the estimated modes are compared with the actual modes for various block sizes. This technique is also applied to 35-min blocks of actual ambient power system data before and after a disturbance and compared to results from Prony analysis on the ringdown from the disturbance.     

Oxydation De L'alliage De Titane Ta6V4 Par L'oxygene Sec Entre 700°C Et 1000°C—I. Resultats Experimentaux

The oxidation kinetics of the titanium-base alloy Ti4V6Al was studied between 700 and 1000°C at several pressures of pure oxygen. The result shows a difference in oxidation behaviour between the Ti4V6A1 alloy and pure Ti at high temperatures. (The distinct kinetic law reported has numerous stages corresponding to successive accelerations and reductions in corrosion rate.) The study of the products formed (microscopic observation of cross-sections, examination of the distribution of elements with the microprobe) showed a stratified scale structure with several sublayers of A1₂O₃ parallel to the reaction front.     

Soft X‐ray Ptychographic Imaging and Morphological Quantification of Calcium Silicate Hydrates (C–S–H)

Morphological details of calcium silicate hydrate (C–S–H) stemming from the hydration process of Portland cement (PC) phases are crucial for understanding the PC‐based systems but are still only partially known. Here we introduce the first soft X‐ray ptychographic imaging of tricalcium silicate (C₃S) hydration products. The results are compared using both scanning transmission X‐ray and electron transmission microscopy data. The evidence shows that ptychography is a powerful method to visualize the details of outer and inner product C–S–H of fully hydrated C₃S, which have fibrillar and an interglobular structure with average void sizes of 20 nm, respectively. The high‐resolution ptychrography image enables us to perform morphological quantification of C–S–H, and, for the first time, to possibly distinguish the contributions of inner and outer product C–S–H to the small angle scattering of cement paste. The results indicate that the outer product C–S–H is mainly responsible for the q^?3 regime, whereas the inner product C–S–H transitions to a q^?2 regime. Various hypotheses are discussed to explain these regimes.     

Time‐space PGD for the rapid solution of 3D nonlinear parametrized problems in the many‐query context

This work deals with the question of the resolution of nonlinear problems for many different configurations in order to build a ‘virtual chart’ of solutions. The targeted problems are three‐dimensional structures driven by Chaboche‐type elastic‐viscoplastic constitutive laws. In this context, parametric analysis can lead to highly expensive computations when using a direct treatment. As an alternative, we present a technique based on the use of the time‐space proper generalized decomposition in the framework of the LATIN method. To speed up the calculations in the parametrized context, we use the fact that at each iteration of the LATIN method, an approximation over the entire time‐space domain is available. Then, a global reduced‐order basis is generated, reused and eventually enriched, by treating, one‐by‐one, all the various parameter sets. The novelty of the current paper is to develop a strategy that uses the reduced‐order basis for any new set of parameters as an initialization for the iterative procedure. The reduced‐order basis, which has been built for a set of parameters, is reused to build a first approximation of the solution for another set of parameters. An error indicator allows adding new functions to the basis only if necessary. The gain of this strategy for studying the influence of material or loading variability reaches the order of 25 in the industrial examples that are presented. Copyright © 2015 John Wiley & Sons, Ltd.     

Optimization of a multiperiod refinery planning problem under uncertainty

Uncertainty in refinery planning presents a significant challenge in determining the day-to-day operations of an oil refinery. Deterministic modeling techniques often fail to account for this uncertainty, potentially resulting in reduced profit. The stochastic programming framework explicitly incorporates parameter uncertainty in the problem formulation, thus giving preference to robust solutions. In this work, a nonlinear, multiperiod, industrial refinery problem is extended to a two-stage stochastic problem, formulated as a mixed-integer nonlinear program. A crude-oil sequencing case study is developed with binary scheduling decisions in both stages of the stochastic programming problem. Solution via a decomposition strategy based on the generalized Benders decomposition (GBD) algorithm is proposed. The binary decisions are designated as complicating variables that, when fixed, reduce the full-space problem to a series of independent scenario subproblems. Through the application of the GBD algorithm, a feasible mixed-integer solution is obtained that is more robust to uncertainty than its deterministic counterpart.     

Effect of Thermomechanical Fatigue on Precipitation Microstructure in Two Precipitation-Hardened Cast Aluminum Alloys

Thermal loading induces modifications of the precipitation microstructure of Al–Si–Cu–Mg alloys. This study focuses on the effect of deformation on precipitation microstructure during thermomechanical loadings. Several specimens were thermomechanically cycled while others were exposed to the same thermal cycles without any mechanical loading. The nature and morphological characteristics of the precipitation microstructure of the thermomechanically cycled specimens are compared to those of the thermally aged ones, using transmission electron microscopy (TEM), in order to assess the effect of deformation on the precipitation microstructure and especially on the kinetics of precipitate growth. The absence of any significant effect of superimposed straining during thermal cycling is discussed. Implications for the prevision of yield strength degradation during service operation are briefly presented.

     

Pentadecane functionalized graphite oxide sheets as a tool for the preparation of electrical conductive polyethylene/graphite oxide composites

Covalent functionalization of pentadecane-decorated thermally reduced graphite oxide (GO) sheets has been studied as a tool for the preparation of polyethylene/GO composites exhibiting rheological and electrical percolation thresholds. It was accomplished through pentadecane based radical addition onto unsaturated bonds located on the GO sheets' surface using dicumyl peroxide as hydrogen abstractor. This chemical functionalization influences the affinity of the formed pentadecane grafted GO sheets for various solvents. Then, the compounding of the composites pentadecane grafted GO/PE was performed at a processing temperature of 140 °C with 25, 20, 15, 10, 8 and 5 wt% loadings. Rheological and electrical percolation thresholds were found between 10 and 15 wt% for polyethylene/pentadecane functionalized graphene oxide composites while the composite graphite/PE at the same loading percentage did not reach any percolation threshold.     

Role of strain induced crystallization and oxidative crosslinking in fracture properties of rubbers

Tensile properties and crack propagation properties, especially critical strain energy release rate in mode I, G_IC, have been used to investigate fracture properties of elastomers and their relationships with microstructure. These investigations were mainly based on a series of comparisons: first, the behaviour of polychloroprene rubber (CR), undergoing stress hardening due to strain induced crystallization (SIC) and oxidative crosslinking (OCL) was compared with that of chlorinated polyethylene (CPE), which undergoes SIC but not OCL, and with a polyurethane based on hydroxyl terminated polybutadiene (PU) which undergoes OCL but not SIC. Comparisons were also made on CR between fracture behaviour at ambient temperature, where SIC occurs and at 100 °C where there is no SIC. Finally, oxidative crosslinking was used to vary in a continuous way the crosslink density in CR and PU, in order to evaluate the role of crosslinking in fracture behaviour.     

Effect of Oral and Parenteral N Nutrition vs N-Free Nutrition on the Endogenous Amino Acid Flow at the Ileum of the Pig*

Two methods were tested for suppressing the depressive effect of N-free diets on the digestive secretions in pigs: the blood perfusion of amino acids (AA) or the peptide alimentation method. In the latter, enzymically hydrolysed casein (EHC), composed of oligopeptides and free AA, was used as the source of nitrogen. The unabsorbed dietary N molecules were discarded from the ileal digesta by ultrafiltration or gel filtration, assuming that the endogenous fraction did not contain significant amounts of small molecules. The AA supply by blood perfusion had no effect on the ileal endogenous AA losses (8·0 g AA kg⁻¹ DM intake) in growing pigs (±50 kg), compared with the N-free diet alone (8·3 g), whereas the EHC supplementation significantly increased them (18·0 g). The increase was due to both endogenous and dietary N. The presence of unabsorbed dietary AA in the ileal digesta was confirmed by the AA profile of the soluble molecules with a very low molecular mass (<3 kDa), which was close to that of EHC. Both ultrafiltration (cut-offs of 3 or 10 kDa) and gel filtration methods, utilised to discard the remaining dietary molecules, also eliminated a significant proportion of endogenous AA.