High pass filter with above IC integrated SrTiO3 high K MIM capacitors

This paper describes realization and characterization of SrTiO₃ (STO) high K MIM capacitors above BiCMOS integrated circuit (IC). These capacitances are connected to IC and are used as coupling capacitors in order to realize a high pass filter. Surface capacitance achieved is 10 nF/mm² with capacitance value of 1.2 nF. The process for STO MIM fabrication does not exceed 400 °C, which is compatible with interconnections. Typical K and dielectric losses values obtained are, respectively 110% and 2%. Yield obtained reaches 83% for capacitors. A functional high pass filter using these STO capacitors was realized in this study. It exhibits a cut-off frequency at 6.5 kHz and a constant gain at higher frequencies of −1.3 dB.     

Optimal data gathering paths and energy-balance mechanisms in wireless networks

This paper studies the data gathering problem in wireless networks, where data generated at the nodes has to be collected at a single sink. We investigate the relationship between routing optimality and fair resource management. In particular, we prove that for energy-balanced data propagation, Pareto optimal routing and flow maximization are equivalent, and also prove that flow maximization is equivalent to maximizing the network lifetime. We algebraically characterize the network structures in which energy-balanced data flows are maximal. Moreover, we algebraically characterize communication links which are not used by an optimal flow. This leads to the characterization of minimal network structures supporting the maximal flows.We note that energy-balance, although implying global optimality, is a local property that can be computed efficiently and in a distributed manner. We suggest online distributed algorithms for energy-balance in different optimal network structures and numerically show their stability in particular setting. We remark that although the results obtained in this paper have a direct consequence in energy saving for wireless networks they do not limit themselves to this type of networks neither to energy as a resource. As a matter of fact, the results are much more general and can be used for any type of network and different types of resources.     

A new hybrid constraint-based approach for 3G network planning

This letter proposes a novel constraint-based 3G network planning model and a novel hybrid approach for optimizing the 3G network planning problem. Computational results show that the model and the approach are more efficient than the mathematical model and the existing heuristics. Optimal solutions are always obtained for small and medium sized problems. For larger sized problems, the final results are on average within 5.77%-7.48% of the lower bounds. The proposed hybrid approach can be an efficient tool for tackling a wide range of combinatorial NP-hard problems.     

Silicene Nanoribbons on an Insulating Thin Film

Silicene, a new 2D material has attracted intense research because of the ubiquitous use of silicon in modern technology. However, producing free-standing silicene has proved to be a huge challenge. Until now, silicene could be synthesized only on metal surfaces where it naturally forms strong interactions with the metal substrate that modify its electronic properties. Here, the authors report the first experimental evidence of silicene nanoribbons on an insulating NaCl thin film. This work represents a major breakthrough, for the study of the intrinsic properties of silicene, and by extension to other 2D materials that have so far only been grown on metal surfaces.     

The PANOPTIC Camera: A Plenoptic Sensor with Real-Time Omnidirectional Capability

A new biologically-inspired vision sensor made of one hundred “eyes” is presented, which is suitable for real-time acquisition and processing of 3-D image sequences. This device, named the Panoptic camera, consists of a layered arrangement of approximately 100 classical CMOS imagers, distributed over a hemisphere of 13 cm in diameter. The Panoptic camera is a polydioptric system where all imagers have their own vision of the world, each with a distinct focal point, which is a specific feature of the Panoptic system. This enables 3-D information recording such as omnidirectional stereoscopy or depth estimation, applying specific signal processing. The algorithms dictating the image reconstruction of an omnidirectional observer located at any point inside the hemisphere are presented. A hardware architecture which has the capability of handling these algorithms, and the flexibility to support additional image processing in real time, has been developed as a two-layer system based on FPGAs. The detail of the hardware architecture, its internal blocks, the mapping of the algorithms onto the latter elements, and the device calibration procedure are presented, along with imaging results.     

FHCF: A Simple and Efficient Scheduling Scheme for IEEE 802.11e Wireless LAN

The IEEE 802.11e medium access control (MAC) layer protocol is an emerging standard to support quality of service (QoS) in 802.11 wireless networks. Some recent work shows that the 802.11e hybrid coordination function (HCF) can improve significantly the QoS support in 802.11 networks. A simple HCF referenced scheduler has been proposed in the 802.11e which takes into account the QoS requirements of flows and allocates time to stations on the basis of the mean sending rate. As we show in this paper, this HCF referenced scheduling algorithm is only efficient and works well for flows with strict constant bit rate (CBR) characteristics. However, a lot of real-time applications, such as videoconferencing, have some variations in their packet sizes, sending rates or even have variable bit rate (VBR) characteristics. In this paper we propose FHCF, a simple and efficient scheduling algorithm for 802.11e that aims to be fair for both CBR and VBR flows. FHCF uses queue length estimations to tune its time allocation to mobile stations. We present analytical model evaluations and a set of simulations results, and provide performance comparisons with the 802.11e HCF referenced scheduler. Our performance study indicates that FHCF provides good fairness while supporting bandwidth and delay requirements for a large range of network loads. Pierre Ansel received a multidisciplinary in-depth scientific training in different fields such as Pure and Applied Mathematics, Physics, Mechanics, Computer Science and Economics from the Ecole Polytechnique, Palaiseau, France. Then, he joined the Ecole Nationale Superieure des Telecommunications, Paris, France in 2005 where he went further into electronics, databases, computer network security and high speed networks. He received a multidisciplinary master of sciences degree and an additional master of sciences degree in telecommunications in 2005. He did a summer internship in 2003 in INRIA, Sophia Antipolis, France where he worked on the Quality of Service in 802.11 networks at Planete Group, France. Then in 2004, he joined France Telecom R&D, Issy-les-Moulineaux, France to work on Intranet Security issues. He designed a WiFi security supervision architecture based on WiFi Intrusion Detection Sensors. He is currently a French civil servant and belongs to the French Telecommunications Corps. Qiang Ni received the B.Eng., M.Sc. and Ph.D. degrees from Hua Zhong University of Science and Technology (HUST), Wuhan City, China in 1993, 1996 and 1999 respectively. He is currently a faculty member in the Electronic and Computer Engineering Division,School of Engineering and Design, Brunel University, West London, U.K. Between 2004 and 2005 he was a Senior Researcher at the Hamilton Institute, National University of Ireland, Maynooth. From 1999 to 2001, he was a post-doctoral research fellow in the multimedia and wireless communication laboratory, HUST, China. He visited and conducted research at the wireless and networking group of Microsoft Research Asia Lab during the year of 2000. From Sept. 2001 until may 2004, he was a research staff member at the Planète group of INRIA Sophia Antipolis France. Since 2002, he has been active as a voting member at the IEEE 802.11 wireless LAN standard working group. His current research interests include communication protocol design and performance analysis for wireless networks, cross-layer optimizations, vertical handover and mobility management in mobile wireless networks, and adaptive multimedia transmission over hybrid wired/wireless networks. He has authored /co-authored over 40 international journal/conference papers, book chapters, and standard drafts in this field. He is a member of IEEE. E-mail: Qiang.Ni@ieee.org Thierry Turletti received the M.S. (1990) and the Ph.D. (1995) degrees in computer science both from the University of Nice – Sophia Antipolis, France. He has done his PhD studies in the RODEO group at INRIA Sophia Antipolis. During the year 1995–96, he was a postdoctoral fellow in the Telemedia, Networks and Systems group at LCS, MIT. He is currently a research scientist at the Planete group at INRIA Sophia Antipolis. His research interests include multimedia applications, congestion control and wireless networking. Dr. Turletti currently serves on the Editorial Board of Wireless Communications and Mobile Computing.     

Caractérisation et résultats de fiabilité de transistors à haute mobilité électronique (HEMT)

The telecommunication systems require introduction of high performance devices especially for microwave applications. The emergence of molecular beam epitaxy as a growth technique allows the fabrication of heterostructure-based performing devices. Thus, this communication will focus on the reliability of technologies used for the development of field effect transistor using heterostructures and called HEMT (high electron mobility transistor).     

Towards a new tool for the evaluation of the quality of ultrasound compressed images

This paper presents a new tool for the evaluation of ultrasound image compression. The goal is to measure the image quality as easily as with a statistical criterion, and with the same reliability as the one provided by the medical assessment. An initial experiment is proposed to medical experts and represents our reference value for the comparison of evaluation criteria. Twenty-one statistical criteria are selected from the literature. A cumulative absolute similarity measure is defined as a distance between the criterion to evaluate and the reference value. A first fusion method based on a linear combination of criteria is proposed to improve the results obtained by each of them separately. The second proposed approach combines different statistical criteria and uses the medical assessment in a training phase with a support vector machine. Some experimental results are given and show the benefit of fusion.     

White Electrofluorescence Switching from Electrochemically Convertible Yellow Fluorescent Dyad

A fluorescent naphthalimide‐tetrazine dyad (NITZ) was examined for electrofluorochromism. The reversible electrochemistry of the tetrazine was accompanied by the fluorescence change through a quasi‐complete energy transfer in an electrochemical cell prepared by the mixture of polymer electrolyte and naphthalimide‐tetrazine dyad. Owing to the energy transfer within the dyad (naphthalimide and tetrazine), the fluorescence efficiency of NITZ was much enhanced and the effective fluorophore concentration in this system was much less than other tetrazine based electrofluorochromic device (EFD). Thus the yellow fluorescence of NITZ was switched on and off remarkably even with small quantity of NITZ (1 wt.%) in an EFD upon application of step potentials for different redox state. Furthermore, multi‐color fluorescence switching was achieved by blending a naphthalimide to the electrofluorochromic layer, to show white‐blue‐dark state of fluorescence. Since the tetrazine and naphthalimide units have their emission quenched at different potentials, the emission color could be tuned by quenching emission at selected wavelengths, reversibly, under low working potentials.     

Quantitative evaluation of three calibration methods for 3-D freehand ultrasound

In this paper, three different calibration methods for three-dimensional (3-D) freehand ultrasound (US) are evaluated. Calibration is the process of estimating the rigid transformation from US image coordinates to the coordinate system of the tracking sensor mounted onto the probe. Calibration accuracy has an important impact on quantitative studies. Geometrical precision can also be crucial in many interventions and surgery. The proposed evaluation framework relies on a single point phantom and a 3-D US phantom which mimics the US characteristics of human liver. Four quality measures are used: 3-D point localization criterion, distance and volume measurements, and shape based criterion. Results show that during the acquisition procedure, volumetric measurements and shapes of the reconstructed object depend on probe motion used, particularly fan motions for which errors are larger. It is also shown that accurate calibration is essential to obtain reliable quantitative information.