IPv6 delay and loss performance evolution

Although packet delay and loss are two important parameters of the Internet performance, to the best of our knowledge, the evolution of large‐scale IPv6 delay and loss performance has previously not been studied. In this paper, we analyze more than 600 end‐to‐end IPv6 paths between about 26 testboxes of RIPE Network Coordination Centre over two years, and compare the delay and loss performance over time with their IPv4 counterparts. We present and discuss the measurement methodologies and show that IPv6 paths have a higher delay and loss than their IPv4 counterparts. The main reason for the worse performance stems from IPv6‐in‐IPv4 tunnels rather than from native IPv6 paths and such tunnels are still widely used today. Copyright © 2007 John Wiley & Sons, Ltd.     

马铃薯淀粉的交联-聚合体化学修饰途径

The crosslink reaction is in fact from a commercial perspective the most reward ing reacting there is.It is used to adjust viscosity or rheology parameter in a large number of applications like p.e.the food or adhesives and textile printing.     

Quantitative aspects of two methods to dissolve collagen-free muscle proteins from acetone dry powders of Guelders ring sausage

Summary The purpose of this study was to find experimental conditions for the complete solubility of collagen-free muscle proteins (CFMP) using acetone powder of Guelders ring sausage. Preliminary experiments were carried out to choose the best procedure for preparing the acetone dry powder. Two different methods of acetone extraction of minced sausage were compared. The acetone dry mass (ADM) method using continuous extraction in a Soxhlet [2] apparatus gave better results than the acetone powder (ACP) method, which used a blender [1]. The ADM method was used for further investigations. ADM was extracted with two types of sodium dodecyl sulphate (SDS), containing solvents A and B. Solvent A contains a Tris-boric acid buffer (pH 8.2) with 1.5% (m/v) SDS and 0.05% (m/v) dithioerythreitol [3]. Solvent B is a borate-chloric acid buffer (pH 9.0) with 2.0% (m/v) SDS and 1.0% (m/v) mercapto-ethanol [2]. Both solvents showed a linear relationship between the quantities of CFMP in ADM and the dissolved CFMP. The linear relationships were found between quantities of 10.0 and 30.0 mg (solution A) and of 5.0 and 30.0 mg ADM (solution B) per ml solvent. The solubility of CFMP was better in solvent B than in solution A. Completely dissolved CFMP from ADM was only obtained in the case of 5.0 mg ADM in 1.0 ml solution B. These conditions will be used in liquid chromatography experiments, the results of which will be reported later.

---

Quantitative Aspekte zweier Verfahren für das Auflösen kollagenfreier Muskelproteine aus acetontrockenen Pulvern der Gelderschen Rauchwurst

Zusammenfassung Der Zweck dieser Untersuchungen ist, die experimentellen Bedingungen für die vollstän-dige Löslichkeit des kollagenfreien Muskelproteins (CFMP) aus dem Acetonpulver der Gelderschen Rauchwurst zu finden. Durch Vorversuche wurde die beste Arbeitsweise für das Zubereiten des Acetonpulvers gewählt. Zwei verschiedene Extraktionsverfahren mit zerkleinertem Wurstmaterial wurden miteinander verglichen. Die Methode mit der Acetontrockenmasse (ADM) mittels kontinuierlicher Extraktion [2] führte zu besseren Ergebnissen als die Methode mit Acetonpulver (ACP), wozu ein Mischgerät [1] verwendet wurde. Die ADM-Methode wurde für weitere Untersuchungen angewendet. ADM wurde mit zwei verschiedenen Extraktionslösungen von Natrium-Dodecylsulfat (SDS) (A und B) extrahiert. Lösung A enthalt einen Tris-Borsäure Puffer (pH 8,2) mit SDS (1,5%) und Dithioerithritol (0,05%) [3]. Die Lösung B enthält einen Borat-Salzsäure Puffer (pH 9,0) mit SDS (2,0%) und Mercapto-Ethanol (1,0%) [2]. Beide Extraktionslösungen zeigen ein lineares Verhalten zwischen den Mengen vom CFMP in ADM und in aufgelöstem CFMP. Diese Linearität wurde von 10,030,0 mg ADM (Lösungsmittel A) und von 5,030,0 mg ADM (Lösungsmittel B) gefunden. Die Lös-lichkeit in Lösung B ist gegeniiber Lösung A besser. Ein vollständig gelöstes CFMP aus ADM wurde nur bei der Extraktion von 5,0 mg ADM in 1,0 ml der Losung B erhalten. Diese Bedingung soll in unseren künftigen flüssigchromatographischen Experimenten verwendet werden.

---

---

Supported by a grant from the Hoofdinspectie Levensmiddelen of the Ministry of Welzijn, Volksgezondheid en Cultuur     

Forward dynamical analysis of flexible multibody systems using system-level model reduction

Fast simulation (e.g., real-time) of flexible multibody systems is typically restricted by the presence of both differential and algebraic equations in the model equations, and the number of degrees of freedom required to accurately model flexibility. Model reduction techniques can alleviate the problem, although the classically used body-level model reduction and general-purpose system-level techniques do not eliminate the algebraic equations and do not necessarily result in optimal dimension reduction. In this research, Global Modal Parametrization, a model reduction technique for flexible multibody systems is further developed to speed up simulation of flexible multibody systems. The reduction of the model is achieved by projection on a curvilinear subspace instead of the classically used fixed vector space, requiring significantly less degrees of freedom to represent the system dynamics with the same level of accuracy. The numerical experiment in this paper illustrates previously unexposed sources of approximation error: (1) the rigid body motion is computed in a forward dynamical analysis resulting in a small divergence of the rigid body motion, and (2) the errors resulting from the transformation from the modal degrees of freedom of the reduced model back to the original degrees of freedom. The effect of the configuration space discretization coarseness on the different approximation error sources is investigated. The trade-offs to be defined by the user to control these approximation errors are explained.     

Arthemis: annotation software in an integrated capturing and analysis system for colonoscopy

Colonoscopy is an endoscopic technique that allows physicians to inspect the inside of the human colon. During a colonoscopic procedure, a tiny video camera at the tip of the endoscope generates a video signal of the internal mucosa of the colon. In current practice, the entire colonoscopic procedure is not routinely captured. Software tools providing easy access to important contents of videos that are digitally captured during colonoscopy are not available. Hence, it is very time consuming to review an entire video, locate important contents, annotate them, and extract the annotated contents for research, teaching, and training purposes. Arthemis, a software application, was developed to facilitate this process. For convenient data sharing, Arthemis allows annotation according to the European Gastrointestinal Society for Endoscopy (ESGE) Minimal Standard Terminology (MST), an internationally accepted standard for digestive endoscopy. Arthemis is part of our integrated capturing and content analysis system for colonoscopy called Endoscopic Multimedia Information System (EMIS). This paper presents Arthemis as a component of EMIS, the design and implementation of Arthemis, and key lessons learned from the development process.     

A neural network for predicting the stability of RNA/DNA hybrid duplexes

A back propagation (BP) neural network (NN) method has been developed to predict the stability of RNA/DNA duplex. Calculated T_m of hybrid formation with the present parameters fits the experimental values within reasonable errors (AD=1.2887 K, SEP=1.782, R²=0.9673 for NN1; AD=2.1388 K, SEP=3.506, R²=0.8889 for NN2). And it has the advantage that the determinations of thermodynamic parameters (TP) are not needed.     

Alphabetic search: Comment on Klahr, Chase, and Lovelace (1983).

Response time (RT) curves were obtained from Ss who were instructed to search for following or preceding letters in the alphabet with respect to given stimulus letters. To describe the shape of these curves, D. Klahr et al (see record 1984-05777-001) proposed a search model. It was assumed that the alphabet was internally represented by a number of chunks of a few letters. Klahr et al assumed that serial searches occurred along 2 hierarchical levels: (1) a search for the correct chunk and (2) a search of the letters within the chunk. The Klahr et al model predicted an ascending sawtooth-shaped RT curve. However, according to the authors' analysis of the data, the RT curves did not show the expected sawtooth shapes. In order to find out whether the lack of empirical support for the model was an artifact of averaging the data, the experiment was replicated. It was found that individual RT curves did not show the shape characteristics that were predicted by the Klahr et al model either. The data supported the hypothesis that the access of letters was direct without any hierarchy, and that the retrieval of successive letters was determined by the variable associations between subsequent letters. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

SAPPHIRE: A toolkit for building efficient stream programs for medical video analysis

This paper describes the design and implementation of SAPPHIRE – a novel middleware and software development kit for stream programing on a heterogeneous system of multi-core multi-CPUs with optional hardware accelerators such as graphics processing unit (GPU). A stream program consists of a set of tasks where the same tasks are repeated over multiple iterations of data (e.g., video frames). Examples of such programs are video analysis applications for computer-aided diagnosis and computer-assisted surgeries. Our design goal is to reduce the implementation efforts and ease collaborative software development of stream programs while supporting efficient execution of the programs on the target hardware. To validate the toolkit, we implemented EM-Automated-RT software with the toolkit and reported our experience. EM-Automated-RT performs real-time video analysis for quality of a colonoscopy procedure and provides visual feedback to assist the endoscopist to achieve optimal inspection of the colon during the procedure. The software has been deployed in a hospital setting to conduct a clinical trial.