Network traffic classification via HMM under the guidance of syntactic structure

Network traffic classification is the basis of many network technologies including intrusion detection, traffic scheduling, and quality of service. Given the limitations of existing classification approaches based on the port number, the packet-payload and statistical characteristics of network traffic, in this paper we propose a novel classification method via a hidden Markov model. With the analysis about the time series characteristics and statistical properties of network traffic, we use a hidden Markov model to model for a type of traffic under the guidance of syntactic structure of it. And then a classification approach is presented based on the model. Experiment results on several typical network applications indicate that the combination of time series characteristics and the statistical properties not only make the established model more precise, but also improve the accuracy of network traffic classification.     

Learning-enhanced differential evolution for numerical optimization

Differential evolution (DE) is a simple and powerful population-based search algorithm, successfully used in various scientific and engineering fields. However, DE is not free from the problems of stagnation and premature convergence. Hence, designing more effective search strategies to enhance the performance of DE is one of the most salient and active topics. This paper proposes a new method, called learning-enhanced DE (LeDE) that promotes individuals to exchange information systematically. Distinct from the existing DE variants, LeDE adopts a novel learning strategy, namely clustering-based learning strategy (CLS). In CLS, there are two levels of learning strategies, intra-cluster learning strategy and inter-cluster learning strategy. They are adopted for exchanging information within the same cluster and between different clusters, respectively. Experimental studies over 23 benchmark functions show that LeDE significantly outperforms the conventional DE. Compared with other clustering-based DE algorithms, LeDE can obtain better solutions. In addition, LeDE is also shown to be significantly better than or at least comparable to several state-of-art DE variants as well as some other evolutionary algorithms.     

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining was carried out to investigate microfracture, residual damage, and surface roughness associated with material removal and surface generation. Brittle versus plastic deformation was studied using Vickers indention and nano-indentation. To characterize the abrasive machining response, the 6H-SiC (0001) substrates were ground using diamond wheels with grit sizes of 25, 15 and 7 μm, and then polished with diamond suspensions of 3 and 0.05 μm. It is found that in indentation, there was a scale effect for brittle versus plastic deformation in 6H-SiC substrates. Also, in grinding, the scales of fracture and surface roughness of the substrates decreased with a decrease in diamond grit size. However, in polishing, a reduction in grit size of diamond suspensions gave no significant improvement in surface roughness. Furthermore, the results showed that fracture-free 6H-SiC (0001) surfaces were generated in polishing with the existence of the residual crystal defects, which were associated with the origin of defects in single crystal growth.     

基于电-热场耦合的35kV电缆中间接头气隙缺陷仿真分析

为了研究电缆接头在不同尺寸空气楔形间隙下的运行性能,本文采用有限元计算方法,设计35kV电缆接头精细化模型,计算电缆接头在发生单相短路故障时的电场和温度分布.结果表明,电缆接头内的空气间隙电场强度集中,绝缘层存在劣化隐患.随着空气间隙长度的增加,气隙内最大电场强度逐渐增大;随着空气间隙深度的增大,气隙内最大电场强度呈先减小后增大的变化规律;气隙内热量的积聚会进一步造成绝缘层的老化.最后,根据现场实际缺陷案例,提出风险预控和防治措施.     

Study on heat conduction and adsorption/desorption characteristic of MIL-101/few layer graphene composite

Journal of Porous Materials - Aiming at the poor heat conduction performance of porous MIL-101 applied in adsorption cooling process, few layer graphene (FLG) was selected as a promising thermal...     

致密油藏直井多层缝网压裂产量递减分析

垂向多层发育的致密油藏常采用缝网压裂进行开采,从而改善储层渗透率,提高油井产量。为此建立直井多层缝网压裂不稳定渗流数学模型,压裂后各层划分为人工裂缝区、改造区和未改造区。绘制分析Blasingame产量递减典型曲线,曲线分为7个流动阶段,总裂缝长度一定时,裂缝半长短的储层流体渗流率先到达未改造区,流体渗流阻力大,Blasingame曲线靠下;总改造体积一定时,各层改造体积差异越大,Blasingame曲线越靠下。用所建立的模型,对实测生产资料进行解释,获得各层裂缝半长、改造区渗透率等相关地层参数,该模型对进行多层缝网压裂直井产量分析具有指导意义。     

花斑无须鲶(Ageneiosus marmoratus)全基因组微卫星分布特征研究

根据NCBI已公布的花斑无须鲶全基因组序列,利用MISA软件对花斑无须鲶全基因组的6种完整型微卫星进行筛选并分析其分布特征. 结果如下:在花斑无须鲶全基因组(约1.03Gb)中符合条件的微卫星序列共336 037个,丰度为326个/Mb. 微卫星总长度为7 720 686 bp,占花斑无须鲶全基因组的0.75%. 其中二碱基类型的微卫星数目最多,为145 318个,占微卫星总数的43.24%,其次分别为单碱基(37.12%)、三碱基(11.00%)、四碱基(7.39%)、五碱基(1.04%)和六碱基(0.21%). 花斑无须鲶全基因组微卫星中的优势碱基类别按照数量从高到低排列依次为A、AC、AG、AT、AAT、AAAT、TATC、AAG、AAC和TGA,共有305 243个,占微卫星总数的 90.84%,A、T碱基在微卫星中占绝对优势.     

压力容器缺陷检测及补焊修复

本文对不同种类、结构、工作条件、制造质量压力容器的缺陷检测处理和现场补焊修复的原则和工艺作了详细的叙述。     

管线用钢氢致裂纹(HIC)影响因素分析

研究了管线用钢的化学成分和金相组织对钢的氢致裂纹(HIC)性能的影响。研究认为,带状组织和马氏体含量对HIC性能有很大影响,S含量及Cep对HIC有不同程度影响。含有少量Cu、Ni的钢更适合在酸性环境下使用。     

MICROSTRUCTURE AND MECHANICAL BEHAVIOUR OF Al-Li-Zr AND Al-Li-Cu-Mg-Zr ALLOYS

The aging response,tensile and impact properties of two kinds of Al-Li based alloys havebeen studied.The microstructure,deformation as well as fracture behaviour in the alloys wereobserved with SEM and TEM.It was found that the mechanisms of deformation and fracturefor different heat-treated alloys with the same chemical composition are quite different.Thecauses leading to the drop of ductility,toughness as well as anisotropy in peak-aged alloyshave been analysed.Finally,possible methods to improve the ductility and toughness of the al-loys have been discussed.