Zinc Favors Triple-Negative Breast Cancer’s Microenvironment Modulation and Cell Plasticity

Triple-negative breast cancer (TNBC) tends to metastasize to the brain, a step that worsens the patient’s prognosis. The specific hallmarks that determine successful metastasis are motility and invasion, microenvironment modulation, plasticity, and colonization. Zinc, an essential trace element, has been shown to be involved in all of these processes. In this work, we focus our attention on the potential role of zinc during TNBC metastasis. We used MDA-MB-BrM2 (BrM2) cells, a brain metastasis model derived from the parental TNBC cell line MDA-MB-231. Our studies show that BrM2 cells had double the zinc content of MDA-MB-231 cells. Moreover, exploring different metastatic hallmarks, we found that the zinc concentration is especially important in the microenvironment modulation of brain metastatic cells, enhancing the expression of SerpinB2. Furthermore, we show that zinc promotes the tumorigenic capacity of breast cancer stem cells. In addition, by causing a disturbance in MDA-MB-231 zinc homeostasis by overexpressing the Zip4 transporter, we were able to increase tumorigenicity. Nevertheless, this strategy did not completely recapitulate the BrM2 metastatic phenotype. Altogether, our work suggests that zinc plays an important role in the transformative steps that tumoral cells take to acquire tumorigenic potential and niche specificity.     

Effect of enterocin AS-48 in combination with high-intensity pulsed-electric field treatment against the spoilage bacterium Lactobacillus diolivorans in apple juice

Enterocin AS-48 was tested in apple juice against the cider-spoilage, exopolysaccharide-producing strain Lactobacillus diolivorans 29 in combination with high-intensity pulsed-electric field (HIPEF) treatment (35 kV/cm, 150 Hz, 4 μs and bipolar mode). A response surface methodology was applied to study the bactericidal effects of the combined treatment, with AS-48 concentration and HIPEF treatment time as process variables. At subinhibitory bacteriocin concentrations, microbial inactivation by the combined treatment increased as the bacteriocin concentration and the HIPEF treatment time increased (from 0.5 to 2.0 μg/ml and from 100 to 1000 μs, respectively). Highest inactivation (4.87 logs) was achieved by 1000 μs HIPEF treatment in combination with 2.0 μg/ml AS-48. While application of treatments separately did not protect juice from survivors during storage, survivors to the combined treatment were inactivated within the following 24 h of storage, and the treated samples remained free from detectable lactobacilli for at least 15 days at temperatures of 4 °C as well as 22 °C. The combined treatment could be useful for inactivation of exopolysaccharide-producing L. diolivorans in apple juice.     

Evaluation of chemical and physical (high-pressure and temperature) treatments to improve the safety of minimally processed mung bean sprouts during refrigerated storage

The objective of this study was to compare the effects of combined high hydrostatic pressure and temperature treatments with different chemical sanitation treatments (water, sodium hypochlorite, and hydrogen peroxide) on the microbiological properties of mung bean sprouts. In a first study, the raw product was subjected to several combined high-pressure and temperature treatments for calculating a mathematical model by a response surface methodology. The number of pressure-temperature (150 to 400 MPa; 20 to 40 degrees C) combinations was limited to 10. In addition, a model system consisting of mung bean sprout juice was inoculated with Listeria monocytogenes (CECT 4032). Microbial inactivation with this model system was also investigated by a response surface methodology. The highest aerobic mesophilic bacteria and L. monocytogenes inactivation was achieved at maximum pressure and temperature (5.5 and 1.8 log cycles, respectively). In a second study, the effect of five different processing lines on the microbial load reduction of minimally processed mung bean sprouts during refrigerated storage was studied. All treatments reduced the initial population of aerobic mesophilic bacteria and fecal coliforms, with the physical treatment of 400 MPa and 40 degrees C being the most effective, showing initial reductions of 5.8 and 7.8 log CFU/ g, respectively. Recovery of bacteria from sprouts treated under these conditions was not observed during storage. However, the sprouts that received washing treatments with water, sodium hypochlorite, and hydrogen peroxide exhibited increases in aerobic mesophilic and fecal coliform counts after 3 days of storage at 4 degrees C.     

Effect of high-pressure treatment on the survival of Listeria monocytogenes Scott A in sliced vacuum-packaged Iberian and Serrano cured hams

High-pressure treatment is useful for increasing the microbiological safety of ready-to-eat foods. With dry-cured hams, this treatment can be applied to the finished product after slicing and vacuum packaging. The effect of high-pressure treatment on the survival of inoculated Listeria monocytogenes Scott A and on the sensory characteristics of two Spanish dry-cured hams, Iberian and Serrano, was investigated. Ham slices were inoculated with L. monocytogenes at 6 x 10(6) CFU/g and held at 4 degrees C for 20 h before high-pressure treatment. During this holding period, the population of the pathogen declined by 0.44 and 0.51 log CFU/g in Iberian and Serrano hams, respectively. Treatment at 450 MPa for 10 min at 12 degrees C reduced L. monocytogenes populations by 1.50 and 1.16 log CFU/g in Iberian and Serrano hams, respectively. During the first week of storage at 4 or 8 degrees C, L. monocytogenes populations declined by an average 0.89 log CFU/g in pressurized Iberian ham and 2.09 log CFU/g in pressurized Serrano ham. After 60 days at 4 or 8 degrees C, the respective populations in pressurized and control hams were 3.24 and 4.70 log CFU/g for Iberian ham and 2.73 and 5.07 log CFU/g for Serrano ham. The color parameters L* and a* were not influenced by high-pressure treatment, and parameter b* was increased only in Iberian ham. Sensory characteristics of hams were not affected by high-pressure treatment. Treatment of Iberian and Serrano hams at 450 MPa for 10 min significantly reduced the population of L. monocytogenes Scott A without a detrimental effect on the sensory characteristics of the hams.     

Predicting heat inactivation of Staphylococcus aureus under nonisothermal treatments at different pH

The aim was to assess whether heat resistance data obtained from isothermal treatments allow the estimation of survivors of Staphylococcus aureus under nonisothermal conditions and to find a model that accurately predicts its heat inactivation at constantly rising heating rates (0.5-9 degrees C/min) in media of different pH (4.0-7.4). S. aureus showed a higher heat resistance under isothermal treatments at pH 4.0 than at pH 5.5-7.4. However, under nonisothermal treatments S. aureus increased its heat resistance at pH 5.5-7.4 and became more thermotolerant than at pH 4.0. Estimations of survival curves under nonisothermal treatments obtained from heat resistance parameters of isothermal treatments did not adequately fit experimental values. Whereas the number of survivors was much higher than estimated at pH 5.5-7.4, that obtained at the slower heating rates at pH 4.0 was lower. An equation based on the Weibullian-like distribution (log10 S(t) = (t/delta)p) accurately described survival curves obtained under nonisothermal conditions. A nonlinear relationship was observed among the scale parameter (delta) and the heating rate which allowed the development of two equations capable of predicting the inactivation rate of S. aureus under nonisothermal treatments. This study might contribute to prevent public health risks in foods requiring long heating lag phases during their processing.     

Components distribution in Cu(In,Ga)Se<Subscript>2</Subscript> films prepared by selenization of evaporated metallic precursors on bare and ITO-coated glass substrates

Cu(In,Ga)Se₂ thin films have been prepared by selenization of the evaporated metallic precursors on transparent and conductive ITO-coated as well as uncoated glass substrates, by starting from slightly Cu-rich or Cu-poor overall metallic proportions. The objective is to determine the influence of the Cu availability on the constituents distribution achieved after selenization, by means of data obtained at several film depths by grazing incidence X-ray diffraction and X-ray photoelectron spectroscopy that have been related to the overall optical and structural characteristics of the material. This study points out the possibility of achieving homogeneous or graded absorber layers, showing for homogeneous samples an ITO/Cu(In,Ga)Se₂ interface with ohmic electrical characteristics suitable to act as back contact for semitransparent photovoltaic devices.     

pH-sensitive capsules as intracellular optical reporters for monitoring lysosomal pH changes upon stimulation

The concept of a long-term sensor for ion changes in the lysosome is presented. The sensor is made by layer-by-layer assembly of oppositely charged polyelectrolytes around ion-sensitive fluorophores, in this case for protons. The sensor is spontaneously incorporated by cells and resides over days in the lysosome. Intracellular changes of the concentration of protons upon cellular stimulation with pH-active agents are monitored by read-out of the sensor fluorescence at real time. With help of this sensor concept it is demonstrated that the different agents used (Monensin, Chloroquine, Bafilomycin A1, Amiloride) possessed different kinetics and mechanisms of action in affecting the intracellular pH values.     

Simulation of an enhanced flat-plate solar liquid collector with wire-coil insert devices

Solar liquid collectors are potential candidates for enhanced heat transfer, but there are just a few studies focused on this topic. However, enhancement techniques can be applied to thermal solar collectors to produce more compact and efficient designs. This work presents the study of heat transfer enhancement in a tube-on-sheet solar panel with wire-coil inserts, using TRNSYS as the simulating tool. The numerical simulation methodology predicts the thermohydraulic flow behaviour of enhanced and standard tube-on-sheet solar collectors, evaluating the local losses, friction coefficients and Nusselt numbers as functions of the operating parameters. The standard and the enhanced collectors have been simulated under the same ambient, radiant and operating conditions. The standardized efficiency curves according to the standard UNE-EN 12975-2 are provided. The enhanced collector increases the thermal efficiency values by 4.5%. A parametric study was performed to relate the fluid and flow characteristics with the heat transfer enhancement by wire-coil inserts. The simulations were performed for different working fluids (water and propylene glycol/water mixtures) in a mass flow rate range from 15 to 120 l/h m².     

In-band optical signal-to-noise ratio monitoring method based on high-resolution polarization analysis and induced differential group delay

We report on an in-band optical signal-to-noise ratio monitoring technique for wavelength division multiplexed channels. Our proposal relies on the different degree of polarization between the signal (highly polarized) and the noise (not polarized). Using this principle, we divide the signal under test into two orthogonal polarization components and induce a differential group delay via a controlled birefringence apparatus that produces a wavelength-dependent shift of the polarization state of the signal. After a linear polarizing filter, high-resolution spectral analysis allows measurement of the amplified spontaneous emission noise level. The method is tested by experimental measurements of a 40 Gbit/s differential phase-shift keying channel showing very good performance.