Evaluation of the mechanical behavior of W7-X central support connections by means of semi-automated FE analysis

The stellarator Wendelstein 7-X is under construction at the Max-Planck-Institut für Plasmaphysik in Greifswald. Its superconducting coil system is fixed by a massive structure. During machine operation the coils exert high forces and moments against each other and the central support structure (CSS). Therefore, the detailed analysis of the coil to CSS connections, the so-called central support elements (CSE), is a critical item. The major details of the design have been frozen; nevertheless, there is still need for detailed analysis of the CSEs due to assembly issues, and later on for exploring operational limits of the machine. These analyses have to be performed quickly, reliably, and shall provide results in a standardized form to enable timely responses to the assembly team. Special numerical tools – finite element (FE) parametric models of CSEs – have been developed for the purpose of such analyses. In the models, the geometry, material properties, contact conditions, loads as well as results presentation are defined in a parametric way. The use of the developed models for the definition of the final weld parameters, bolt preloads, assessment of acceptable tolerances, and optimal positions of the CSE-wedges before welding is also discussed.     

Surface effects and flow conditions in small volume melts with varying sulphur content

The surface effects and flow behaviour in melts with a volume of a few cubic millimetres were investigated using 1 mm thick X5CrNi18‐9 (AISI 304) stainless steel strips after partial remelting by a TIG (tungsten inert gas) burner. In the industrially produced material the S mass content was varied between 20 and 100 ppm. The surface excess of sulphur indicates that the surface saturation was not achieved compared to the values in the Fe‐S system. The thickness of the layer with high sulphur enrichment depends on the S activity and varied between approximately 260 and 460 nm and achieves the bulk S content at a distance of approximately 1.2 μm from the surface. This layer is noticeably thinner than the diffusion boundary layer and considerably thinner than the flow boundary layer. The topography of the rapidly solidified liquid pool makes it possible, taking previously estimated temperature coefficients of surface tension into account, to explain the flow behaviour in the melt with regard to the S content and to the temperature gradients. The results obtained indicate that the shearing force caused by surface tension gradients (Marangoni effect) controls the flow conditions in small volume melts.     

Passivation of pinhole defect microelectrode arrays in ultrathin silica films immobilized on gold substrates

Nanoscopic defects present in ultrathin (~ 6 nm) silica films covalently attached to gold substrates through a gold oxide layer exhibit a voltammetric response consistent with a random array of ultramicroelectrodes. These pinholes can be passivated via electrochemical polymerization of phenol to create insulating poly(phenylene) oxide plugs as documented by atomic force microscopy and infrared reflectance-absorbance spectroscopy. Passivation of pinholes is ~ 99.5% complete after 550 voltammetric cycles of oxidative electropolymerization.     

A comparison of the multistep consecutive reduction mode with the multicomponent system reduction mode in cyclic voltammetry

The multistep consecutive ECE-ECE reduction process A(e)-->B(k(f2))-->C(e)-->D(e)-->E(k(f2))-->F(e)-->G has been compared with reduction in multicomponent system A(e)-->B, C(e)-->D, D(e)-->E, F(e)-->G. A simple method of transformation has been devised to disclose the subtle structure of the complex cyclic voltammetry (CV) responses and illustrated by the ECE-ECE process modeled earlier. The method can be applied to any multi-electron CV experimental curve for which a numerical modeling has been done. Electroreduction processes similar to those considered here are often met in practice. An attempt of unification of consecutive electroreduction and electroreduction of multicomponent system has been made. Interrelation between research and analytical voltammetry aspects of the problem is also discussed.     

Minimizing the Average Cost of Testing Coherent Systems: Complexity and Approximate Algorithms

The paper deals with the problem of finding optimal testing policy to minimize the average cost of determining the state of a s-coherent system. Computational complexity of this problem is analysed and strong evidence presented that an exact, polynomial-time, algorithm is very unlikely to exist. Instead, three approximate algorithms having polynomial running times are suggested and evaluated. Two of them guarantee reasonably good solutions and might be practical.     

The analog of the Kanazawa-Gordon formula for cylindrical resonators

In this paper, a formula relating the shift in the resonant frequency of a shear piezoceramic cylindrical resonator to the viscosity of a Newtonian liquid that loads the resonator surface was established. This formula is analogous to the classical Kanazawa-Gordon formula that describes the change in the resonant frequency of a shear planar resonator loaded with a Newtonian liquid. To this end, the author applied the perturbation method to analyze the behavior of the piezoceramic cylindrical resonators vibrating in a shear mode and loaded with a viscous liquid. The shift in resonant frequency obtained using the perturbation method (mechanical model) was compared to an exact value of the shift in resonant frequency obtained from the complete electromechanical model (admittance diagrams) that describes shear vibrations of a piezoceramic cylindrical resonator loaded with a viscous liquid. Good conformity between the two types of results obtained can prove the correctness of the analytical formulas established in this paper. The results of this work can be applied for the design and construction of viscosity sensors.     

Organotin compounds in the liver tissue of marine mammals from the Polish coast of the Baltic Sea

Butyltins (BTs) and phenyltins (PhTs) were determined in the livers of marine mammals found by-caught or stranded along the Polish coast of the Baltic Sea. During the investigation an original analytical method was developed. Butyltin compounds were detected in all the liver samples, whereas phenyltins were not detected in any of the samples. The total concentrations of BTs ranged from 43.9 to 7698 ng(Sn) x g(-1) dry weight. Age-related trends to accumulate BTs in immature porpoises were found. At the same time there were no male-female differences in BTs concentrations observed. No statistically significant spatial distribution differences were found between the locations corresponding to the open Baltic Sea waters and inside the Gulf of Gdańsk, which is characterized by high maritime activity. In comparison to butyltin levels in marine mammals from other geographic regions, the samples analyzed indicate a significant degree of tributyltin pollution along the Polish coast of the Baltic Sea. On the basis of a literature review, higher BT levels are usually found in waters close to highly industrialized areas, such as Japan, Hong Kong, and the United States.     

Importance and reduction of the sidewall-induced band-broadening effect in pressure-driven microfabricated columns

The influence of the detailed design of the sidewall region upon the over-all band-broadening in microfabricated packed-bed or collocated monolithic support structure (COMOSS) columns has been investigated using computational fluid dynamics (CFD) simulation techniques. It is shown that, under unretained solute conditions, very small structural variations of the order of only 5% of the particle diameter can give rise to a 4-fold increase of the band-broadening. A comprehensive study has been made to quantify this effect as a function of the fluid velocity, the particle diameter, the channel widths, and of course, the sidewall region design. Because the sidewall effect can be fully attributed to a mismatch between the flow rates in the column center and in the sidewall region, it is fortunately also quite straightforward to avoid it. A very simple design, yielding band-broadening values identical to that of a hypothetical sidewall-less column for all possible values of the flow velocity, the particle diameter, or the channel width is proposed.     

Evidence Theory and VPRS model

The Rough Set Theory (RST) was proposed by Pawlak [4] as a new mathematical approach to deal with uncertain knowledge in expert systems. In 1991 Ziarko [11] proposed the Variable Precision Rough Set Model (VPRSM) as a certain extension of the rough set theory. VPRSM approach makes it possible to use a certain level of misclassification.The aim of this paper is to introduce belief and plausibility functions defined by the β-approximation regions. On the basis of the β-approximation regions, the β-basic probability assignment is defined and the Dempster's combination rule for product of two decision tables is constructed. This entire approach is illustrated by examples.