Kinetics of hillock growth in Al and Al-alloys

Hillock growth kinetics and size distribution were investigated in Al, Al:Si 1% and Al:Si1%:Cu 0.5% layers. Metallization surface was examined by optical, SEM and TEM microscopy, stylus profiling and an automatic method of hillock recognition from a microscope image. The method allowed for counting hillocks in a desired range of their diameter d. Surface density of hillocks was measured as a function of time of furnace annealing at 400°C and as a function of temperature of RTP annealing. A maximum hillock size was found to increase linearly with metallization layer thickness and with logarithm of annealing time. A total area occupied by hillocks was evaluated. Hillock density decreased versus 1/T with an activation energy of 0.28 eV for Al and 0.31 eV for Al:Si. It was found, that a normalized hillock density N may be expressed by a formula N=N₀ exp(−cd). Values for N₀ and c are given together with a short discussion.     

A 640 by 480 Pixels Readout Circuit for IR Imaging

A readout circuit for a 640 × 480 pixels FPA (focal plane array) has been successfully designed, fabricated and tested. The circuit solution is based on a per pixel source-follower direct injection (SFDI) pre-amplifier. Signal multiplexing is performed in both X and Y direction. The pixel size is 25 m × 25m. The chip is optimized for a QWIP (quantum well infrared photodetector) operating at a temperature of 70 K. The circuit has been realized in a standard 0.8 m CMOS process.     

Hydrogen‐Bonded Polyimide/Metal‐Organic Framework Hybrid Membranes for Ultrafast Separations of Multiple Gas Pairs

Membranes have seen a growing role in mitigating the extensive energy used for gas separations. Further expanding their effectiveness in reducing the energy penalty requires a fast separation process via a facile technique readily integrated with industrial membrane formation platforms, which has remained a challenge. Here, an ultrapermeable polyimide/metal‐organic framework (MOF) hybrid membrane is reported, enabling ultrafast gas separations for multiple applications (e.g., CO₂ capture and hydrogen regeneration) while offering synthetic enhanced compatibility with the current membrane manufacturing processes. The membranes demonstrate a CO₂ and H₂ permeability of 2494 and 2932 Barrers, respectively, with a CO₂/CH₄, H₂/CH₄, and H₂/N₂ selectivity of 29.3, 34.4, and 23.8, respectively, considerably surpassing the current Robeson permeability–selectivity upper bounds. At a MOF loading of 55 wt%, the membranes display a record‐high 16‐fold enhancement of H₂ permeability comparing with the neat polymer. With mild membrane processing conditions (e.g., a heating temperature less than 80 °C) and a performance continuously exceeding Robeson upper bounds for over 5300 h, the membranes exhibit enhanced compatibility with state‐of‐the‐art membrane manufacturing processes. This performance results from intimate interactions between the polymer and MOFs via extensive, direct hydrogen bonding. This design approach offers a new route to ultraproductive membrane materials for energy‐efficient gas separations.     

Single-Cell Microgels for Diagnostics and Therapeutics

Cell encapsulation within hydrogel droplets is transforming what is feasible in multiple fields of biomedical science such as tissue engineering and regenerative medicine, in vitro modeling, and cell-based therapies. Recent advances have allowed researchers to miniaturize material encapsulation complexes down to single-cell scales, where each complex, termed a single-cell microgel, contains only one cell surrounded by a hydrogel matrix while remaining <100 μm in size. With this achievement, studies requiring single-cell resolution are now possible, similar to those done using liquid droplet encapsulation. Of particular note, applications involving long-term in vitro cultures, modular bioinks, high-throughput screenings, and formation of 3D cellular microenvironments can be tuned independently to suit the needs of individual cells and experimental goals. In this progress report, an overview of established materials and techniques used to fabricate single-cell microgels, as well as insight into potential alternatives is provided. This focused review is concluded by discussing applications that have already benefited from single-cell microgel technologies, as well as prospective applications on the cusp of achieving important new capabilities.     

Pressure‐Tunable Ambipolar Conduction and Hysteresis in Thin Palladium Diselenide Field Effect Transistors

Few‐layer palladium diselenide (PdSe₂) field effect transistors are studied under external stimuli such as electrical and optical fields, electron irradiation, and gas pressure. The ambipolar conduction and hysteresis are observed in the transfer curves of the as‐exfoliated and unprotected PdSe₂ material. The ambipolar conduction and its hysteretic behavior in the air and pure nitrogen environments are tuned. The prevailing p‐type transport observed at atmospheric pressure is reversibly turned into a dominant n‐type conduction by reducing the pressure, which can simultaneously suppress the hysteresis. The pressure control can be exploited to symmetrize and stabilize the transfer characteristics of the device as required in high‐performance logic circuits. The transistors are affected by trap states with characteristic times in the order of minutes. The channel conductance, dramatically reduced by the electron irradiation during scanning electron microscope imaging, is restored after an annealing of several minutes at room temperature. The work paves the way toward the exploitation of PdSe₂ in electronic devices by providing an experiment‐based and deep understanding of charge transport in PdSe₂ transistors subjected to electrical stress and other external agents.     

Comb-Push Ultrasound Shear Elastography (CUSE): A Novel Method for Two-Dimensional Shear Elasticity Imaging of Soft Tissues

Fast and accurate tissue elasticity imaging is essential in studying dynamic tissue mechanical properties. Various ultrasound shear elasticity imaging techniques have been developed in the last two decades. However, to reconstruct a full field-of-view 2-D shear elasticity map, multiple data acquisitions are typically required. In this paper, a novel shear elasticity imaging technique, comb-push ultrasound shear elastography (CUSE), is introduced in which only one rapid data acquisition (less than 35 ms) is needed to reconstruct a full field-of-view 2-D shear wave speed map (40 × 38 mm). Multiple unfocused ultrasound beams arranged in a comb pattern (comb-push) are used to generate shear waves. A directional filter is then applied upon the shear wave field to extract the left-to-right (LR) and right-to-left (RL) propagating shear waves. Local shear wave speed is recovered using a time-of-flight method based on both LR and RL waves. Finally, a 2-D shear wave speed map is reconstructed by combining the LR and RL speed maps. Smooth and accurate shear wave speed maps are reconstructed using the proposed CUSE method in two calibrated homogeneous phantoms with different moduli. Inclusion phantom experiments demonstrate that CUSE is capable of providing good contrast (contrast-to-noise ratio ≥ 25 dB) between the inclusion and background without artifacts and is insensitive to inclusion positions. Safety measurements demonstrate that all regulated parameters of the ultrasound output level used in CUSE sequence are well below the FDA limits for diagnostic ultrasound.     

Determination of electrical and mechanical parameters in capacitive MEMS accelerometers using electrical measurements

This paper describes a simple technique for characterization of capacitive MEMS accelerometers. The method is based on electrical impedance (admittance) measurements of capacitive MEMS accelerometers treated as electrostatically-driven microelectromechanical resonators. By using this method, it is possible to determine some electrical and mechanical parameters including the shunt capacitance, the mechanical resonance frequency and quality factor. These parameters may serve as measures of structural integrity of the tested structures and their packages during reliability testing, for instance.     

用户身份管理策略研究

In recent years there has been a fast grow of various electronic services.Each service requires specif-ic credentials for authenticating and authorizing user ac-cess or specific subset of user's personal information for transactions the service offers.Such a situation causes problems with remembering multiple,service-specific authentication data,with controlling user's personal data spread across different services-problems with managing user's identities.This paper is an overview on Identity Management(IdM...     

Wavelet decomposition of cardiovascular signals for baroreceptor function tests in pigs

In this paper, the discrete wavelet transform (DWT) was applied to analyze the fluctuations in RR interval and systolic arterial pressure (SAP) recorded from eight alpha-chloralose anesthetized pigs. Our aim was to characterize the autonomic modulation before and after cardiac autonomic blockade and during baroreflex function tests. The instantaneous power of decomposed low-frequency (LF) and high-frequency (HF) components was used for a time-variant spectral analysis. Our results suggested that transient events and changes in autonomic modulation were detected with high temporal resolution. A nonlinear relationship between RR interval and SAP during pharmacologically induced changes in blood pressure was found, when the superimposed effect of respiratory sinus arrhythmia was removed. In addition, the baroslopes were nearly linear when both the LF and HF components were removed using DWT decomposition.