Hot metal pretreatment by powder injection of lime‐based reagents

A mathematical model earlier proposed has been improved to predict the kinetics of multicomponent reactions in the hot metal pretreatment through the injection of reactive fluxes. It is assumed that there are two reaction zones along the flux injection operation: a transitory reaction between the rising particles and the bulk metal, and the permanent reaction between the metal and the top slag. A criterion to estimate the fraction of solids which will react with molten iron in a three‐phase jet (gas‐solid‐liquid) was considered; this fraction of solids carries out the transitory reaction. The model also takes into account the thermodynamic changes produced in the metal and slag due to the chemical reactions. Calculated results of the model are in good agreement with experimental results for the desulfurization of hot metal through the injection of CaO‐SiO₂‐CaF₂‐FeO‐Na₂O reagents at 1400 ‐ 1450 °C. Two kinds of hot metal were tested, one with a low carbon mass content of 3 % and the other with a high carbon mass content of 4.5 %.     

State Estimation in Structural Systems with Model Uncertainties

This paper presents an observer designed under the assumption that differences between predicted and measured outputs arise from discrepancies between the real structural system and the nominal model used to represent it. The observer gain is independent of the assumed model error parametrization and proves to be the transpose of the state to output matrix of a state space formulation. The estimated state with the proposed observer is shown to be identical to that obtained by exciting the nominal model with the known input while adjusting the measured portion of the state to match the measurements at the start of every step. Numerical experiments suggest that the proposed observer can provide state estimates that are substantially more accurate than results predicted by projecting the measurements in a truncated modal space.     

Within- and between-language priming differ: Evidence from repetition of pictures in Spanish-English bilinguals.

In the current study, the authors used an immediate repetition paradigm with pictures to observe whether repetition enhances word production in bilinguals. In Experiment 1, participants were asked to name pictures that were named previously in the same language (Spanish-Spanish or English-English) or in the opposite language (Spanish-English or English-Spanish). Results revealed a repetition effect both within languages and between languages. Furthermore, there was an asymmetry within language, with repetition priming being larger in Spanish than in English. Experiments 2 and 3 revealed that lag interacted with language for both within- and between-language priming. However, lag resulted in a decrease in the asymmetry for within- but not between-language priming. The results are consistent with the view that within- and between-language repetition priming are mediated by different mechanisms. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Hydrotalcite-like compounds obtained by anion exchange reactions

The synthesis of nickel aluminium hydroxypicrate, [Ni₃Al(OH)₈] (C₆O₇N₃H₂)·nH ₂O, and lithium aluminium hydroxypicrate, [Al₂Li(OH)₆] (C₆O₇N₃H₂)·nH ₂O by anion exchange is described. Picric acid and the corresponding hydroxycarbonates were used as starting materials. The new compounds were characterized by chemical analyses, electron microscopy, infrared spectroscopy and X-ray diffraction. The results obtained indicate that both are hydrotalcite-like compounds where the picrate anion lies between the basic layers. The thermal decomposition of the compounds was studied by differential thermal and thermogravimetric analysis.     

Simple, polarisation-independent, and dispersion-insensitive SCMsignal extraction technique for optical switching systems applications

A dispersion- and polarisation-insensitive all-optical method for transmitting and extracting a subcarrier multiplexed (SCM) signal using a fibre Bragg grating filter without a conventional SCM circuitry is demonstrated. Fibre transmission experiments conducted on standard singlemode fibres of varying lengths up to 80 km showed excellent sensitivity with no apparent fading effects     

Selecting Agricultural Best Management Practices for Water Conservation and Quality Improvements Using Atanassov’s Intuitionistic Fuzzy Sets

Improper agricultural practices can affect ground water through leaching, surface water through runoff, algae infestations, deforestation, and air quality through burning operations and ammonia emissions. These effects may be mitigated through the institution of best management practices. The utility of best management practices (BMPs) is recognized and being actively promoted by agricultural agencies; however, identifying a set of mandatory BMPs is inappropriate given variations between climactic, demographic and geographic regions as well as differences in farming practices. In this study, a multi-criteria decision making model based on Attanassov’s Intuitionistic Fuzzy Set (A-IFS) theory is introduced and its utility to rank agricultural best management practices is illustrated using a case-study from South Texas. Implementation of the A-IFS MCDM method to the South Texas region resulted in “irrigation scheduling” being ranked as the most preferred alternative, while “brush control/management” was the least preferred. The A-IFS MCDM approach was particularly suitable for prioritizing and ranking agricultural best management practices because decision makers often tend to have both likes and dislikes with regards to specific BMPs and for a given evaluation attribute. Not only does the A-IFS MCDM method provide a single composite score to rank the BMP alternatives, but the output of the A-IFS MCDM method also includes upper and lower bounds that help identify the uncertainties in the decision making process.     

Modeling the vulcanization reaction of silicone rubber

Characterization of the vulcanization process of silicone rubber was achieved through the modeling of dynamic DSC tests. The Kissinger equation and the Kamal‐Sourour model were used to determine kinetic parameters that fit the experimental data. The technique allows for the determination of the activation energy through Kissinger's model, which is then used to mathematically determine the other five parameters for the Kamal‐Sourour model. This novel technique finds a physically meaningful activation energy. The method generates a single set of parameters that accurately models all scanning rates tested (1, 2.5, 5, and 10 K/min). Five formulations of liquid silicone rubber as well as one solid silicone rubber were tested and modeled. For each material, the models generated fitting parameters that were in agreement with the dynamic DSC scans. The models were used to compare the processing of the liquid and solid silicone rubber. The characterization of both materials demonstrates the lower processing time, temperatures, and energy consumption when processing liquid silicone rubber, as compared to processing of hard silicone rubber. POLYM. ENG. SCI., 47:675–683, 2007. © 2007 Society of Plastics Engineers.     

Thermochemical Conversion of Sewage Sludge by TGA-FTIR Analysis: Influence of Mineral Matter Added

Thermal treatments, such as combustion, gasification, and pyrolysis, have been proven to be a convenient alternative to conventional sludge disposal technologies. Today, process development implies scaling up and so improving the reactor's design. In continuously operated reactors, fresh sewage sludge is in contact with solid residues (reacted material rich in mineral matter and char). Mineral matter has been reported to catalyze the thermo-chemical reactions involved but few works focus on this aspect. In this work, sewage sludge residues were added to fresh sewage sludge. Non-isothermal thermo-gravimetric analysis (TGA) coupled with infrared spectrometry (FTIR) showed that added residues reduce the characteristic reaction temperatures during char combustion and gasification (air, air-N₂, and CO₂ atmospheres). However, any considerable influence of residues was observed during pyrolysis experiments (N₂ atmosphere). The analysis of gas produced during those experiments revealed further details about the solid decomposition, showing considerable differences between different atmospheres.     

Biogenic sulfuric acid attack on different types of commercially produced concrete sewer pipes

Laboratory experiments were conducted to compare the degradation of low and high quality concrete under conditions simulating sewer pipes with and without bacteria. Small concrete samples were exposed to hydrogen sulfide, multiple species of bacteria found in corroding sewer pipes and artificial wastewater. Experiments without bacteria were used as controls. The corrosion rates of the concrete samples exposed to bacteria over 227 days were 0.08 mm/yr (millimeters per year) for the concrete from a domestic manufacturer with moderate strength and a lower water-cement ratio (Low-w/c) versus 0.208 mm/yr for the concrete samples from a foreign country with low strength and a higher water-cement ratio (High-w/c). The (Low-w/c) concrete was more resistant to the biodegradation even though a lower pH was attained for its bioactive systems. Experiments showed the influence of biogenic sulfuric acid production on short term corrosion rates.