Partial purification and characterisation of potato pectinesterase

Pectinesterase (EC 3.1.1.11) was extracted from potato (Solanum tuberosum var. Russet Burbank) tissue and purified 9.6-fold by ammonium sulphate precipitation and chromatography on Sephadex G-100. The enzyme preparation thus obtained has a molecular weight of 25,000, an apparent K_m of 0.09% for citrus pectin and a pH optimum of 7.5. NaCl is a positive modulator of the enzyme. The energy of activation of the enzyme is 6200 calories. A Q₁₀ of 1.33 is observed in the temperature range of 25 to 45°C, and the optimum temperature for the enzyme is 55°C.     

Correlations for trans-isomer formation during partial hydrogenation of oils and fats

Two empirical models are proposed to correlate the amount of trans-isomers formed during the partial hydrogenation of oils and fats as a function of the degree of hydrogenation and process variables. From minimal experimental data, constants for these models can be obtained and used to interpolate or extrapolate the trans-isomer data to predict the amount of trans-isomers formed during a partial hydrogenation or to select processing conditions for a desired amount of trans-unsaturation. The application of these models has been demonstrated using hydro-genation data for soybean and rapeseed oils.     

Modeling of pullulan fermentation by using a color variant strain of Aureobasidium pullulans

Pullulan, which is comprised of glucose units, is a simple linear polysaccharide produced by Aureobasidium pullulans. Pullulan has long been used in various applications such as blood plasma substitutes, food additives, adhesive additives, flocculants, and even environmental pollution control agents. Mathematical models of biomass, pullulan, and sucrose profiles during fermentation not only provide information about the kinetic-metabolic nature of pullulan, but also facilitate the control and optimization of pullulan production. In this study, several models were modified and tested in order to describe biomass, pullulan, and sucrose profiles during batch fermentation using a color variant strain of A. pullulans. The results demonstrated that the modified Gompertz model can serve as a universal equation to fit biomass production, pullulan production, and sucrose consumption. Furthermore, validation of this modified Gompertz model indicated that biomass (slope = 1.00, R² = 0.991), pullulan (slope = 1.10, R² = 0.991), and sucrose (slope = 0.96, R² = 0.991) were all predicted accurately.     

Effects of initial ammonium ion concentration on pullulan production by Aureobasidium pullulans and its modeling

Pullulan fermentations by Aureobasidium pullulans with various initial ammonium ion concentrations were evaluated in a 2-L bioreactor. The results demonstrated that A. pullulans produced highest pullulan (23.1 g/L) when the initial ammonium sulfate was 7 at 5 g/L. The purity of produced pullulan was 94.6%. Seven gram per liter of ammonium sulfate produced more biomass due to the higher level of nitrogen source, but the pullulan-degrading enzyme activity was detected after the depletion of sucrose, which reduced pullulan concentration. From the results of fed-batch fermentation, addition of 10 g/L of sucrose suppressed A. pullulans from producing pullulan-degrading enzyme. Additionally, the modified-Gompertz equation demonstrated its generality to fit all pullulan production, biomass production, and sucrose consumption curves at three ammonium sulfate levels. After incorporating the degrading factor, a re-modified-Gompertz equation was obtained that can adequately describe the decrease of pullulan at the late fermentation stage.     

Computational analysis of fouling by low energy surfaces

Fouling is a cost increasing problem for a variety of industries including aerospace, chemical, petroleum, and food. There have been studies on mitigation of fouling some of which recommend use of lower surface free energy materials, manufactured by different techniques, as an alternative to conventional materials. Although modeling of fouling for a given surface has been an area of interest; there is a lack in the models about correlating the surface free energy with deposit amount computationally. In this study, computational model, including the effect of surface energy and operational parameters, was proposed and validated to estimate amount of foulants deposits and rate of deposition. Towards this purpose, four coated surfaces (Microlube/PTFE, TM117P, AMC148, and CNT) were compared with stainless steel (SS316 as control) for flow rates of 3 and 10 g/s and inlet milk temperatures of 40 and 60 °C. The percent error for the decrease in outlet milk temperatures between the experimental data and computed results was between 2% and 18% except for CNT (29.2%). The calculations of deposit amount for each test case and the surfaces tested were in good agreement with the experiments, i.e., average percent difference values between measured and calculated values were from 11.1% to 38.1% (except CNT) with overall average of 21.5%.     

An UWB trapezoidal rings fractal monopole antenna with dual‐notch characteristics

An ultra‐wideband planar fractal monopole antenna with dual‐notch characteristics is presented in this article. The microstrip fed antenna consists of nested trapezoidal rings and defected ground plane. Measured results show that the proposed antenna operates with a 10 dB return loss bandwidth from 2.2 to 10.8 GHz with notch bands at (2500‐2690) MHz and (3300‐4200) MHz covering LTE 2500, WiMAX and part of C‐band.     

Effect of chopping on the properties of bismuth oxide thin films

Nanocrystalline bismuth oxide thin films have been deposited by thermal oxidation, in air, of vacuum evaporated chopped bismuth thin films. The optical properties and adhesion have been studied. The oxidation temperature and duration were varied. As revealed by structural investigations, polycrystalline and multiphase bismuth oxide thin films were obtained. At all oxidation temperatures, monoclinic Bi₂O₃ is predominant. The films showed high transmittance in the visible range of spectrum. The direct band gap of the films obtained was between 2.78 eV and 3.04 eV. The refractive index observed is in the range 1.934 to 2.096. The adhesion of films was in the range 215 × 10² to 470 × 10² kgF/cm². The values are strongly influenced by the heat treatment characteristics. It was observed that chopping helps in improving the adhesion and increasing refractive index, packing density and band gap of bismuth oxide thin films. These bismuth oxide films can have potential use in optical waveguides.