Coordinated control of TCSC and UPFC to aid damping oscillations in the power system

A valid damping of oscillations is an upcoming extensive challenge while maintaining the stability of the power system. This oscillation generally occurs due to the fluctuation raised, when two systems are interconnected. This paper addresses the oscillation occurred in the power system as the main challenge, which thus performs an effective simulation in 68-bus system. Here, it promotes a sufficient CC with two FACTS devices such as TCSC and UPFC, which are connected with PSS. Further, it adopts firefly algorithm to enable the CC among the FACTS devices. To the next of the simulation, this paper compares the performance of the FF- CC with conventional optimisations include GSO, PSO, GA and ABC algorithms to enable CC. Further, it provides a detailed analysis of the impact of PSS and loading effects on CC. As a result, the performance of FF-CC hands over the stable power system with powerful damping of oscillations, after comparing it with the existing methods.

Abbreviations: ABC, Artificial Bee Colony; ICA, Imperialist Competitive Algorithm; AVR, Automatic Voltage Regulators; NETS, New England test system; BFOA, Bacteria Foraging Optimization Algorithm; NYPS, New York power system; BSO, Bacterial Swarm Optimization; PSO, Particle Swarm Optimization; CC, Coordinated Control; PSS, Power System Stabilizers; COA, Chaotic Optimization Algorithm; STATCOM, Static Synchronous Compensator; CS, Cuckoo Search; SSSC, Static Synchronous Series Compensator; FACTS, Flexible Alternating Current Transmission System; SVC, Static Var Compensator; GA, Genetic Algorithm; TCSC, Thyristor Controlled Series Capacitor; GSO, Gravitational Search Algorithm; UPFC, Unified Power Flow Controller     

Process Evaluation of AISI 4340 Steel Manufactured by Laser Powder Bed Fusion

Laser powder bed fusion (L-PBF) involves the consolidation of metal powder, layer by layer, through laser melting and solidification. In this study, process parameters are optimized for AISI 4340 steel to produce dense and homogeneous structures. The optimized process parameters produce mechanical properties at the center of the build plate that are comparable to wrought in the vertical and horizontal orientations after heat treatment and machining. Four subsequent builds are filled with specimens to evaluate the mechanical behavior as a function of location and orientation. Variations in the mechanical properties are likely due to recoater blade interactions with the powder and uneven gas flow. The results obtained in this study are analyzed to assess the reliability and reproducibility of the process. A different build evaluates the performance of near-net-shaped tensile specimens angled 35°-90° from the build plate surface (horizontal). Ductility measurements and surface roughness vary significantly as a function of the build angle. In the stress-relieved and as-built conditions, the mechanical behavior of vertically oriented specimens exhibits somewhat lower and more variable ductility than horizontally oriented specimens. Therefore, several process variables affect the mechanical properties of parts produced by the L-PBF process.     

Seismic individual plant examination of external events of US nuclear power plants: insights and implications

As part of the implementation of the severe accident policy, nuclear power plants in the US are conducting the individual plant examination of external events (IPEEE). Seismic events are treated in these IPEEEs by either a seismic probabilistic risk assessment (PRA) or a seismic margin assessment. The major elements of a seismic PRA are the seismic hazard analysis, seismic fragility evaluation of structures and equipment and systems analysis using event tree and fault tree analysis techniques to develop accident sequences and calculate their frequencies of occurrence. The seismic margin assessment is a deterministic evaluation of the seismic margin of the plant beyond the design basis earthquake. A review level earthquake is selected and some of the components that are on the success paths are screened out as exceeding the review level earthquake; the remaining ones are evaluated for their seismic capacity using information from the original plant design criteria, test data and plant walkdown. The IPEEEs of over 100 operating nuclear power plants are nearing completion. This paper summarizes the lessons learned in conducting the IPEEEs and their applicability to nuclear power plants outside of the United States.     

Rapid thermal magnetic annealing as an emerging technology in field-annealing of thin magnetic films for recording heads

An emerging field where rapid thermal processing (RTP) is now rapidly finding its first acceptance is in the industrial manufacturing of thin-film head devices for magnetic recording. Here soft-magnetic thin-film flux guide structures (usually composed of high-moment alloys containing iron, etc.) are applied onto ceramic substrate wafers (such as Al₂O₃–TiC) of sizes up to 150 mm and subsequently ‘activated' by heating and cooling in a magnetic field.We assessed the advantages of rapid thermal magnetic annealing (RTMA) in a new prototype reactor with an external electromagnet, capable of generating an extremely homogeneous magnetic field of 660 Oe (52.8 kA/m) with field lines parallel across the entire wafer area (150 mm in diameter). Samples with 1 μm thick amorphous iron-alloy layers (Fe₇₇Nb₁₁N₁₀Si₂) sputter-deposited onto ceramic substrates of single-crystalline GGG-garnet (Gd₃Ga₅O₁₂) were conventionally annealed and RTMA-annealed in N₂/H₂ at temperatures between 550 and 700°C. Structural analysis by transmission electron microscopy (TEM) and electron diffraction showed that the enhanced performance of the RTMA-annealed layers is due to the different nanocrystallization kinetics induced by the fast heating and cooling rates of RTMA.The ceramic substrate materials normally used in head manufacturing (such as Al₂O₃–TiC) have favorable grey-body properties with high emissivity (≥0.7) over a wide range of temperatures (25–700°C) and wavelengths (1.5–10 μm), which excludes the difficulties encountered in pyrometric temperature control of infrared-transparent substrates such as silicon. We conclude that RTMA yields superior soft-magnetic materials, where throughput numbers of ≥30 wafers/h are possible.     

Machining of a hybrid–metal matrix composite using an erosion–abrasion-based compound wheel in electrical discharge grinding

Machining of the composites made of matrix and reinforcement is always difficult for manufacturing industries due to their unusual properties. Among various existing traditional and non-traditional machining processes, erosion-based machining process i.e., Electrical Discharge Grinding (EDG) and the abrasion-based process i.e., Diamond Grinding (DG) have been shown their potential to machine such difficult-to-machine materials. The aims of the present study are to analyze the performances of the erosion–abrasion-based compound wheel during machining of the hybrid–metal matrix composite made of Aluminum–Silicon Carbide–Boron Carbide (Al/SiC/B₄C) by the stir casting method. The performances of the compound wheel have been tested on the EDM machine in the face grinding mode. The role of pulse current, pulse on-time, pulse off-time, wheel RPM, and abrasive grit number have been analyzed on the material removal rate (MRR) and average surface roughness (Ra). The experimental results showed that the machining with compound wheel gives higher MRR with better surface finish as compared to the uniform wheel. It has also been observed that MRR and Ra are highly affected by the pulse current, pulse on-time, and wheel RPM.     

Sandwiched liquid metal membrane (SLiMM) for hydrogen purification

Palladium‐based membranes are currently the most advanced membranes for hydrogen separation and are on the verge of practical application. However, the search for alternative membranes continues in an effort to lower their cost and susceptibility to poisons. Here for the first time we report a novel sandwiched liquid metal membrane (SLiMM) for hydrogen separation. Permeation experiments indicate that the Ga/SiC SLiMM has a permeability of at 500°C, which is 35 time higher than that for Pd under similar conditions. This promises a potential for application of SliMM in hydrogen purification. © 2016 American Institute of Chemical Engineers AIChE J, 63: 1483–1488, 2017     

Experimental Modeling and Simulation of Supercritical Fluid Extraction of Moringa oleifera Seed Oil by Carbon Dioxide

Moringa oleifera seed is an important source of high oleic acid in vegetable oil. In the present work, supercritical extraction of Moringa seed oil has been carried out to study the influence of operating temperature, pressure, particle size, carbon dioxide flow rate, and co-solvent addition by performing experiments in the range of 333–373?K, 20–40?MPa, 0.50–1.00?mm, 0.83?×?10^?4–2.50?×?10^?4?kg/s, and 0–10% ethanol. The extraction data have been successfully modeled by extended Lack’s model and fitting parameters are optimized by the Box global optimization technique. The results showed that pressure has a significant effect followed by temperature, co-solvent, solvent flow rate, and particle size.     

Aluminum nitride‐single walled carbon nanotube nanocomposite with superior electrical and thermal conductivities

Development of aluminum nitride (AlN)‐single walled carbon nanotube (SWCNT) ceramic‐matrix composite containing 1‐6 vol% SWCNT by hot pressing has been reported in this article. The composites containing 6 vol% SWCNT are dense (~99% relative density) and show high dc electrical conductivity (200 Sm^?1) and thermal conductivity (62 Wm^?1K^?1) at room temperature. SWCNTs contain mostly metallic variety tubes obtained by controlled processing of the pristine tubes before incorporation into the ceramic matrix. Raman spectroscopy and field emission scanning electron microscopy (FESEM) of the fracture surface of the samples show the excellent survivability of the SWCNTs even after high‐temperature hot pressing. The results indicate the possibility of preparation of AlN nanocomposite for use in plasma devices and electromagnetic shielding.     

Comprehensive Understanding of Urban Water Supply Management: Towards Sustainable Water-socio-economic-health-environment Nexus

Water Resources Management - The majority of the cities across the developing countries have saddled water supply and quality management issues. Unfortunately, even cities with adequate water...