Nitrophenoxy groups containing polybenzimidazoles as polymer electrolytes for fuel cells: Synthesis and characterization

Polybenzimidazoles containing different contents of pendant nitrophenoxy groups were prepared by condensation of 3,3′‐diamino‐benzidine with a mixture of 3,5‐dicarboxyl‐4′‐nitro diphenyl ether and isophthalic acid (IPA) in different ratios in polyphosphoric acid. The polymers are soluble in polar aprotic solvents, they have inherent viscosities in the range of 0.75–1.10 dL g^?1 and they form tough and transparent films on solution casting. They have good thermal stability with initial decomposition temperature ranging from 380 to 416°C in nitrogen, good tensile strength ranging from 56 to 65 MPa and reasonably good oxidative stability. Phosphoric acid uptake of these polymers is low compared with PBI and membranes doped with phosphoric acid exhibit good proton conductivity in the range of 6.6× 10^?3 to 1.9× 10^?2 S/cm at 25°C and 1.2× 10^?2 to 4.9× 10^?2 S/cm at 175°C, compared with 3.9× 10^?3 S/cm at 25°C and 3.2× 10^?2 S/cm at 175°C for PBI. These membranes are suitable for applications as polymer electrolyte for fuel cell and presumably for gas separation at high temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Comparison of alginate and pectin based beads for production of poultry probiotic cells

A comparative study on the stability and potential of alginate and pectin based beads for production of poultry probiotic cells using MRS medium in repeated batch fermentation was conducted. The bead cores, made of three types of materials, i.e., ca-alginate, ca-pectinate and ca-alginate/pectinate, were compared. The effect of single and double layer coatings using chitosan and core material, respectively, on the bead stability and cell production were also studied. The pectin based beads were found to be more stable than that of the alginate beads and their stability was further improved by coating with chitosan. The cell concentration in pectin based beads was comparable to that in the alginate beads. On the other hand, pectin based beads gave significantly lower cell concentration in the growth medium for the initial fermentation cycles when compared to the alginate beads. In conclusion, pectin was found to be potential encapsulation material for probiotic cell production owing to its stability and favourable microenvironment for cell growth.     

Velocity slip,chemical reaction,and suction/injection effects on two-dimensional unsteady MHD mass transfer flow over a stretching surface in the presence of thermal radiation and viscous dissipation

The purpose of this study is to analyze the impact of velocity slip, chemical reaction, and suction/injection on two-dimensional mass transfer effects on unsteady MHD flow over a stretching surface in the presence of thermal radiation and viscous dissipation. The governing time-dependent nonlinear partial differential equations are transformed into nonlinear ordinary differential equations by using similarity transformations. The converted equations are solved using the numerical technique with the help of Keller-Box method. The effect of nondimensional variables is studied and graphically illustrated on velocity, temperature, concentration, friction factor, Nusselt number, and Sherwood number. Concentration and temperature profiles are enhanced and the contrasting pattern for velocity profiles as increasing the velocity slip and magnetic parameter. The concentration profile is diminished as the Schmidt number (Sc) and chemical reaction (C_r) increase. The concentration, velocity, and temperature profiles display a reversal pattern, as the suction and unsteady parameter (A) increase. The findings of this study are very well-acknowledged with current research.     

Incineration of diesel particulate matter using induction heating technique

Incineration of diesel particulate matter for the regeneration of a mesh-type particulate-filter is achieved using induction heating technique. Heating of the diesel particulates deposited on the mesh-type particulate-filter at around 600 °C is investigated. In the case of the particulate filter, stainless-steel mesh-type filters are considered and the influence on filtering efficiency, the engine performance due to back-pressure generation is studied. Theoretical estimation shows that induction heating approach for the regeneration via exhaust gas heating requires high power (>3 kW). On the other hand, regeneration of mesh-type particulate-filter using induction heating technique requires a low input power of around 0.5 kW in the off-line condition. The proposed mesh-type particulate-filter allowed a filtration efficiency of around 30–40% at lower engine speeds and part loads. Particulate combustion through induction heating at static condition is studied and power required for mesh-type filter and sintered metal filter regeneration during engine operation is estimated theoretically.     

The steady-state kinetics of parallel reaction networks

The conventional kinetic analysis of an overall reaction (OR) is limited to a single sequential pathway of molecular steps at a time, based either on the general quasi-steady state (QSS) approach of Bodenstein, or on the much simpler but limited Langmuir–Hinshelwood–Hougen–Watson (LHHW) approach based on assuming a single rate-determining step (RDS), the remaining being quasi-equilibrated (QE). We recently described a new algebraic methodology for deriving the QSS rate expression for a reaction sequence, which allowed interpretation of the final result in an Ohm's law form, i.e., OR rate=OR motive force/OR resistance of an equivalent electric circuit, where the consecutive mechanistic steps represent resistors in series. Here, we propose a similar Ohm's law form of QSS rate for a reaction system involving parallel pathways, whose equivalent electrical circuit derives directly from the reaction route (RR) Graph of its mechanism, as proposed earlier by us. The results are exact for a reaction network with mechanistic steps linear in intermediates concentrations, while they are approximate, albeit accurate, for non-linear step kinetics. We further show how the LHHW methodology, combined with the concept of intermediate reaction might be utilized to obtain the step resistances involved. For illustration, we utilize the relatively simple examples of: (1) the gas-phase hydrogen–bromine non-catalytic reaction (non-linear kinetics), and (2) zeolite catalyzed N₂O decomposition reaction (linear kinetics). However, the approach is useful for more complex non-catalytic, catalytic and enzymatic reactions networks as well.     

Life cycle assessment of biodiesel production using alkali, soluble and immobilized enzyme catalyst processes

This study deals with the Life Cycle Assessment (LCA) of three different catalytic processes for biodiesel production. In the LCA study, a “cradle to gate” approach was adopted to estimate the environmental impact of different catalytic processes such as immobilized, soluble biocatalyst and alkali catalyst. The results revealed that, biodiesel production using immobilized biocatalyst has less environmental impact compared to alkali and soluble biocatalyst. The environmental impact of the immobilized biocatalyst depends on the reusability factor.     

The Shared Benefits of Data Administration

More than just a regulatory body, the data administration group is responsible for planning and promoting the use of information resources. By managing the corporate data base effectively, data administration provides benefits to everyone who depends on the use of accurate information.     

Kinetics of emitted mass—A study with three dry powder inhaler devices

The purpose of this study was to understand the kinetics of emptying of micronised salbutamol sulphate (SS) and lactohale 300 (LH300) under varying air flow rates (30–180 L min⁻¹) from three dry powder inhaler devices, Rotahaler^® (RH), Monodose Inhaler^® (MI) and Handihaler^® (HH). Aerosol concentration vs. time profiles, determined through real-time laser diffraction particle sizing, demonstrated that the majority of the powder from RH was emitted within one second while a more prolonged aerosolisation was observed from MI and HH. Peak aerosol concentrations were achieved more rapidly from RH compared to MI for both SS and LH300. Calculated cumulative emitted mass (CCEM) vs. time profiles were obtained from the aerosol concentration vs. time profiles and the emitted mass and the rate of CCEM (k_CCEM), estimated from a modelling approach, increased with increasing air flow rates. The k_CCEMvs. air flow rate profiles of SS and LH300 were significantly different at high air flow rates. The k_CCEM was highest from RH and lowest from MI. Differences in k_CCEM between the devices were related to capsule aperture size while the differences between the materials were due to the powder bed structure. This approach provided an understanding of the rate at which powder mass emptied from dry powder inhaler devices and was proposed to be a powerful development tool for the future powder inhalers.     

Indole‐based polymer and its silver nanocomposite as advanced antibacterial agents: synthetic path,kinetics of polymerization and applications

Atom transfer radical polymerization of 1‐allylindole‐3‐carbaldehyde (AIC) was studied by employing 2‐bromoisobutyryl bromide as initiator in toluene. It led to controlled radical polymerization of AIC, with an increase of molecular weight along with the conversion of the monomer, and a relatively narrow molar mass distribution was obtained, as determined by gel permeation chromatography. The living nature of poly(1‐allylindole‐3‐carbaldehyde) (PAIC) was confirmed by the chain extension polymerization whereas ¹H NMR analysis showed that the major population of PAIC retained the chain‐end functional group. PAIC and its silver nanocomposite were found to be biologically active against some tested bacterial pathogens. Minimum inhibitory concentration tests revealed that PAIC exhibited antibacterial activity against Staphylococcus aureus, Proteus mirabilis and Klebsiella pneumonae whereas PAIC/Ag nanocomposite showed antibacterial activity against Enterococcus faecalis and K. pneumonae. © 2012 Society of Chemical Industry     

N,N‐dichloro poly(styrene‐co‐divinyl benzene) sulfonamide polymeric beads: An efficient and recyclable decontaminating reagent for O,S‐diethyl methyl phosphonothiolate,a simulant of VX

An efficient and operationally simple method is developed for chemical decontamination of simulant of VX. A new chlorine bearing reagent N,N‐dichloro poly(styrene‐co‐divinyl benzene) sulfonamide was developed to deactivate the simulant of VX in aqueous medium. This decontamination reaction was monitored by gas chromatography (GC), and the products were analyzed by gas chromatography‐mass spectrometry (GC‐MS). This reagent has advantage over earlier reported reagents in terms of effectiveness, stability, nontoxicity, cost, ease of synthesis, recyclablity (collected after filtration, rechlorinated, and used for further reaction), and decontamination of simulant of VX to give single nontoxic product at room temperature. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011