Application of strength reduction method to dynamic anti-sliding stability analysis of high gravity dam with complex dam foundation

Considering that there are some limitations in analyzing the anti-sliding seismic stability of dam-foundation systems with the traditional pseudo-static method and response spectrum method,the dynamic strength reduction method was used to study the deep anti-sliding stability of a high gravity dam with a complex dam foundation in response to strong earthquake-induced ground action.Based on static anti-sliding stability analysis of the dam foundation undertaken by decreasing the shear strength parameters of ...     

Understanding the Friction Mechanisms Between the Human Finger and Flat Contacting Surfaces in Moist Conditions

Human hands sweat in different circumstances and the presence of sweat can alter the friction between the hand and contacting surface. It is, therefore, important to understand how hand moisture varies between people, during different activities and the effect of this on friction. In this study, a survey of fingertip moisture was done. Friction tests were then carried out to investigate the effect of moisture. Moisture was added to the surface of the finger, the finger was soaked in water, and water was added to the counter-surface; the friction of the contact was then measured. It was found that the friction increased, up until a certain level of moisture and then decreased. The increase in friction has previously been explained by viscous shearing, water absorption and capillary adhesion. The results from the experiments enabled the mechanisms to be investigated analytically. This study found that water absorption is the principle mechanism responsible for the increase in friction, followed by capillary adhesion, although it was not conclusively proved that this contributes significantly. Both these mechanisms increase friction by increasing the area of contact and therefore adhesion. Viscous shearing in the liquid bridges has negligible effect. There are, however, many limitations in the modelling that need further exploration.     

镁还原渣余热利用的现状及尚需解决的问题

硅热法炼镁是我国炼镁的主要方法,近年来我国镁生产规模不断扩大,新技术也不断出现.通过这些年科研和生产工作者的不断研究和实践,目前,镁还原废渣已经得到了比较广泛的利用,但是对镁还原渣中蕴含大量余热的利用研究却不多.本文在总结国内对镁还原渣余热利用成功案例的基础上,提出了镁还原渣余热利用中需要解决的难点,为以后合理利用镁渣余热提供了一定的思路.     

Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing

Bulk ultrafine-grained nickel specimens having grain sizes in the range of 0.25-5 μm were consolidated by hot isostatic pressing technique. The resulting microstructures were characterized by transmission electron microscopy and X-ray diffraction analysis. Compression tests were carried out at room temperature and at strain rate of 1.6×10⁻⁴ s⁻¹. It was found that the measured yield strength does not follow the Hall-Petch law as a consequence of the presence of oxide phase. Therefore, the use of micromechanics based model, which takes into account only the Hall-Petch relationship at grain level for predicting the grain sized effects on mechanical behavior of this kind of materials, is not accurate yet. In this study, a modification made to the generalized self-consistent model was proposed for studying both grain size and oxide phase dependence of ultrafine-grained materials behavior. Because of the novel modification, an optimization procedure with two steps was required to identify the parameters of micromechanical model. An acceptable agreement between experimental and numerical results was achieved. Moreover, the influence of texture on the yield strength and the application of the proposed model to the spark plasma sintering processed materials were also discussed.     

Amphiphilic and photocatalytic behaviors of TiO2 nanotube arrays on Ti prepared via electrochemical oxidation

Amphiphilic TiO₂ nanotube arrays (TiO₂ NTs) were fabricated through electrochemical oxidation of Ti in solution containing H₃PO₄ and NaF. Scanning electron microscopic analysis shows that the as-prepared TiO₂ NTs have an average pore diameter of 100 nm and a wall thickness of 15 nm. The electrochemical oxidation of Ti can be divided into four stages. In the first stage, when the potential is very low, oxygen formation and Ti dissolution are the major reactions. The second stage corresponds to a slightly higher potential, but less than 2.5 V. In this stage, the formation of TiO₂ film occurs. When the potential is increased to the even higher range from 2.5 V to 6 V, the TiO₂ film dissolves and nanoporous surface structure is generated. This is the third stage. Further increase of the potential enters stage four. The high potentials cause the self-organization of the nanostructure and allow the formation of well-aligned TiO₂ NTs. We also found that the change in surface condition of Ti by annealing heat treatment affects the film dissolution kinetics. As compared with TiO₂ thin film, the TiO2 NTs show higher photocatalytic activity on decomposing Rhodamine B. The surface of the TiO₂ NTs can be wetted by both water and oil. Such an amphiphilic property comes from the capillary effect of the nanochannel structure of the TiO₂ NTs. Because of the amphiphilic property and the photocatalytic activity, we conclude that the TiO₂ NTs have the capability of self-cleaning.     

Infrared emission properties and energy transfer in ZnO-SiO2:Yb composites

Intense near-infrared emission at 1 μm has been obtained in ZnO-SiO₂:Yb³⁺ composites via a facile sol-gel method upon broadband ultraviolet light excitation. Systematic optical measurements including static and time-resolved photoluminescence have been performed to elucidate the energy transfer from ZnO quantum dots to Yb³⁺ ions. The dependence of energy transfer efficiency on Yb³⁺ concentration has been investigated in detail. Codoping with Li⁺ ions leads to about twice enhancement of the near-infrared luminescence intensity around 1 μm at room temperature. The enhancement in the luminescence intensity could be mostly attributed to the modification of the local symmetry around Yb³⁺ ions by codoping with Li⁺ ions.     

Dynamic behavior of a Zr-based metallic glass at cryogenic temperature

The dynamic behavior of a Zr-based bulk metallic glass at cryogenic temperature is investigated by a miniaturized split Hopkinson pressure bar apparatus. As that at room temperature, the failure stress decreases suddenly and then tends to hold steady along with increasing strain rate at cryogenic temperature, but the strain rate regime corresponding to the sudden decrease of the failure stress moves up. The failure stress also increases along with decreasing temperature, whereas there is no obvious change for the plasticity.     

Increasing the accuracy of level-based volume detection of medical liquids in test tubes by including the optical effect of the meniscus

A novel system for liquid volume detection is reported in this paper. The system uses two lasers with different wavelengths to scan the entire height of tubes. By detecting the shape and position of the meniscus that is formed at the liquid-air interface, the volume of liquid in a tube of known geometry can be determined. To increase the accuracy of this level-based volume detection, the shape of the meniscus must be considered. The optical effect of the meniscus in such a system was modeled and its effect on the volume detection simulated. A laboratory prototype was built and the biggest difference between the measured power of the transmitted light through the meniscus and the simulated data was less than 8%.     

Modelling of light extinction by soot particles

A simplified model for the prediction of light extinction through combustion generated smoke is presented. The model builds upon existing theory and available experimental data to account for the principal factors that influence light extinction in participating media, including wavelength, primary particle size distribution and morphological structure of particle aggregation as well as multiple scattering among particles within a particle aggregation. Good agreement is demonstrated between the model predictions and experimental data in the visible and IR ranges. The model illustrates that as the mean particle size increases, the integral optical property of a soot cloud approaches that of monodisperse particles. It is postulated in the current study that the number of particles participating in multiple scattering is around 20 regardless of the real size of particle aggregation.     

闽南方言流浪记:以词汇输出为证

闽南方言具有很鲜明的扩散性,除了在粤东、海南、浙南等地扩散之外,还漂洋过海流播到海峡对岸的台湾、琉球地区,也在南洋(东南亚)等地和印尼-马来语交融,并与菲律宾的他加禄语接触,此外,还经由同是闽南语系的潮汕人散播到泰国、缅甸等并进入当地的语言.闽南方言的流浪记,讲述的就是其在海外的传播和扩散,通过采集外语里的闽南方言借词为例,可以考证两者语言接触的客观存在、主要进程和空间走向.