Shape-Controlled Synthesis and Upconversion Luminescence of Y2O3:Yb, Er Microstructures

The Y2O3: Yb3 , Er3 microstructures were fabricated by a hydrothermal method without surfactants.The microstructures structure was characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM,KYKY 1000B).The up-conversion luminescence spectra were studied under 978 nm laser diode excitation.In Yb3 and Er3 codoped Y2 O3 microcrystals, the relative intensity of green emission became stronger as the morphology of sample changed from wires to films.     

枣35断块沙三段玄武岩储层特征及成藏条件分析

从地质、地震、测井及试油试采等方面入手，并采用新技术，对自来屯构造枣35断块沙三段玄武岩储层特征及成藏条件进行了分析。其结果为该区下一步勘探、开发及进一步研究奠定了基础。     

SECANT-FUZZY LINEAR REGRESSION METHOD FOR HARMONIC COMPONENTS ESTIMATION IN A POWER SYSTEM

In order to avoid unnecessary damage of electrical equipments and installations,high quality power should be delivered to the end user and strict control on frequency should be made, Therefore, it is important to estimate the power system's harmonic components with higher accuracy. This paper presents a new approach for estimating harmonic component in a power system using secant - fuzzy linear regression method. In this approach the non - sinusoidal voltage or current waveform is written as I linear function. The coefficient of this function is assumed to be fuzzy number with a membership function that has center and spread value. The time dependent quantity is written as Taylor series with two different time dependent quantities. The objective is to use the sample obtained from the transmission line to find the power system harmonic components and frequencies. We used an experimental voltage signal from a sub power station as a numerical test.     

"信号调制法"研究电子诱导脱附--基本原理及误差分析

电子诱导脱附是近年来在真空科学与表面科学领域内的热门研究课题。它不仅作为研究和探讨原子激发过程以及电子能量传输机制的有效手段,而且已经逐渐成为获取表面和界面结构、状态等信息的有效方法。“信号调制法”是利用脉冲电流能量调制的电子探束取代传统的直流电子探束,并通过测量电子诱导脱附产物引起的压强变化量,来研究电子诱导脱附的新方法。本文系统地介绍了该方法的基本原理,并从理论上对该方法带来的测量误差进行了分析。     

双自由度后坐保险机构的计算机动态仿真

在Workin Model 3D软件上对引信的双自由度后坐保险机构进行了有关计算机仿真计算，并结合具体实例进行了优化设计。     

激光二极管线阵光束变换研究

推导出激光二极管线阵光束通过透镜系统的光强分布表达式，分析了出射光束的传输特性，设计一种凹柱透镜的光束变换系统得到一维均匀光强分布。此外，给出扩展角宽度的计算公式。     

数字频率合成技术在地球站中的应用

数字分频式微波频率合成器,具有结构简单,造价低,良好的低相嗓特性等优点,因而被通信卫星地球站所广泛采用。论述了数字分频式频率合成技术在工星通信地球站中的应用,提出了采用高度集成锁相环器件:PE3336设计一种低相噪特性的微波数字频率源的工程实例,并将之用于某通信卫星转发器地球站设备中。     

超声处理对RTM成型复合材料界面性能的影响

在RTM成型过程中采用超声技术。探讨了超声处理的最佳工艺参数,着重研究超声处理对RTM成型复合材料界面性能的影响。结果表明,在RTM成型过程中采用超声技术增加了树脂对纤维增强体的浸润性,使树脂中的空气和成型过程中产生的气泡易于排出,从而减少了复合材料的孔隙率,进而改善复合材料的界面性能。     

光通信用垂直腔面发射激光器的进展

垂直腔面发射激光器(VCSEL)以其优异的性能有望成为信息时代的新光源.文章介绍了用于光通信的VCSEL的开发现状.