三层PE防腐新技术在埋地管道中的应用

简要介绍先进的埋地管道防腐工艺——管道三层PE防腐,在埋地天然气管道、给排水管道中的应用,三层PE管道防腐工艺逐渐取代传统的管道防腐工艺。     

Properties and crystallization kinetics of poly(ether ether ketone)‐co‐poly(ether ether ketone ketone) block copolymers

A series of block copolymers composed of poly(ether ether ketone) (PEEK) and poly(ether ether ketone ketone) (PEEKK) components were prepared from their corresponding oligomers via a nucleophlilic aromatic substitution reaction. Various properties of the copolymers were investigated with differential scanning calorimetry (DSC) and a tensile testing machine. The results show that the copolymers exhibited no phase separation and that the relationship between the glass‐transition temperature (T_g) and the compositions of the copolymers approximately followed the formula T_g = T_g1X₁ + T_g2X₂, where T_g1 and T_g2 are the glass‐transition‐temperature values of PEEK and PEEKK, respectively, and X₁ and X₂ are the corresponding molar fractions of the PEEK and PEEKK segments in the copolymers, respectively. These copolymers showed good tensile properties. The crystallization kinetics of the copolymers were studied. The Avrami equation was used to describe the isothermal crystallization process. The nonisothermal crystallization was described by modified Avrami analysis by Jeziorny and by a combination of the Avrami and Ozawa equations. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1652–1658, 2005     

光纤光栅传感器中磁场测量稳定性研究

为了减小光纤光栅磁场传感器中线性双折射和入射起偏角对系统稳定性的影响,提高测量系统的准确性,提出一种减小线性双折射和起偏角大小对系统输出影响的设计方案。研究了基于法拉第效应的光纤光栅磁场传感器系统,得出系统输出电压与磁场的关系式,并通过降低线性双折射和确定入射起偏角改善了系统的输出特性。仿真表明:该方法可以有效抑制测量过程中线性双折射造成的非线性关系,从而提高磁场测量的稳定性。     

镀液流速对碳化硅微粒与铜共沉积的影响

本文利用易于控制流速的旋转圆盘电极研究了SiC微粒与Cu的共沉积。得出了在不同镀液流动速度下镀得的复合镀层中微粒含量与镀液中微粒浓度以及与电流密度之间的关系曲线,进而探讨了镀液流速对Cu-SiC共沉积的影响。镀液流速通过影响微粒与阴极之间的弱吸附影响微粒在阴极表面的停留,从而对Cu-SiC复合电沉积过程产生很大影响。     

醋酸乙烯-丙烯酸无皂乳液共聚的研究

以醋酸乙烯(VAc)为主单体,丙烯酸(AA)为改性功能单体,以半连续加料方式进行无皂乳液共聚过程,得到了稳定且固含量为30%左右的乳液。探讨了功能单体AA含量、反应温度等对共聚的影响。采用FT-IR、粒径分析等方法对共聚物的组成、乳胶粒子的尺寸及分布进行了分析表征。结果表明:在(65±2)℃下聚合,所得乳液稳定性好、转化率高、反应完全,且随着功能单体AA含量的增加,乳液黏度上升、单体转化率下降、乳胶粒粒径变小且粒径呈单分散性。     

Synthesis, characterization, and crystal structures of two new polyoxomolybdate wheel clusters

Two new polyoxomolybdates Na₅(NH₄)₁₆[Mo₅₇Mn₆(NO)₆O₁₇₄ (OH)₃(H₂O)₂₄] · 44H₂O (1) and (NH₄)₂₁[Mo₅₇Cu₆(NO)₆O₁₆₈(OH)₃(H₂O)₂₄] · 53H₂O (2) were synthesized in aqueous solution and characterized by elemental analysis, IR, TG analysis and single-crystal X-ray diffraction. They represent interesting examples of integrating and embedding magnetic 3d metal ions into the diamagnetic polyoxomolybdate host structure.     

The morphology and mechanical properties of dynamic packing injection molded PP/PS blends

As a part of long-term project aimed at super polyolefin blends, in this work, we report the mechanical reinforcement and phase morphology of the immiscible blends of polypropylene (PP) and polystyrene (PS) achieved by dynamic packing injection molding (DPIM). The shear stress (achieved by DPIM) and interfacial interaction (obtained by using styrene-butadiene-styrene (SBS) as a compatibilizer) have a great effect on phase morphology thus mechanical properties. The shear-induced morphology with core in the center and oriented zone surrounding the core was observed in the cross-section areas of the samples. The phase inversion was also found to shift towards lower PS content under shear stress, at 70 wt% in the core and 30 wt% in the oriented zone, compared with 80 wt% for static samples (without shear). The tensile strength, tensile modules and impact strength were found largely increase by means of either shear stress or compatibilizer. The PS particle size is greatly reduced with adding of SBS, and the reduced particle size results in greater resistance to deformation, which causes the co-continuous structure at oriented zone change into droplet morphology. The morphology resulting from blending and processing was discussed based on effect of interfacial tension, shear rate, phase viscosity ratio and composition. The observed change of mechanical properties was explained based on the combined effect of phase morphology (droplet-matrix or co-continuous phase) and molecular orientation under shear stress.     

Interaction of methane with surfaces of silica,aluminas and HZSM-5 zeolite. A comparative FT-IR study

Infrared investigations on the interaction of methane with silica, aluminas (, and ) and HZSM-5 zeolite have been carried out. At low temperature (173 K), methane adsorption was observed over these oxides and HZSM-5 zeolite. Our findings featured that the infrared inactive ₁ band (2917 cm^–1) of a gaseous methane molecule became active and shifted to lower frequencies (2900 and 2890 cm^–1) when it adsorbed on the surfaces of these adsorbents. Our results also demonstrate that hydroxyl groups played a very important role in methane adsorption over the acidic oxides and the HZSM-5 zeolite. When interaction between the hydroxyl groups and methane took place, the band shift of the hydroxyl groups varied with different oxides. The strength of the interaction decreased according to the following sequence, Si-OH-Al>Al-OH>Si-OH, which is in accordance with the order of their acidities. At higher temperatures, methane interacted quite differently with various oxides and HZSM-5 zeolite. It has been observed that the hydroxyl groups of silica, -alumina and HZSM-5 zeolite could exchange with CD₄ at temperatures higher than 773K, while those on -alumina could exchange at a temperature as low as 573 K. Another interesting observation was the formation of formate species over Al₂O₃ (both and ) at temperatures higher than 473 K. The formate species would decompose to CO₂, or produce carbonate at much higher temperatures. Formation of formate species was not observed over silica and HZSM-5 under similar conditions, -Al₂O₃ did not adsorb or react with methane in any case.     

混合纤维制品在制瓶玻璃窑供料道上的应用

叙述了用多晶氧化铝纤维和高铝纤维制成的混合纤维段制品的生产工艺。该制品是一种能在１３５０℃长期使用的隔热新材料，它用在全电加热玻璃窑供料道后，玻璃液温度稳定，料滴温度长期控制精度可达±１℃，成品率上升到９６．６％，能耗降低。     

羟基烷基磺酸镀液电镀Sn—Pb合金的研究

我国自行研制生产的羟基烷基磺酸电镀Sn-Pb合金镀液已经在部分厂家投产使用.生产实践证明,该镀液能获得不同铅含量的、可焊性优良且镀层结晶细致而光亮的Sn-Pb合金镀层.本研究重点测定了该镀液的电化学性能,如阴极电流效率、分散能力及深镀能力.并对添加剂的作用进行了研究探讨.