广东省伴生放射性矿资源利用过程辐射水平调查

为加强伴生放射性矿物资源开发利过程中放射性环境管理 ,防治放射性污染 ,对广东省几个大型伴生矿(包括稀土矿、钽铌矿和铅锌矿 )资源利用 (开采、冶炼、加工 )过程中天然放射性核素的污染现状进行了调查。调查结果表明 :稀土矿中独居石 ,天然放射性核素含量最高 ,2 3 8U、2 3 2 Th、2 2 6Ra的含量分别为 3.5 1× 1 0 4、1 .74× 1 0 5、4 .8×1 0 4Bq/kg,其冶炼废渣中核素的含量分别为 5 .1 0× 1 0 5、6 .38× 1 0 6、1 .5 2× 1 0 6Bq/kg。稀土选冶厂周围陆地环境 γ射线的空气吸收剂量率比一般地区的高。     

双相活齿泵的工作原理

在活齿传动理论及齿轮泵工作原理相结合的基础上，介绍了双相活齿泵的结构及其工作原理，研究结果表明，双相活齿泵具有流量大、流量均匀性好、噪声低以及可变量等优点。     

甲醇氧化羰化制碳酸二甲酯产物气相色谱分析

以Chromosorb 10 1为固定相 ,气相色谱法分析甲醇氧化羰化制碳酸二甲酯产物中水、甲醇、乙酸甲酯和碳酸二甲酯等组份的含量 ,考察了柱温 ,载气流量对分离度的影响 ,确定了适宜的分析条件 ,并用校正面积归一化法定量。该方法操作简便 ,快速 ,精度高 ,重现性好     

TPS分散型控制系统在骤冷风空调装置中的应用

主要介绍了Honeywell公司TPS系统在直纺涤纶长丝用骤冷风空调装置中的应用。重点说明了该系统的硬件配置和一些复杂控制回路的实施和组态。     

三维连通网络陶瓷的电磁特性Ⅱ电磁参数的影响因素

通过对具有不同骨架L径、陶瓷浆料组分在不同温度下烧结的三维连通网络陶瓷的电导率和电磁参数的测量,研究了对这种网络结构材料电磁参量的影响因素.结果表明,当三维连通网络陶瓷的电导率为10-4＜σ＜101S/cm时,其电损耗及感应磁损耗较大.三维连通网络陶瓷在高温下有较大的介电损耗特性,使其成为耐高温电吸波材料的理想选择.     

A concise process technology for 3-D suspended radio frequency micro-inductors on silicon substrate

In this letter, a concise process technology is proposed for the first time to enable the fabrication of good quality three-dimensional (3-D) suspended radio frequency (RF) micro-inductors on bulk silicon, without utilizing the lithography process on sidewall and trench-bottom patterning. Samples were fabricated to demonstrate the applicability of the proposed process technology.     

一种用于SOC设计中的智能I/O处理器的实现

文章介绍了SOC设计流程，智能I／O处理器组成，在开发该处理器对VHDL源代码的优化问题。     

莱钢中小型连轧生产线技术装备状况及改进

介绍了莱钢引进的具有 90年代国际先进水平的中小型型钢连轧生产线的工艺、设备特点及主要技术参数 ,以及对原机械设备、电气及工艺备件的改进和新产品开发情况 ,均取得良好效果。     

Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy

Diamond grits were brazed onto a steel substrate using a prealloyed Cu-10Sn-15Ti (wt pct) brazing alloy at 925 °C and 1050 °C. Due to the relatively high concentration of Ti in the brazing alloy, the braze matrix exhibited a composite structure, composed of β-(Cu,Sn), a Cu-based solid solution, and various intermetallic compounds with different morphologies. The reaction of Ti with diamond yielded a continuous TiC layer on the surfaces of the diamond grits. On top of the TiC growth front, an intermetallic compound, composed of Sn and Ti, nucleated and grew into a randomly interwoven fine lacey structure. An interfacial structure developed as the interwoven fine lacey phase was semicoherently bonded to the TiC layer, with the Cu-based braze matrix filling its interstices. The thickness of such a composite layer was increased linearly with the square root of isothermal holding time at 925 °C, complying with the law of a diffusion-controlled process. However, at 1050 °C, the segregation behavior of Ti and Sn to the interfaces between the TiC layer and the braze matrix diminished, due to the increased solubility of Ti in the Cu-based liquid phase. The enhanced dissolution of Ti in the Cu-based liquid phase at 1050 °C also caused the precipitation of rod-like CuTi with an average diameter of about 0.2 μm during cooling. SnTi₃ was the predominant intermetallic compound and existed in three different forms in the braze matrix. It existed as interconnected grains of large size which either floated to the surface of the braze matrix or grew into faceted grains. It also exhibited a nail-like structure with a mean diameter of about 1 μm for the rod section and a lamellar structure arising from a eutectic reaction during cooling.     

A random switching method for HPWM full-bridge inverter

To overcome the problem of unequal switching loss in power switches, in conventional hybrid pulse width modulation (HPWM) full-bridge inverters, a random switching method for HPWM full-bridge inverters is proposed. The proposed method equalizes switching losses of the four switches, while also providing good output performance