MULTICARRIER DS—CDMA WITH ADAPTIVE MODULATION AND POWER ALLOCATION

Adaptive modulation and power allocation is introduced into the multicarrier DSCDMA system to improve the system performance and bandwidth efficiency.First,the system design appropriate for adaptive modulation and power allocation is given,then the algorithm of adaptive modulation and power allocation is applied.Simulation results demonstrate great performance improvement compared with the fixed modulated one.     

Exchange-correlation errors at harmonic and anharmonic orders: the case of bulk Cu

As an aid towards improving the treatment of exchange and correlation effects in electronic structure calculations, it is desirable to have a clear picture of the errors introduced by currently popular approximate exchange-correlation functionals. We have performed ab initio density functional theory and density functional perturbation theory calculations to investigate the thermal properties of bulk Cu, using both the local density approximation (LDA) and the generalized gradient approximation (GGA). Thermal effects are treated within the quasiharmonic approximation. We find that the LDA and GGA errors for anharmonic quantities are an order of magnitude smaller than for harmonic quantities; we argue that this might be a general feature. We also obtain much closer agreement with experiment than earlier, more approximate calculations.     

Electronic properties of magnetically doped nanotubes

Effect of doping of carbon nanotubes by magnetic transition metal atoms has been considered in this paper. In the case of semiconducting tubes, it was found that the system has zero magnetization, whereas in metallic tubes the valence electrons of the tube screen the magnetization of the dopants: the coupling to the tube is usually antiferromagnetic (except for Cr).     

基于eTOM的网管支撑系统集成整合的研究

以基于eTOM的IT支撑架构模型为建设标准，对中国移动IT支撑架构集成整合的目标、形式、技术等进行了探讨，对下一步网管支撑系统架构的发展作了展望。     

单根氧化锌纳米带/Au电极体系I-V特性的测量

利用电子束刻蚀和真空蒸镀法，在单要氧化锌纳米带和SiO2/Si片上，制备了金纳米电极，采用四端法对氧化锌带的电流-电压（I-V）特性进行测量。实验发展氧化锌纳米带/金电极组成的体系存在三种完全不同的I-V特性曲线，分别为对应于较淖电阻的非对称阀值型曲线以及电阻较大的整流型和线性对称曲线，我们认为这主要是由于氧化锌纳米带和电极的接触情况不同所造成的。测量表明器件在不同环境下（空气和真空）具有不同的I-V特性，表面在当测量环境由空气变为真空时，前一类的I-V特性变化不大，而后一类由整流型变为线性对称型。     

卷积码的线性系统

介绍了卷积码的线性离散时不变系统模型。从建立卷积码的状态变量方程出发,研究了卷积码的代数结构,并详细论述了基于状态变量方程描述的迭代译码算法。     

一种新的多径相关瑞利信道的数学模型：理论分析及仿真比较

产生统计独立的多径相关瑞利信道是无线信道仿真的一个基本问题.Jakes模型得到了广泛应 用,但它在统计独立性方面还存在一些问题.该文提出一种新的相关瑞利信道的数学模型.理论分析和仿真 比较表明它在计算复杂度和统计独立性方面比最初的Jakes模型及其近来发现的改进模型更加简单有效.     

岩石物理横波速度曲线计算技术

横波速度是地震勘探中的重要参数。针对实际生产中缺乏横波速度测井曲线资料，利用经验公式计算精确度不高的问题，通过对横波速度计算理论模型的研究分析，选择Blot-Gassman模型法，利用岩石矿物成分、流体成分、孔隙度及密度等测井曲线进行横波速度测井曲线的计算，并对横波速度计算技术和流程进行研究。在实际工区进行了横波速度曲线计算，计算结果与实测横波吻合程度较高，误差小于10％，该技术在储层和流体识别预测的应用中取得了较好效果。     

三峡工程三期截流三维施工仿真研究

三峡工程三期截流提前到 2 0 0 2年 11月上旬进行 ,截流难度显著增大。为了使截流工程顺利进行 ,以先进的计算机可视化技术为基础 ,采用IMAGIS软件生成三维地形图 ,用Creator建模形成导流明渠、纵向围堰及三期围堰等三维实体模型 ,最后通过运用虚拟现实技术 ,开发出三峡工程三期截流施工实时动态演示、查询系统。该系统能根据需要实现漫游 ,可以随意定位到感兴趣的区域作细部观察 ,且具有良好的交互性。通过施工仿真研究 ,将三期截流施工过程生动地显示在屏幕上 ,用以指导施工组织管理 ,为三期截流的决策和控制提供了有效的工具     

Enhanced thermal stability of a sputtered titanium-nitride film as a diffusion barrier for capacitor-bottom electrodes

The effect of a thin RuO_x layer formed on the Ru/TiN/doped poly-Si/Si stack structure was compared with that on the RuO_x/TiN/doped poly-Si/Si stack structure over the post-deposition annealing temperature ranges of 450–600°C. The Ru/TiN/poly-Si/Si contact system exhibited linear behavior at forward bias with a small increase in the total resistance up to 600°C. The RuO_x/TiN/poly-Si/Si contact system exhibited nonlinear characteristics under forward bias at 450°C, which is attributed to no formation of a thin RuO_x layer at the RuO_x surface and porous-amorphous microstructure. In the former case, the addition of oxygen at the surface layer of the Ru film by pre-annealing leads to the formation of a thin RuO_x layer and chemically strong Ru-O bonds. This results from the retardation of oxygen diffusion caused by the discontinuity of diffusion paths. In particular, the RuO_x layer in a nonstoichiometric state is changed to the RuO₂-crystalline phase in a stoichiometric state after post-deposition annealing; this phase can act as an oxygen-capture layer. Therefore, it appears that the electrical properties of the Ru/TiN/poly-Si/Si contact system are better than those of the RuO_x/TiN/poly-Si/Si contact system.